Syringe Pumps
Sigma Aldrich Fine Chemicals Biosciences KDS LegatoTM 200 series sy1EA
Infuse only dual syringe pump. Accomodates 2 syringes. User definable flow rates with selectable target volume or time values to control the total infusion volume.Features.nbspHolds one or two syringes from 0.5 muL to 140 mL.nbspHigh resolution color touch screen.nbspReal time clock.nbspUnparallel ease of use.nbspTouch pad lock feature.nbspLED light on front panel.nbspFull metal chassis.nbspBuilt in syringe table.nbspUp to 75 lbs linear force.nbspAdvanced microstepping techniques.nbspBuilt in RS485 interface.nbspUSB port.nbspI/O TTL interface.nbspContinuous mode of operation.nbspSpill dam
Sigma Aldrich Fine Chemicals Biosciences KDS LegatoTM 270P series s1EA
Programmable Legato 270P push/pull pump with user defined program configurations of up to 800 steps. Up to 40 programs of 20 steps each can be stored in memory.Features.nbspHolds four syringe from 0.5 muL to 140 mL.nbspHigh resolution color touch screen.nbspReal time clock.nbspUnparallel ease of use.nbspTouch pad lock feature.nbspLED light on front panel.nbspFull metal chassis.nbspBuilt in syringe table.nbspUp to 75 lbs linear force.nbspAdvanced microstepping techniques.nbspBuilt in RS485 interface.nbspUSB port.nbspI/O TTL interface.nbspContinuous mode of operation.nbspSpill dam Programmable
Sigma Aldrich Fine Chemicals Biosciences KDS stainless steel syring1EA
These rugged 316 stainless steel syringes are a perfect complement to the KDS 410 high pressure syringe dispenser. They eliminate the problem of breaking glass syringes when using high pressures. Compatibility with most chemicals is assured as wetted parts are 316 stainless steel Viton(R) for the 20 50 and 100 mL sizes and Perfluoroelastomer for the 8 mL size.Compatible with most syringe pumpsFully autoclavableGood resistance to most chemicalsSafe SOLUTIONon when using high pressure dispensing
Sigma Aldrich Fine Chemicals Biosciences KDS single syringe pump se1EA
Series 100 infusion pumps combine precision and simplicity with ease of use and exceptional durablity. The 230 V pumps are CE compliant. Advanced microprocessor-controlled syringe pumps designed especially for low pulse-free flow rates.Easy setup1. Select syringe size2. Enter volume to be dispensed3. Enter flow rate then press start buttonFeaturesHolds any size syringe from 10 muL to 60 mL syringesAutomatic volume control and shutoffLast settings stored in memoryContinuous dispense volume displaySimple menu-driven setup syringe diameter (selected from displayed table) dispense volume and dispense flow rate
Sigma Aldrich Fine Chemicals Biosciences KDS LegatoTM 100 single sy1EA
Infuse only single syringe pump. Accommodates syringes from 0.5 muL to 60 mL. User definable flow rates with selectable target volume or time values to control the total infusion volume.FeaturesHolds one syringe from 0.5 muL to 60 mLStall detectionHigh reSOLUTIONon color touch screenUnparalleled ease of usePassword protected touch displayRun LED light on front panelFull metal chassisBuilt in syringe tableUp to 30 lbs/13 kg linear forceAdvanced microstepping techniquesBuilt in RS485 interfaceUSB portI/O TTL interfaceContinuous mode of operationSpill dam
Sigma Aldrich Fine Chemicals Biosciences KDS LegatoTM 100 single sy1EA
Infuse only single syringe pump. Accommodates syringes from 0.5 muL to 60 mL. User definable flow rates with selectable target volume or time values to control the total infusion volume.FeaturesHolds one syringe from 0.5 muL to 60 mLStall detectionHigh reSOLUTIONon color touch screenUnparalleled ease of usePassword protected touch displayRun LED light on front panelFull metal chassisBuilt in syringe tableUp to 30 lbs/13 kg linear forceAdvanced microstepping techniquesBuilt in RS485 interfaceUSB portI/O TTL interfaceContinuous mode of operationSpill dam
Sigma Aldrich Fine Chemicals Biosciences KDS stainless steel syring1EA
These rugged 316 stainless steel syringes are a perfect complement to the KDS 410 high pressure syringe dispenser. They eliminate the problem of breaking glass syringes when using high pressures. Compatibility with most chemicals is assured as wetted parts are 316 stainless steel Viton(R) for the 20 50 and 100 mL sizes and Perfluoroelastomer for the 8 mL size.Compatible with most syringe pumpsFully autoclavableGood resistance to most chemicalsSafe SOLUTIONon when using high pressure dispensing
Sigma Aldrich Fine Chemicals Biosciences PTfE syringe tubing gauge1EA
With KEL-f Luer hub.A septum to be pierced with these PTfE needles must be punctured with a hollow SS needle. The PTfE needle is then threaded through. After threading the SS needle is withdrawn allowing the septum to seal around the PTfE needle.for 20 ga PTfE use Z126756 (14 ga SS) 18 ga PTfE use Z126764 (13 ga SS) 16 ga PTfE use Z126772 (12 ga SS).
Instech Pump 11 Pico Plus Elite inf/wd program dual syringe pump (704506), US cord
Syringe pump, Harvard Apparatus model 11 Pico Plus Elite, infuse/withdraw, programmable, dual syringe. Touch screen interface. US power cord. Optimized for smooth flow at very low rates.
*ADAPTAS SOLUTIONS LLC 250uL Syringe 1/4-28 w/PTFE Tip for V3 Pump
250uL Syringe 1/4-28 w/PTFE Tip for V3 Pump.
David Kopf Instruments Model UMP3T-1 UltraMicroPump 3 with SMARTouch™ Controller
The UltraMicroPump 3T (UMP3T) manufactured by World Precision Instruments is a versatile pump which uses micro syringes to deliver picoliter to milliliter volumes. The pump is optimum for applications that require injections of precise and small amounts of liquid. With its touchscreen controller, UMP3 can displace as little as 0.53 μL/step (using 10 μL syringe with 60 mm scale length). This item does not come with the upper bracket. The catalog number for the bracket is NC1756394 (manuf#1770C).
AGI NORTH AMERICA INC Syrris Atlas Syringe Pump for precise dosing, flow rates from 5μL to 200mL/min - ideal for autosampling, pH control and full data logging capabilities
Atlas XL Syringe Pump offers a small footprint and is lightweight to be easily moved between lab benches.Functions -Dual-Dosing Mode allows the use of each syringe to dose independently-Continuous-Dosing Mode combines both dosing channels to provide a single continuous flow-Autosampling Mode allows the collection of 6 samples from the process at user defined times-pH-controlled dosing automatically doses acid or base to keep the pH of the reaction within a user defined range-Multi-port valves allow the dosing of multiple reagents -All data is recorded (dosed amounts, sensor readings) for easy analysisIncluded: -25mL syringes as standard (syringe sizes from 50μL to 5mL are available)-4 port valves (ports are channels which can be set as inlets or outlets)-Starter kit including tubing and blanking plugsOrder informationTo perform autosampling, pH control and temperature-dependent dosing additional Syrris sensors, nodes and modules are required.