Chromatography Autosampler Vial Caps Only
Chemglass Life Sciences Aluminum Seal, 11mm, Magnetic, Silver, Red PTFE/White Silicone
Aluminum Seal, 11mm, Magnetic, Silver, Red PTFE/White Silicone. The 11mm anodized aluminum seals are manufactured to fit all 11mm crimp top vials and are available in a variety of colors. The 11mm magnetic seal can be used with any instrument where the vials is transported with the use of a magnet.
Microsolv Technology Corporation Caps, Snap Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with Translucent Silicone Rubber / Natural PTFE, High Purity Septa, fitted in Aluminum, Silver Pressure Relief Caps with 8mm center holes. For use with 20mm Crimp Top Headspace Vials. 100/PK.
Silicone Rubber / PTFE Septa with Durometer of 45 Shore A, (hardness) and 3.0mm thick with Ultra Clean PTFE and Ultra Low Bleed Rubber that is made by a proprietary process for ultra high purity, low extractables and temperature durability. This Septa is good for highly sensitive analyses. No color has been added to this Septa. The lower Durometer means that this is a softer Septa and therefore better for easier penetrations by autosampler needles. Wide temperature range from -60⁰ to 200⁰C. Clear lacquered Caps have score lines that will break open at 3.0 +/ 0.5 Bar, for safety.
Trajan Scientific L-MARK Brand Cap Screw 18mm Headspace PTFE/Silicone 1.9mm, 100 Pack
L-MARK Brand Cap Screw 18mm Headspace 1.9mm Red PTFE/White Silicone Magnetic100 Pack. Made in the USA.
Chemglass Life Sciences Crimp Seal, Silver, Clear PTFE/Red Rubber
Crimp Seal, Silver, Clear PTFE/Red Rubber. Medium durometer red rubber with a .015 layer of clear PTFE. Great and economical for routine analysis. Not recommended for multiple injections.
Microsolv Technology Corporation Caps, Snap Top, with 1.00mm thick, White Silicone Rubber / Red PTFE Pre-Slit (Y Shape) Septa, fitted in smooth, soft polyethylene, Natural Transparent Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
Soft polyethylene caps are more pliable than other Snap Caps and are easier to place on the vial. Popular choice when using a large number of caps at one time. These caps may not seal as well as other Snap Caps and should be used with sample solvents with low volatility. Y Shape Pre-Slit provides a greater target area for needles and are easier to penetrate. The 1.0mm Septa is thicker than most and offers improved sealing compared with other similar Septa. Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments.
Enzo Life Sciences Matrix metalloproteinase-19 (MMP-19) fluorometric drug discovery kit, RED (1x96wells)
The MMP-19 Fluorometric (also known as fluorimetric) Drug Discovery Kit, RED is a complete assay system designed to screen MMP-19 inhibitors using a quenched fluorogenic substrate OMNIMMP RED: TQ3-GABA-Pro-Cha-Abu-Smc-His-Ala-Dab(6-TAMRA)-Ala-Lys-NH2 [TQ3=quencher; GABA=4-aminobutyric acid; Cha=L-cyclohexylalanine; Abu=2-aminobutyric acid; Smc=S-methyl-L-cysteine; Dab=2,4-diaminobutyric acid; 6-TAMRA=6-tetramethylrhodamine]. TAMRA fluorescence is thoroughly quenched by the TQ3 group until cleavage by MMPs separates the two moieties. The assays are performed in a convenient 96-well microplate format. The kit is useful to screen inhibitors of MMP-19, a potential therapeutic target. The compound NNGH is also included as a prototypic control inhibitor. Alternative name: RASI. Applications: Fluorescent detection, HTS Activity assay.
Trajan Scientific Pal Screw Cap 24Mm
PAL System Screw Cap 40CV designed for the PAL Autosampler. ND24 Silicone/PTFE Septa 3.2mm Pk of 100 pcs
Chemglass Life Sciences Standard Bonded Closure, 9mm, Blue, PTFE/Silicone Septa
Standard Bonded Closure, 9mm, Blue, PTFE/Silicone Septa. Bonded closures feature clear PTFE/Silicone liner bonded directly to the closure without the use of glue or adhesives. These bonded closures provide a cost effective, integrated, one-piece system that eliminates costly line fallout. Non-slit design.
Trajan Scientific La-Pha-Pack , Cap, Screw, Black, 10mm Pre-slit, 1.5mm, White Silicone/Blue PTFE, Combination Seal, 100 Pack. Made in Germany.
La-Pha-Pack , Cap, Screw, Black, 10mm Pre-slit, 1.5mm, White Silicone/Blue PTFE, Combination Seal, 100 Pack. Made in Germany.
Perkin Elmer US LLC Pre-Assembled Aluminum Crimp Cap with Low Bleed PTFE/Silicone (White) Septa - Skived Pressure Release, 1000/pk
We offer a variety of GC headspace vials, caps and septa to fulfil your application needs. Our patented vial and cap design incorporates pressure-relief features which guarantee safe operation with the high pressure typically developed during thermostatting. Ordinary vials and caps without these safety features may burst. All of our headspace vials have a greater wall thickness and round base which enables them to withstand pressure up to 60 psig. Low-volume sampling can be achieved by using a 6 mL vial and vial adapter. All PerkinElmer headspace vials are manufactured to specific tolerances that are guaranteed for fit and performance. Note: Due to the patent which PerkinElmer holds on the closures system of the Headspace vials, the caps, septa, and star springs cannot be sold separately. Vial Top Type Cap Type Septa Material Septa Style Quantity Crimp Top Aluminum, Skived Pressure Release PTFE/Silicone (White) Low Bleed 1000
Microsolv Technology Corporation Cap Hs Crimp Sil/Ptfe Nat/Nat
Caps, Headspace, Crimp Top, with Natural Silicone Rubber / Natural PTFE (10mil), High Purity Septa, fitted in Aluminum, Silver Caps with 10mm center holes. For use with 20mm Crimp Top Headspace Vials. BASIK Brand. 100/PK.