Labconco™ WaterPro™ PS/HPLC Polishing System for Analytical Use

Description

Labconco WaterPro™ PS/HPLC Polishing System for Analytical Use delivers Type I, 18.2 megohm-cm water with TOC less than 5ppb.

• Timed dispense for unattended operation
• Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time
• LED flashes actual megohm-cm when water quality falls below set point (water quality alert)
• Dispense manually from a valve or with dispensing gun at rate of 1.8L/min.
• TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels

• Corrosion-resistant Type 304 stainless steel front panel
• Unpigmented virgin natural polypropylene bowls w/o impurities to contaminate water
• Quiet 1/4 hp motor and rotary vane recirculation pump
• Moisture sensor detects leak and signals inlet valve to close and pump to shut down
• Wall mountable

Certifications

ETL listed (115 V models); CE marked (230 V models).

Specifications

• Certifications/Compliance: CE
• Bacterial Content: <1 CFU/mL
• Daily Output: 1 to 250 L
• Endotoxin Concentration: <0.001 EU/mL
• Feedwater Source: Pretreated Tap
• Flow Rate: 1.8 L/min.
• Product Water Type: Type 1
• Resistivity: 18.2
• Total Organic Carbon: <5 ppb
• Type: PS/HPLC Polishing System without Dispensing Gun
• Model: WaterPro PS/HPLC
• Plug Type: US
• Power Supply: 2.5 A
• Purification Method: Carbon filtration, deionization, organic adsorption, ultraviolet oxidation
• Purity: TOC Less than 5 ppb
• Width (English): 31.1 in.
• Width (Metric): 78.9 cm
• Height (English): 30.1 in.
• Height (Metric): 76.4 cm
• Depth (English): 7.5 in.
• Depth (Metric): 19 cm
• Weight (English): 85 lb.
• Weight (Metric): 38.6 kg
• Electrical Requirements: 230 V 50/60 Hz
• Voltage: 230 V
• Frequency: 50/60 Hz