Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
USA Scientific Inc TempPlate semskrt PP 0.1 mL
TempPlate semskrted polypropylene 0.1 mL 96-well PCR plate, low profile, straight sides, natural, 10/box
Ace Glass, Inc. 2000mL, one-piece jacketed pressure reactor with #25 center, (3)#15, (1)#7 side necks, #11 Ace-Thred inlet/outlet, complete with addition funnel, condenser, pressure manifold and stirring assembly
2000mL one-piece jacketed pressure reactor with a #25 center neck, (3) #15 and (1) #7 side necks, and a #11 Ace-Thred connection for 3/8 tubing on the jacket inlet/outlet. Reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade. Supplied with addition funnel, condenser, pressure manifold, and stirring assembly.
Alkali Scientific Griffin Low Form Beakers, Type 3.3 Borosilicate Glass, Printed Graduations 500 mL - 6/Pk
Griffin Low Form Beaker constructed from Type 3.3 borosilicate glass, with superior resistance to thermal shock, with high chemical stability, and with clear printed graduations for accurate measurement. The low profile design provides improved stability during use, while the reinforced rim enhances durability and reduces the risk of breakage. It features a pouring spout for smooth and controlled liquid transfer. Suitable for heating, mixing, and preparation of solutions, this beaker performs reliably in demanding laboratory environments. Commonly used in research, industrial, and educational labs, it maintains transparency and structural integrity even after repeated exposure to heat and chemical reagents.
Ace Glass, Inc. Flask, reaction, 3L, jacketed, 168mm O-ring groove flat flange, 170mm bottom OD x 260mm H, #11 Ace-Thred joints on jacket inlet/outlet for use with 3/8in ID tubing
3L jacketed reaction flask with round bottom, and #11 Ace-Thred joints on jacket inlet/outlet for use with 3/8 I.D. tubing. 168mm o-ring groove flat flange is used to seal a head, instead of a flat gasket. Jacketed for temperature control of ingredients. Supplied with CAPFE o-rings. Dimensions: 170mm bottom O.D. x 260mm H.
Ace Glass, Inc. Reactor body, glass only, photochem, 250mL, jacketed, stopcock bottom outlet
Reactor body, glass only, photochem, 250mL, jacketed, stopcock bottom outlet
Ace Glass, Inc. 32 liter graduated cylindrical jar with side indents
32L graduated cylindrical jar with side indents for easier handling. Made of heavy wall glass. Also available with poly safety coating. Not for use with heat, pressure, or vacuum applications.
Ace Glass, Inc. Funnel, 1000mL, jacketed, pressure equalizing, addition, 24/40 joints, 4mm PTFE stopcock
1000mL jacketed pressure equalizing addition funnel with 24/40 top and bottom joints, and a 4mm PTFE stopcock. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Funnel has size D hose barbs for 3/8 ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduations are in both ascending and descending volume. Bottom drip tip extends to the edge of the bottom inner joint. Top outer joint is reinforced for safety.
Ace Glass, Inc. Flask, reaction, jacketed, 5L, 4in grooved flange, 28/15 O-ring ball joints on jacket inlet/outlets
5L jacketed reaction flask with a 4 grooved flange, and 28/15 o-ring ball joints on the jacket inlet/outlets. Flask should be used with a stainless steel quick release clamp. Supplied with one CAPFE o-ring (PTFE encapsulated silicone).
Sklar Instruments Pitcher/Beaker, Sklar, Stainless Steel. This product is 4-7/8 in. x 7-1/8 in. with a volume of 2000ml. It does not have a handle. EA/1.
Pitcher/Beaker, Sklar, Stainless Steel. Sklar's Stainless Steel Beaker may be used for a variety of things, including use in the laboratory, or holding sterilized instruments in solution until their use in specific procedures. This product is 4-7/8 in. x 7-1/8 in. with a volume of 2000ml. It does not have a handle.
Alkali Scientific Low Form Beaker with Handle, Printed Graduations, and Anti Slip Base, Polypropylene (PP), 250mL, 36/Case
The Low Form Polypropylene Beaker is designed for safe and accurate liquid handling in laboratory, research, and production environments. Molded from durable, chemically resistant polypropylene, this beaker provides excellent strength and clarity for routine mixing, sample preparation, and heating within polypropylene temperature limits. The wide, low form design improves stability on benches and hot plates, while the integrated ergonomic handle allows controlled one handed pouring. Bold printed graduations provide quick visual volume checks, helping improve measurement accuracy during routine lab work. A textured anti slip base enhances grip on smooth surfaces, reducing the risk of spills or tipping. Ideal for academic laboratories, biotechnology, pharmaceutical, industrial testing, and general laboratory workflows requiring reliable liquid handling.
Bellco Glass, Inc. Polypropylene Griffin Grad Beaker,3000mL
These beakers are useful for general laboratory procedures and are autoclaveable. They have blue imprinted graduations to aid in viewing and dispensing liquids. Material: polypropylene Size: 3000mL x 500mL Dimensions: 174x214mm
Bellco Glass, Inc. Beaker-Std Wall,50mL
Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. ideal for general laboratory use. Features an easy pour spout, white permanent graduations and large marking square. MADE IN THE USA Sizes: 50ml Dimensions: 46x60mm
Bellco Glass, Inc. Polypropylene Griffin Grad Beaker,25mL
These beakers are useful for general laboratory procedures and are autoclaveable. They have blue imprinted graduations to aid in viewing and dispensing liquids. Material: polypropylene Size: 25ml x 5mL Dimensions: 31x47mm