Restek™ Chrome-Plated Brass Gas Regulator

Description

For use with noncorrosive, high-purity or liquified gases

Ideal with ultra-high–purity carrier gas for sensitive GC applications using MS, PID, HID or ECD detection methods.

• Brass construction for minimum dead volume
• Oxidation-resistant chrome plating
• 10μm sintered bronze filter, metal-to-metal seals for long-term leak tightness, and PTFE-resin seats
• Type 316 stainless-steel regulator diaphragm with 1/4 in. FPT-fitting outlet-valve ensures ultra-high–purity control of gases and leak-free shutoff
• 2 in. (5.1cm) dia. gauge displays pressure in psi/kPa
• Multiturn shutoff handle
• Helium leak-test–certifiable to 2 x 10^-8cc/sec
• Operating temperature range: -4° to +60°C (24.8° to 60°F)
• Fully assembled and tested
• Single-stage regulators: Use where there is secondary pressure regulation downstream Dual-stage regulators: Recommended for stable outlet control when using high-pressure gas-cylinders (secondary pressure regulation not needed)

Specifications

• Connection Type: 0.25 in. NPTF outlet valve
• Delivery Pressure: 100 psi
• Diaphragm Material: 316L Stainless Steel
• Type: Gas Regulator
• Filter Material: 10μm Sintered Bronze
• Flow Capacity: 0.1 SCFH
• For Use With (Application): Ideal with ultra high purity carrier gas for sensitive GC applications using MS, PID, HID or ECD detection methods
• For Use With (Equipment): Noncorrosive, high purity or liquified gases
• Gases Measured: Air
• Includes: Multiturn shutoff handle
• Inlet: 590
• Inlet Gauge Pressure: 0 to 4000 psi
• Material: Chrome-plated Brass
• No. of Stages: Dual
• Operating Temperature Range (English): 24.8°F to 60°F
• Operating Temperature Range (Metric): -4°C to +60°C
• Outlet Gauge Pressure: 30 in., 0 to 200 psi
• Pressure Range (Inlet): 3000 psi
• Pressure Range (Outlet): 0 to 100 psi
• Seal Material: Metal
• Seat Material: PTFE Resin
• Diameter (English) Gauge: 2 in.
• Diameter (Metric) Gauge: 5.1 cm