Dry Block Incubators
Chemglass Life Sciences Digital Temperature Monitor for Process Reactors - PT-100 Probe Receptacle, 120V, LED Display
Digital temperature monitor designed for process reactors and laboratory equipment. It accepts PT-100 probes and provides a bright LED display and an audible alarm to indicate out-of-range temperatures. The unit is housed in a compact stainless steel cabinet and includes a side-mounted clamp for 1/2 in support rods.
- Accepts PT-100 probe receptacle for accurate temperature sensing.
- Bright LED display for easy reading.
- Built-in audible alarm for out-of-range conditions.
- Available in 120 V and 220 V versions.
- Compact stainless steel cabinet with side clamp for 1/2 in support rods.
- Separate on/off switch and internal circuit breaker for safety.
- Dimensions: 2.6 in high x 3.2 in wide x 5.5 in deep.
Alkali Scientific™ BSH200 MyBlock Mini Dry Bath
Compact, fits in the palm of your hand Exchangeable blocks for 0.2 to 50ml tubes Clear cover ensures temperature uniformity Room temperature to 37°C in just 2 minutes Portable; optional 12V power adapter The new Alkali Scientific™ BSH200 MyBlock Mini Dry Bathfits almost anywhere and can even be used "on-the-go" in cars, boats or wherever a 12 volt power source is available. Benchtop control of sample temperature has never been this easy or economical.Its simple touch pad control with digital display is designed for "set and walk away" temperature selection and unrivaled accuracy. At less than 5 inches wide, MyBlock Mini is truly the first personal block incubator.
Research Products International Corp Digital Dry Bath Incubators, Single Chamber with Single Block, 7 x 10 x 5 Inches
State of the art digital dry bath incubators are featured in single and double block styles. Digital temperature control and a removable hinged cover provide the highest level of temperature accuracy and uniformity. Incubators are supplied with either one or two Combination Flip Blocks depending of model. These unique blocks accommodate 14 x 0.5ml and 24 x 2.0ml tubes on one side and six PCR tube strips; 48 x 0.2ml tubes; or one PCR plate on the flip side. Chambers will also accept other standard size blocks with dimensions of 23 x 3 3/4 x 2 inches.
Electron Microscopy Sciences EMS MyBlock™ Mini Dry Bath Block for 2x50 ml Centrifuge Tube
For use with Mini Dry Bath.
Electron Microscopy Sciences EMS MyBlock™ Dry Bath I Single Chamber without blocks, 230 V
The EMS MyBlock series has several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of temperature.
MyBlock's transparent lid promotes better temperature uniformity and minimizes stratification in the block by maintaining a warm air jacket layer while reducing energy consumption by minimizing heat loss. The hinged lid can be flipped open or easily removed (lifted off) to accommodate taller tubes.
Universal blocks accept tubes from 0.5 to 2.0 ml and, with just a quick flip to the other side, accomodate 0.2 ml tubes, PCR strips or in the dual block model only a PCR plate. Other blocks are available for tubes up to 50 ml. Without blocks.
Electron Microscopy Sciences EMS MyBlock™ Mini Dry Bath, with Cooling, 115 V, RT -25 to 100°C temp range
With its compact construction, broad temperature range, and multiple block options, the MyBlock™ Mini is the perfect tool for laboratory incubations. The simple touch pad controls and a digital display provide for "set and walk away" temperature selection and unrivaled accuracy. While perfect for bench use, the optional 12V vehicle power adapter expands the utility of the MyBlock™ Mini to field use. At less than 4.3" wide, MyBlock™ Mini is truly the first personal block incubator.
Temp range: RT -25 to 100°C
Minimum Programable: 0°C
Footprint: 4.3" x 6.4"
Height: 5.5"
Research Products International Corp HEATING BLOCK, HOLDS 5 X 50 ML TUBES, 3 1/2 X 3 X 2 INCHES HIGH
Heating Block Module for the Digital Dry Baths. Ideal block modules for use with Digital DryBath (sku 246201). Each block measures 3 1/2 x 3 x 2 1/2 inches high.
Ace Glass, Inc. Dynabloc, 9601-16 Instatherm bath insert, 22mm OD (4dram/16mL)vial size, 14 holes
DYNABLOC INSTATHERM 4DRAM/16ML
Electron Microscopy Sciences EMS MyBlock™ Dry Bath II Dual Position with 2 universal blocks, 115 V
The EMS MyBlock series has several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of temperature.
MyBlock's transparent lid promotes better temperature uniformity and minimizes stratification in the block by maintaining a warm air jacket layer while reducing energy consumption by minimizing heat loss. The hinged lid can be flipped open or easily removed (lifted off) to accommodate taller tubes.
Universal blocks accept tubes from 0.5 to 2.0 ml and, with just a quick flip to the other side, accomodate 0.2 ml tubes, PCR strips or in the dual block model only a PCR plate. Other blocks are available for tubes up to 50 ml. With 2 Quick-Flip universal block.
Electron Microscopy Sciences EMS MyBlock™ Dry Bath II Dual Chamber without blocks, 115 V
The EMS MyBlock series has several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of temperature.
MyBlock's transparent lid promotes better temperature uniformity and minimizes stratification in the block by maintaining a warm air jacket layer while reducing energy consumption by minimizing heat loss. The hinged lid can be flipped open or easily removed (lifted off) to accommodate taller tubes.
Universal blocks accept tubes from 0.5 to 2.0 ml and, with just a quick flip to the other side, accomodate 0.2 ml tubes, PCR strips or in the dual block model only a PCR plate. Other blocks are available for tubes up to 50 ml. Without blocks.
Cole-Parmer Techne PAD SEALING
Concentrator blows an inert gas over the surface of your samples via stainless steel needles (not included). Blown gas in combination with the heat from the heater produce ideal conditions for fast efficient evaporation. Insert needles into a silicone membrane in any configuration. Fully adjustable gas reservoir provides accurate height control. Maximum vertical traveling distance is 32 cm. Maximum gas usage is 15 L/min. Order PTFE-coated needles for use with corrosive samples.