Filtered Search Results

Labconco™ SpillStopper™ Work Surface for 4 Ft. Protector™ Premier™ Hood
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Labconco SpillStopper™ Work Surface is dished and contoured to conform to the interior liner to contain spills.

Product Type | SpillStopper Work Surface (4 ft.) |
---|---|
For Use With (Equipment) | Protector XL Laboratory Hood |
Material | Epoxy Resin |
For Use With (Application) | Laboratory Fume Hood Work |
Labconco™ SpillStopper™ Work Surface for 6 Ft. Protector™Premier™and Protector™XL Hoods
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Labconco SpillStopper™ Work Surface is dished and contoured to conform to the interior liner to contain spills.

Product Type | Work Surface |
---|---|
For Use With (Equipment) | Protector XL Laboratory Hood |
Material | Epoxy Resin |
For Use With (Application) | Laboratory Fume Hood Work |
Labconco™ SteamScrubber™ Glassware Washers
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Versatile and efficient glassware washers that can handle a wide range of wide-mouth beakers and general purpose labware.

Inlet Water Temperature (English) Recommended | 120°F |
---|---|
Volume (English) | 6.73 ft.3 chamber volume |
Description | SteamScrubber Glassware Washer |
Water Consumption | As low as 12.9 L |
Min. Purified Water Pressure | N/A, can be supplied from pressurized and non-pressurized sources |
Volume (Metric) | 190.6 L chamber volume |
Inlet Water Temperature (Metric) Recommended | 49°C |
Material | Stainless Steel (304) |
Inlet Water Temperature (Metric) Max. | 71°C |
Inlet Water Temperature (English) Max. | 160°F |
For Use With (Application) | Ideal for College and University, Government, Pharmaceutical and Industrial Labs or Any Facility Utilizing Reusable Glassware |
Max. Pressure | 120 psi (inlet) |
Includes | Upper and lower standard racks |
Flow Rate | Hot water inlet 1.25 GPM (4.7 LPM), Cold water inlet of 3.5 GPM (13.2 LPM) |
Product Type | Laboratory Glassware Washer |
Wash Cycles | 9 programs with 1 to 9 total cycles |
Inlet Water Temperature (English) Min. | 120°F |
Certifications/Compliance | UL61010, CAN/CSA C22.2, CE |
Inlet Water Temperature (Metric) Min. | 49°C |
Display | Full-color Touch Screen |
Labconco™ FlaskScrubber™ Glassware Washers
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Versatile and efficient glassware washers designed for efficient and consistent washing of narrow-neck glassware and general labware.

Inlet Water Temperature (English) Recommended | 120°F |
---|---|
Volume (English) | 6.73 ft.3 chamber volume |
Description | FlaskScrubber Glassware Washer |
Water Consumption | As low as 12.9 L |
Min. Purified Water Pressure | N/A, can be supplied from pressurized and non-pressurized sources |
Volume (Metric) | 190.6 L chamber volume |
Inlet Water Temperature (Metric) Recommended | 49°C |
Material | Stainless Steel (304) |
Inlet Water Temperature (Metric) Max. | 71°C |
Inlet Water Temperature (English) Max. | 160°F |
For Use With (Application) | Ideal for College and University, Government, Pharmaceutical and Industrial Labs or Any Facility Utilizing Reusable Glassware |
Max. Pressure | 120 psi (inlet) |
Includes | Lower spindle rack |
Flow Rate | Hot water inlet 1.25 GPM (4.7 LPM), Cold water inlet of 3.5 GPM (13.2 LPM) |
Product Type | Laboratory Glassware Washer |
Wash Cycles | 9 programs with 1 to 9 total cycles |
Inlet Water Temperature (English) Min. | 120°F |
Certifications/Compliance | UL61010, CAN/CSA C22.2, CE |
Inlet Water Temperature (Metric) Min. | 49°C |
Display | Full-color Touch Screen |
Labconco™ Protector™ XL™ Fume Hoods
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Protector™ XL™ Fume Hoods with By-Pass Block are low-velocity and high performance. Feature chemical-resistant fiberglass, composite panel liners, Eco-Foil™ air foil and aerodynamic Clean-Sweep™ airflow openings.

