Ovens and Furnaces
Ace Glass, Inc. Wire probe, J thermocouple, 120in, PTFE covered, male mini plug
Wire probe, J thermocouple, 120in, PTFE covered, male mini plug
Ace Glass, Inc. Wire probe, T thermocouple, 120in, PTFE covered, male mini plug
120 insulated wire temperature probe with type T thermocouple is PTFE-covered and has a male mini plug. Provides measurement from -200 degrees C to 200 degrees C.
Ace Glass, Inc. Probe, Pt100, PFA, 1/8in diameter, 8in length, 10ft lead with LEMO plug
Probe, Pt100, PFA, 1/8in diameter, 8in length, 10ft lead with LEMO plug
Ace Glass, Inc. Sensor, J, 1/4x48in, inconel sheath, 12 foot lead
Sensor, J, 1/4x48in, inconel sheath, 12 foot lead
Ace Glass, Inc. Sensor probe, Pt100 thermocouple, 1/8in OD x 3in Inconel sheath, 120in phone plug lead
Sensor probe, Pt100 thermocouple, 1/8in OD x 3in Inconel sheath, 120in phone plug lead
Grainger Induced Draft Furnace Blower 115V
The Packard 14C433 is an induced draft furnace blower designed for use with oil or gas fired heating systems. It features a 1/3 HP motor with permanently lubricated ball bearings and automatic reset thermal overload protection. The blower has a listed airflow of 850 CFM and develops 0.5 inches static pressure at high speed. It measures 14-1/2 x 14-1/2 x 8 inches and has a 6 inch diameter outlet. This UL listed blower can be used as a retrofit or replacement blower for many furnace applications.
Memmert Universal Heating and Drying Laboratory Oven UF110. 110L - 115 Volt, Forced-Air Convection, Stainless Steel Construction with SingleDISPLAY digital controller.
Memmert Universal heating and drying Oven - this model is the 115 volt, forced-air convection, with SingleDISPLAY digital controller. Interior dimensions 560/480/361-W/H/D mm. Includes (2) Stainless Steel Grid Shelves, Quick Start Guide, Calibration Certificate and Power Cord - Working Range 10C above ambient to +300C.
NABERTHERM INC Ashing furnaces designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis.
Ashing furnace LV ../11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.
Cole-Parmer Type-K Gen-Purpose Heavy-Duty Probe Mini-Connector, 24" L Grounded 5ft Coil Cord
Heavy-Duty extra-long penetration probes are designed for soft and semi-soft materials. Response Time: 2 seconds or greater. ABS handles provide a lightweight design for ease of use along with durability. Probe handles feature a strain relief spring that protects the cable connection against damage due to repeated flexing and tugging. Each probe comes with color coded ANSI miniconnectors: type J-black, type K-yellow, and type T-blue.
Omega Engineering, Inc. Ready-Made Insulated Thermocouples with Kapton, PFA, Glass Braid Insulation and Molded Connectors, 5/pk
Made from Special Limits of Error Wire. 1 and 2 meter (36 and 72") Lengths Standard. Molded Subminiature Connector with Integral Strain Relief/Spool.