Freezer Storage Racks
Freezer storage racks help you make efficient use of space in chest and upright freezers, deep freezers, undercounter and ultra-low temperature freezers. To help you organize and optimize your storage, freezer storage racks, towers and shelf kits can be modular or color-coded for easy identification. Freezer baskets can be made from stainless steel, non-corrosive aluminum, clear acrylic or polycarbonate.
Freezer door opening time is typically limited to help maintain freezer temperatures, and racks can help users quickly access specific samples. Racks also allow users to temporarily remove a section of samples from the freezer without exposing the remainder to unwanted temperature changes.
Freezer racks may have horizontal access (for upright freezers) or vertical openings (for chest freezers). Some are wire baskets or sliding drawers and some have wheels to facilitate movement. Freezer storage racks may also have locks for security. For liquid nitrogen storage, racks may be “canes” or “straws” that hold multiple tubes in an upright position.
For optimal storage, choose racks designed to fit your particular freezer model or product. Racks are also made to fit specific sizes of freezer boxes. Most freezer boxes are roughly 5 inches square, but heights range from 2 to 5 inches depending on the size of tubes they hold.
Sigma Aldrich Fine Chemicals Biosciences TRNRTH UPRGHT FRZR RCK 2X3CONF
NC3667398 TRNRTH UPRGHT FRZR RCK 2X3CONF
Research Products International Corp Cryo-Safe Cooler with Gel filled Lid, Holds 0.5, 1.5, or 2.0 ml Tubes, 32 Tube Capacity
This cooler safely holds thirty-two 0.5, 1.5 or 2.0 ml microcentrifuge tubes or cryogenic vials at a temperature below -15ºC for approximately 1 1/2 hours. Use included insert to hold 0.5ml microcentrifuge tubes. Store at -20ºC for 24 hours prior to use. Ideal for protecting valuable samples stored in a freezer with defrost cycle. Polycarbonate cooler body is filled with a non-toxic gel which cannot contact tubes; ensures markings and labels on tubes are safe. Gel-filled polycarbonate lid extends temperature holding time; secured closed with a built-in wire carrying handle. .
WARNING This product can expose you to chemicals including Bisphenol-A, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Cole-Parmer Argos Technologies PolarSafe Upright Freezer Drawer Rack for 96/384-Well Plates, 96-Well Boxes, or Boxes w/ 2 1/8" Max H, 6 x 4 Array
Drawer racks allow easy access to microtiter plates and microtube boxes
Thermo Scientific Revco™ Chest Freezer Vial Racks
Organize samples and save time with Thermo Scientific™ Revco™ Chest Freezer Vial Racks, for use in Revco ultra-low temperature chest freezers.
Corning™ ThermalTray™ Thermo-conductive Platforms
Support Corning CoolRack™ and CoolSink™ sample modules in liquid temperature sources such as melting ice, water baths, and liquid nitrogen.
Thermo Scientific™ Forma™ Side-Access Box Racks
Access ultra-low storage in upright freezers when sliding drawer racks are not preferred with these side-access box racks, available with and without boxes.
Bel Art™ Modular Ultra-Low Five-Box Freezer Racks
Link together side-by-side or can be securely stacked for horizontal and vertical storage.
Eppendorf 3P Freezer Rack, Upright Slide, 1 Rack/Unit
Drawer or side access. For sample access, racks with drawers stay in the freezer compartment. Only the relevant drawer with the freezer boxes of interest is pulled-out. All other boxes stay in the cold inner area of the ULT freezer. Eppendorf drawers are optimized for smooth movement at -80C for ergonomic handling. When using side access racks, sample access results in removal of most of the storage boxes out of the cold inner area of the ULT freezer. The side access rack has to be pulled out to have access to the samples. Racks for chest freezers can be equipped with locking rods to secure freezer boxes when pulling-out the rack tower. Stainless steel or aluminum. By standard, there are two types of rack materials available.. Stainless steel. Stable/ robust for longevity and higher capacit. For freezer boxes up to 136 mm x 136 mm for high flexibility regarding boxe. Optimized cooling conditions by special design for improved sample safet. Aluminum.