Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Ace Glass, Inc. 500mL pressure vessel body, jacketed, 60mm flange, round bottom, #11 Ace-Thred inlet/outlet, use with 3/8in ID tubing
500mL pressure vessel body, jacketed, 60mm flange, round bottom, #11 Ace-Thred inlet/outlet, use with 3/8in ID tubing
Ace Glass, Inc. 500mL pressure vessel body, jacketed, 100mm flange, round bottom, #11 Ace-Thred inlet/outlet, use with 3/8in ID tubing
500mL pressure vessel body, jacketed, 100mm flange, round bottom, #11 Ace-Thred inlet/outlet, use with 3/8in ID tubing
Accuflow Systems Saint-Gobain Chemware Beaker, PFA, 125 mL, Griffin
Saint-Gobain Chemware PFA Griffin Beaker for ultra-pure laboratory applications. The low-metal-ion PFA construction provides broad chemical resistance and is suitable for trace-metal analysis; the machined bottom enables rapid heat transfer and the beaker is microwave and hot-plate compatible up to 500°F (260°C).
- Material: PFA (perfluoroalkoxy, Teflon)
- Nominal capacity: 125 mL; brim capacity: 164 mL
- Beaker style: Griffin (low-form), molded graduations for measuring
- Dimensions: height 60.8 mm; neck I.D. 59.7 mm
- Temperature rating: up to 500°F (260°C); microwave compatible
- Features: machined bottom, transparent and non-stick surface for easy cleaning
- Applications: ultra-pure sample handling, trace metal analysis, chemical-resistant heating and mixing
Ace Glass, Inc. 2000mL, one-piece jacketed pressure reactor with #25 center, (3)#15, (1)#7 side necks, 28/15 ball joint inlet/outlet, complete with addition funnel, condenser, pressure manifold and stirring assembly
2000mL one-piece jacketed pressure reactor with a #25 center neck, (3) #15 and (1) #7 side necks, and a 28/15 o-ring ball joint on the inlet/outlet. Reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade. Supplied with addition funnel, condenser, pressure manifold, and stirring assembly.
Ace Glass, Inc. 5000mL pressure vessel body, jacketed, 150mm flange, 0-10mm valve, 28/15 ball joint bottom outlet, 28/15 ball joints on jacket inlet/outlet.
5000mL pressure vessel body, jacketed, 150mm flange, 0-10mm valve, 28/15 ball joint bottom outlet, 28/15 ball joints on jacket inlet/outlet.
Ace Glass, Inc. 500mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and super magnet stirring assembly
500mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and super magnet stirring assembly
Ace Glass, Inc. Flask, jacketed, 1L, 100mm(4in) ground Duran; O-ring groove flange, #11 Ace-Thred™; inlet/outlet for3/8in ID tubing
3L jktd cylindrical reaction flask with 100mm (4) Duran flat, ground flange and o-ring groove. Features a water/steam jacket with #11 Ace-Thred connections on jacket inlet/outlets for use with 3/8 I.D. tubing. Flask is supplied with one CAPFE o-ring for Duran flange.
USA Scientific Inc TempPlate semskrt PP 0.2 mL
TempPlate semskrted polypropylene 0.2 mL 96-well PCR plate, standard depth, white, 10/box
Sigma Aldrich Fine Chemicals Biosciences Aldrich(R) large glass beaker capacity 10 L | 1EA
Aldrich(R) large glass beaker capacity 10 L | 1EA
Bellco Glass, Inc. Borosil Tall Form Beaker with Spout 100mL
Borosil Beaker Griffin Tall Form with Spout ISO 3819 Borosilicate uniform wall thickness 100mL CS/40Borosil Tall Form Beakers are the ideal container for use when stirring, mixing, or heating liquids. Each beaker has uniform wall thickness distribution which aids in the balance between thermal resistance and mechanical strength, which is ideal for heating liquids. The pouring spout design allows for clean and precise pouring. Each Beaker comes graduated to assist in measuring content. All sizes come standard with a durable enameled space for marking. Complies with IS 2619/ ISO 3819 and DIN 12331. *500mL not covered in IS, ISO, and DIN standards.SpecificationsMaterial: 3.3 Borosilicate GlassColor: ClearCapacity: 100 mLGraduation Color: WhiteApprox O.D. x Length: 48mm x 80mmClass/ Quality Grade: Type IQuantity Per Case: 40Beakers are not calibrated. Calibration on beakers is for reference only. We can not provide a calibration certificate for beakers.
