Standard Incubators
Percival Scientific Biological Incubator, I30NLH6, 9.6 cu. ft., non-lighted, 3 tiers, pan-type humidifier, dehum. and advanced RH sensor, 2-44° C ±0.5°, IntellusUltra controller
The I30NLH6 incubator is frequently used for C. elegans, nematodes, yeast/fungi, insects, bacteria and BOD. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and adv. sensor tightly control humidity. Three white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Sheldon Manufacturing Inc RI28 INCUBATOR 32.5CUFT
LABORATORY INCUBATOR, LARGE CAPACITY, 30.8 CU FT, SOLID DOOR w/ VIEW, ROLL-IN FLOOR, OUTLET, ACCESS PORT, 115V This incubator provides extra large capacities while minimizing the amount of floor space needed. The temperature in this large space is kept uniform by integrating a highly responsive microprocessor with an appropriately sized heating element. An independent secondary temperature controller offers the added security of over temperature protection. Our unique forced air circulation system creates a one-pass circulation pattern that provides both exceptional temperature uniformity and rapid heat recovery. The chamber floors are ruggedly reinforced to support roller apparatus or shakers. The SMI31 is supplied with six sturdy shelves that will not sag or bend under heavy loads. More information available at www.shellab.com
Sheldon Manufacturing Inc LABORATORY INCUBATOR 6CUFT
LABORATORY INCUBATOR, 6 CU FT, SS INTERIOR, INNER GLASS DOOR, OUTLET, ACCESS PORT, 115V. SHEL LAB general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded. More information available at www.shellab.com
Percival Scientific Biological Incubator, I41LLVLH1, 37.2 cu. ft., horizontal and vertical IncuWhite LED lighting, 4 tiers, pan-type humidifier, elec. RH sensor, 4-44° C ±0.5°, IntellusUltra control
The I41LLVLH1 incubator is frequently used for mosquitos and other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 220 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. A pan-type humidifier and standard humidity sensor provides additive humidity.Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
BRINSEA PRODUCTS Ovaview High Intensity Egg Candler
Candling monitors the development of the embryo within the egg allowing infertile eggs to be removed before they become infected and contaminate others. Egg candling also monitors the rate of enlargement of the airspace within the egg as a gauge of incubation humidity and for more detailed analysis of development such as vein growth. The Brinsea OvaView High Intensity egg candler is designed to be either hand-held or can be left on a work surface. Battery powered for convenience it uses very high output high efficiency LED illumination – so no bulbs to replace and no concerns about overheating the eggs during inspection. Supplied with both a flexible black ring for standard eggs plus a special ring for smaller eggs to seal against the eggshell. The larger power drain means that rechargeable batteries are needed – 4 AA batteries required but not supplied. Suitable for candling quail, pheasant and other dark or mottled eggs.
Hach Company Low Temperature BOD Incubator
The Model SRI6P-2 B O D incubator is thermoelectric cooled eliminating the need for a refrigeration compressor The incubators include a mechanical convection system to ensure even air distribution digital temperature set controller over temperature limit control and a temperature display Two 75 pound capacity shelves are included A one amp interior outlet allows the use of shakers stirrers roller bottles or BODTrak apparatus Low Temperature Incubators are ideal for testing sewage and wastewater as well as other low room temperature applications 220VExterior dimensions 30 x 31 5 x 33 5 in (76 2 x 80 01 x 85 09 cm)
Chemglass Life Sciences Incubator, 5.6 Cu. Ft., High Heat Decontamination, IR, Single Chamber, 120V
Anti-Corrosion Anode. Patented Copper-Housed HEPA Filter for Superior Contamination Prevention. Factory Pre-Set, Door Thermostat. Pre-Heated CO2 Gas Inlet for Increased Temperature Uniformity. Front-Mounted Connections for Convenience. Over Temperature and CO2 Alarms. Inner Glass Viewing Door. Stainless Steel Chamber and Autoclavable Door Gasket Make Cleaning Easy. 5-Year Limited Warranty. The CLS-2447 series of CO2 incubators offers dependable infrared (IR), CO2 sensor control and is ideal for QA / QC applications. The incubators include an anti-corrosion anode which allows the use of distilled or tap water in the compact water jacket. De-ionized water should not be used. Anti-contamination features make cleaning a breeze and the CO2 sample port is located on the front control panel for quick and easy access. Incubators have microprocessor controllers. The humidity level inside the chamber is maintained at approximately 95%.
Electron Microscopy Sciences Oven Incubator 120 V
This Oven/Incubator with an aluminum inner chamber, and venting will provide many years of long service in busy labs. The cast aluminum chamber provides for dependable temperature uniformity and the vent efficiently expels moisture and vapors. The unit has a magnetic latch that assures positive door closure and a thermometer port at the top of the oven that accommodates any partial immersion thermometer. The unit heats up rapidly (56 degree C in 9 minutes) and comes with a removable shelf.
Electron Microscopy Sciences Advanced Protocol Incubator Model 51028066, 120 V, 66 L chamber
Dual convection for application versatility-fan speed adjustable from 0 to 100%.
Internal socket allows the use of equipment, such as shakers or stirrers, inside the unit.
Easy to clean, corrosion-resistant stainless-steel interior (AISI 304).
Broad temperature range from 5 degree C above ambient to 105 degree C-suitable for drying applications.
Temperature uniformity of +/- 0.6 (Fan off) and between +/-0.2 degree C and +/- 0.4 degree C (Fan full speed) (measured at 37 degree C).
Temperature stability of +/- 0.1 degree C (at 37 degree C).
Intuitive user interface for setting temperature.
Large, easy to read vacuum fluorescent display.
Internal glass door allows sample viewing without impacting temperature. Exceptionally small footprint. Convection Technology: Dual Convection.
Chamber: 66 L