Receptacle Type | GFCI |
---|---|
Height (Metric) | 149.9 cm |
Depth (English) | 37.7 in. |
Color | Glacier White |
Material | Powder-coated Steel |
Product Type | Benchtop Fume Hood |
Depth (Metric) | 80.5 cm |
Voltage | 100/115 V |
Height (Metric) Sash Opening | 71.1 cm |
Amperage | 10 A |
Certifications/Compliance | SEFA 1; CFR 29, Part 1910; ASTM E84-09C; NFPA 45; ANSI Z9.5; ASHRAE 110; CAN/CSA C22.2 No. 61010.1; UL 61010-1; SEFA 8, Cabinet Surface Finish Tests; UL 1805 |
Lighting Type | LED |
Coating | Powder |
Liner Material | Chemical-resistant, Fiberglass-reinforced Composite |
Hertz | 50/60 Hz |
Labconco™ LabSolutions™ Powder Detergent
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Removes grease, blood, agar, protein digestates, and other contaminants

Form | Powder |
---|---|
Product Type | Detergent |
Color-coded | Yes |
pH | 12.5 |
Scent | Unscented |
For Use With (Application) | For use in Glassware washers, removes range of contaminants including Protein digestates, Agar, Blood and Grease |
Sterility | Non-sterile |
Labconco™ Work Surface Accessory, Oval Polypropylene Cupsink
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Easily remove waste from your laboratory worktable with the Labconco Oval Cupsink.

Labconco™ SpillStopper™ Work Surfaces Cupsink Cover
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
SpillStopper™ Cupsink Cover provides a continuous work surface when a cupsink is not in use

Labconco™ LabSolutions™ Low-Foaming Liquid Detergent
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Removes a wide range of contaminants

Labconco™ LabSolutions™ Neutralizing Acid Rinse

Mild acid corrects pH, reducing alkaline detergent residue

Labconco™ Protector™ Filtered Fume Hood Accessory, ADA Remote Control
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
For use with Protector Echo and Airo Filtered Fume Hood
Labconco™ Rotary Vane Vacuum Pumps
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Designed for use with Labconco Freeze-dry Systems—compact size easily fits into freeze-dry system cabinets
Includes | Pump, four each one liter bottles of vacuum pump oil and one exhaust filter with oil mist and odor filter elements. ON/OFF switch, power cord with plug for direct connection of pump to Labconco freeze dryers, one 12.7mm (1/2 in.) O.D. and one 19.1mm (3/4 in.) O.D. inlet adapter |
---|---|
Frequency | 50/60 Hz |
Material | Cast Aluminum |
Overall Width (English) | 6.5 in. |
Maximum Pressure | 1 atm |
Max. Vacuum | 2 x 10-3 mBar |
Pump Type | Rotary Vane Vacuum Pump |
Overall Height (Metric) | 26.4 cm |
Labconco™ WaterPro™ PS Water Polishing Station
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
WaterPro™ PS Water Polishing Station with filters, prefilters and cartridges for Labconco WaterPro PS and RO Water Purification Systems.
Flow Rate | 1.1 L/min. |
---|---|
For Use With (Equipment) | WaterPro™ PS polishing station |
Resistivity | 16 to 18.2 MΩ·cm |
Product Water Type | Type 1 |
Daily Output | 1 to 250 L |
Weight (English) | 9.5 lb. |
Feedwater Source | Reverse Osmosis Tap |
Endotoxin Concentration | <0.001 EU/mL |
Bacterial Content | 0.001 CFU/mL |
Weight (Metric) | 4.3 kg |
Total Organic Carbon | <30 ppb |
Labconco™ Canopy Hood
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Vent nontoxic odors, heat, and steam with a Labconco Canopy Hood.
Height (Metric) | 45.7 cm |
---|---|
Depth (English) | 30 in. |
Product Type | Canopy Hood |
Depth (Metric) | 76.2 cm |
Height (English) | 18 in. |
Labconco™ Flat Work Surface
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Extend your work space with the Labconco Flat Work Surface, perfect when paired with the Labconco Fiberglass 30 and Basic™ hoods
Height (Metric) | 3 cm |
---|---|
Depth (English) | 30 in. |
Product Type | Flat Work Surface |
Depth (Metric) | 76 cm |
Color | Black |
Length (English) | 30 in. |
Material | Epoxy |
Cut Style | Without Cutout |
Height (English) | 1.25 in. |