Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Ace Glass, Inc. Funnel, 1000mL, jacketed, pressure equalizing, addition, 24/40 joints, 4mm PTFE stopcock
1000mL jacketed pressure equalizing addition funnel with 24/40 top and bottom joints, and a 4mm PTFE stopcock. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Funnel has size D hose barbs for 3/8 ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduations are in both ascending and descending volume. Bottom drip tip extends to the edge of the bottom inner joint. Top outer joint is reinforced for safety.
Ace Glass, Inc. 15L CYL,JKTD,FLASK,BP I/O
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. 2000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, #11Ace-Thred inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
2000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, #11Ace-Thred inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
Ace Glass, Inc. 20mL 24/40 Barrett moisture test receiver, jacketed sidearm, PTFE plug
20mL Barrett type moisture test receiver with 24/40 standard taper joints for use in determining the water content in petroleum and bituminous material. Features a jacketed side arm and is supplied with 1:5 solid PTFE stopcock plug.
Ace Glass, Inc. 150L CYL,JKTD,FLASK,BP I/O
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. 150L CYL,JKTD,FLASK,3in BP
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Med Vet International 59mm Length Compression Plate, 8-Holes 2.4mm Diamter, J1074E
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Ace Glass, Inc. Immersion well, quartz, jacketed, quartz inlet, 48odx255mm
Immersion well, quartz, jacketed, quartz inlet, 48odx255mm
Ace Glass, Inc. 10L CYL,JKTD,FLASK,BP I/O
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. 2000mL pressure vessel body, one-piece, jacketed, #25 center, (3) #15, (1) #7 side necks, round bottom, #11 Ace-Thred connections on jacket inlet/outlet, use 3/8in tubing.
2000mL one-piece jacketed round bottom pressure vessel with a #25 center neck, (3) #15 and (1) #7 side necks, and a #11 Ace-Thred connection for 3/8 tubing on the jacket inlet/outlet. Vessel is part of pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade.
Ace Glass, Inc. Cooler, condensate, jacketed, model R220EX, glassware sets R, RB and R, part 46510
Borosilicate glass replacement jacketed condensate cooler for use in rotary evaporator Model R220EX glassware sets C, RB & R; part 46510. Inner ball joints include CAPFE o-rings. Includes black SVL caps & red GL thread caps.
Ace Glass, Inc. 150L CYL,JKTD,FLASK,3IN BP
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. Ace Glass Fully Jacketed Funnel, 1000 mL, #80 Ace-Thred Bottom
This jacketed filtration apparatus is designed for use with 75 mm membranes or filter paper, making it ideal for applications requiring temperature control, such as solvent recycling. Its fully threaded design eliminates the need for traditional clamping.
- Jacketed for temperature control.
- Designed for 75 mm membranes or filter paper.
- All threaded apparatus for clamp-free operation.
- Coarse glass fritted disc, interchangeable with an all PTFE support.
- Features a GL80 wide mouth bottle.
- Includes a #15 Ace-Thred vacuum connection.
Ace Glass, Inc. 1000mL, two-piece jacketed pressure reactor, complete with#11 Ace-Thred inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
1000mL, two-piece jacketed pressure reactor, complete with#11 Ace-Thred inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
Ace Glass, Inc. 500mL, two-piece jacketed pressure reactor, complete with#11 Ace-Thred inlet/outlets, 60mm head with #15 center, (2)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
500mL, two-piece jacketed pressure reactor, complete with#11 Ace-Thred inlet/outlets, 60mm head with #15 center, (2)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly