Bath Accessories
Julabo USA Inc Each, Cooling water solenoid for HL/SL/MS/MX heating circulators
Bath Accessories, Julabo, Solenoid valve for cooling water with Stakei connection. For use with HL-4, SL-6, SL-12, SL-26 heating circulators. Enables active cooling through the integrated cooling coil via tap water. Be sure to specify 115V or 230V when ordering. 8 mm Barb fittings.
Julabo USA Inc PRESTO A40 Circulator 208V
JULABO PRESTO Highly Dynamic Temperature Control Systems for highly precise temperature control of external applications Systems offer rapid heating and cooling rates The hydraulically sealed heat exchanger design affords a wide working temperature range without changing fluids All units feature a color TFT touch screen interface for unit operation external integration and programming Instruments cover a working temperature range of -85 to 250C Up to three user levels with password management Systems incorporate USB (host and device) Ethernet SD-card slot RS232 port stand-by input and Pt100 external temperature sensor port The graphite bearing centrifugal pressure pump is lubricated by the bath fluid All models (except for A30) can operate under pressure control to safeguard pressure sensitive applications (such as jacketed glass reactors) Air and water-cooled versions available Additional accessories available
Chemglass Life Sciences Hose Connector Adapter NW8 For Use With M16 Nut
Hose Connector Adapter NW8 For Use With M16 Nut Stainless Steel for HUBER CIRCULATOR FITTINGS
Chemglass Life Sciences Triple Insulated Hose, 1ft Length
Triple Insulated Hose, 1ft Length. For connection of circulators to Chemglass reactors. Hoses are flexible stainless steel tubing, insulated with fiberglass and silicone. Temperature range -80 to 200° C. Both ends have a M16 x 1 Female fitting for attachment directly to our inlet/outlet connections see CG-1969-A. Adapters are available for connection to most circulators.PLEASE NOTE: TWO HOSES ARE REQUIRED PER REACTOR.
Research Products International Corp Lab Armor Chill Bucket with Beads and 2 Chill Packs, 1 Package
This innovative chill bucket, with lid and bead bag, keeps samples at -20°C to +8°C for up to eight hours while on a benchtop. Supplied with 2 liters thermal beads and chill packs that eliminate ice and maintain a dry and clean environment. Beads also keep tubes and vessels in place without use of racks.
TA Instruments PLC Adapter for PCA, Provides Trigger Cable Interface to Omnicure S2000 Elite PCA, Required for Triggered Operation and Synchronization
The Waters TA Instruments PLC Adapter provides the interface required for connecting the trigger cable to the Omnicure S2000 Elite PCA. It enables triggered operation by ensuring proper synchronization between the PCA and external control systems. Designed for precise integration, this adapter enhances functionality and allows laboratories to fully utilize the PCA in automated or synchronized workflows. The adapter is built for reliability and durability, supporting consistent performance during photocalorimetry studies requiring external triggering.
Sigma Aldrich Fine Chemicals Biosciences Micro particles based on p
MICRO Micro particles based on p
Julabo USA Inc Each, Particle filter for cooling water; for use with water-cooled circulators
Bath Accessories, Julabo, Particle filter for cooling water cycle (for water-cooled models). For use with: FPW52-SL, FPW52-SL, FPW52-SL-150C, FPW55-SL, FPW55-SL, FPW55-SL-150C, FPW90-SL, FPW90-SL, FPW90-SL-150C, FPW91-SL, FPW91-SL, FW95-SL, PRESTO W40, PRESTO W50, PRESTO W50t, PRESTO W55, PRESTO W56, PRESTO W80, PRESTO W80t, PRESTO W85, PRESTO W85t, PRESTO W91, PRESTO W91tt, PRESTO W91x, PRESTO W92, PRESTO W92tt, PRESTO W92ttx, PRESTO W92x, FLW1701, FLW1703, FLW2503, FLW2506, FLW4003, FLW4006, FLW7006, FLW11006, FLW20006.
Chemglass Life Sciences ChemRxnHub Manifold System to Include: 1ea CG-1969-X-12 (Outlet Manifold Assembly Complete) and 1ea CG-1969-X-14 (Inlet Manifold Assembly Complete)
ChemRxnHub Manifold System to Include: 1ea CG-1969-X-12 (Outlet Manifold Assembly Complete) and 1ea CG-1969-X-14 (Inlet Manifold Assembly Complete). The Chemglass manifold system for use with CG-1949-X ChemglassRxnHub™ frame system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as illustrated with Triple Insulated Flexible Hose. Hoses have welded on S.S. Tool-Free™ fitting on one end and M16 Female fitting on the other. Hoses to connect manifold to circulator are NOT supplied and must be ordered separately. PLEASE NOTE: TEMPERATURE LIMITATIONS ON MANIFOLD IS -60 TO 200°C. Specifications:Circulator Size End Fitting: M16 For Use with Reactor Capacity: 300mL to 5L Reactor Jacket Fitting: Tool-Free™ Fits Support Frame: CG-1949-X S.S. Pipe OD: 3/4"
Julabo USA Inc Pt100 sensor, 24" x 1/4", PTFE coated, 12' cable with Lemosa connector
Pt100 temperature sensor, PTFE coated stainless steel for use in corrosive environments; 24" long x 1/4" OD with 12' cable and 4-pin Lemosa connector. For use with any JULABO circulator having external Pt100 sensor capability. Shielded cable.
Sigma Aldrich Fine Chemicals Biosciences AldrichR firestone valve c1EA
A rapid efficient and foolproof purge valve for 100% replacement of air in reaction vessels. Automatically controls gas flow and pressure. No special fittings needed. Connect reaction vessel house-vacuum and purge gas to the firestone valve via 10mm O.D. connections. Conserve expensive gases by decreasing flow to almost zero after purging.
Bellco Glass, Inc. Quad Additon Assembly , 45mm Universal
Quad Addition Assembly For GL45 sidearms. Manufactured from 316l stainless steel with electropolish finish ra 32 or better outside only. Used for gl45 sidearms. Includes polypropylene blue open top screw cap and white silicone liner. Individual ports for liquid additions or redundant vent overlay. Vertical Side Arm vessels for acid, base, antifoam, media & other additions. MADE IN THE USA