Chromatography Autosampler Vial Caps Only
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with Grey Butyl Rubber / Transparent PTFE Septa, fitted in Steel, Magnetic, Gold Caps with 8mm center holes. For use with 20mm Crimp Top Headspace Vials. 1000/CS.
Butyl Rubber Septa that is laminated with PTFE and is 55⁰ Shore A (hardness) and is 3.0mm thick. Temperature resistant from -40C to 120C.
Microsolv Technology Corporation Caps, Snap Top, with Red Rubber / PTFE Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
Red Rubber / PTFE is often the choice of labs that do not want to analyze with silicone rubber in the Septa and want a lower cost cap.
Microsolv Technology Corporation Caps, Screw Top, with Orange Red Rubber / PTFE Septa, bonded in "knurled", polypropylene, Red Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Orange-Red Silicone Rubber is more economical White Silicone Rubber and softer than Natural Red Rubber which is better for your autosamplers, minimizing damaging needles and injections systems.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, fitted in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, fitted in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Microsolv Technology Corporation Caps, Snap Top, with 1.00mm thick, Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in smooth, soft polyethylene, Natural Translucent Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Soft polyethylene caps are more pliable than other Snap Caps and are easier to place on the vial. Popular choice when using a large number of caps at one time. These caps may not seal as well as other Snap Caps and should be used with sample solvents with low volatility. This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Pre-Slit Septa, bonded in "knurled", polypropylene, Yellow Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS
Septa bonded to cap for increased performance of penetration and to prevent "Septa Plunge" into vials during injection. Designed for Waters Alliance & Acquity instruments.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, bonded in "knurled", polypropylene, Red Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
The Septa is bonded to the cap for increased performance of penetration that prevents "septa plunge" and prevents them from falling out or dislodging in the cap during transportation.Very popular and useful for HPLC or GC; save money compared to "Certified" brands.
Microsolv Technology Corporation Caps, Snap Top, with 1.0mm thick, Red Rubber / Beige PTFE Septa, fitted in smooth, soft polyethylene, Natural Transparent Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Soft polyethylene caps are more pliable than other Snap Caps and are easier to place on the vial. Popular choice when using a large number of caps at one time. These caps may not seal as well as other Snap Caps and should be used with sample solvents with low volatility.
Microsolv Technology Corporation Caps, Screw Top, Solid, with a Red-Orange Silicone Rubber / TEF liner, in "knurled", closed Black Caps. For use with 10-425mm thread,12x32mm autosampler vials. 100/PK.
Use with wide mouth autosampler vials. The Silicone Rubber / TEF liner provides a very good seal for longer term storage in autosampler vials.
Microsolv Technology Corporation Caps, Screw Top, Solid, with Silicone Rubber / PTFE Liner, fitted in knurled polypropylene, White Caps. For use with ND20 thread, storage Vials or Bottles. 100/PK.
Silicone Rubber / PTFE Liner can be used for use with Storage Vials / Bottles with 20-400mm screw threads.
Microsolv Technology Corporation Caps, Screw Top, with Natural Silicone Rubber / Natural PTFE Septa, fitted in knurled polypropylene, White Caps. For use with 24-414mm threaded EPA Style vials. ND24 threads. 100/PK.
Septa is 3.18mm (0.125") thick and can be used as an autosampler vial cap or for long term storage with any 30, 40 or 60 EPA Style vial that has 40-414 threads. Cap has a 12.5mm top hole.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, bonded in "knurled", polypropylene, Yellow Caps. For use with 9-425 thread, 12x32mm autosampler vials. 1000/CS.
Low durometer makes the Septa easier to penetrate by the autosampler needles.
Microsolv Technology Corporation Caps, Screw Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in "knurled", polypropylene, Red Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Partial Pre-Slit (Y Shape) Septa, fitted in "knurled" polypropylene, Translucent Caps. For use with 9-425 thread, 12x32mm autosampler vials. Excellent for GC and GCMS. 100/PK.
Partial slit, only in the rubber leaves PTFE to form an evaporation barrier making this a good choice for volatile samples when an autosampler requires a pre-slit Septa.Y shaped partial slit allows for better "resealing" of rubber after initial injection.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, bonded in "knurled", polypropylene, Yellow Caps. For use with 9-425 thread, 12x32mm autosampler vials. 100/PK.
Low durometer makes the Septa easier to penetrate by the autosampler needles.