Pump Drives and Controllers
Pump Drives and Controllers
Heidolph™ Hei-FLOW Ultimate Peristaltic Pump
For reproducibility while pumping and dosing
Welch™ Programmable Vacuum Controller
Designed to automatically regulate the applications vacuum level precisely, conviniently and without using precious bench space
Welch™ Vacuum Pump On/Off Foot Switch
Vacuum pump accessory that provides hands-free operation of Welch DryFast diaphragm and WOB-L piston pumps.
Masterflex™ L/S™ Standard Digital Drives
Masterflex™ L/S™ Standard Digital Drive offers a maintenance-free high-accuracy motor and a graphical interface – makes setup and operation easier than ever!
Masterflex™ I/P™ Digital Process Drives
Precision Masterflex™ I/P Digital Process Drives offer washdown capability, programmable dispensing, and accurate low-maintenance motors
Masterflex™ L/S™ Analog Variable-Speed Console Drives
Masterflex™ L/S™ Analog Variable-Speed Console Drives are compact and cost effective for general fluid transfer applications
Masterflex™ L/S™ Precision Variable-Speed Console Drives with Remote I/O
Masterflex™ L/S™ Precision Variable-Speed Console Drives feature a digital display that gives repeatable control
Masterflex™ L/S™ Digital Console Process Drives
Masterflex L/S Digital Console Process Drives are ideal for fluid transfer, dispensing, and metering applications in laboratory, process and wash-down environments
Cole-Parmer Masterflex L/S Fixed-Speed Drive, 60 rpm; 115 VAC
The Masterflex L/S economy fixed-speed drives are compact and ideal where space is limited. These drives feature a lighted power switch on the front of the drive that lets you know when the pump is running. They accept five different pump head types: Standard, Easy-Load, Easy-Load II, Easy-Load 3, and Cartridge pump heads.
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Variable-Speed, Compact, Drive, 35 to 200 rpm; 115/230 VAC
These compact drives are a perfect when space is limited, as they fit just about anywhere. The variable-speed design makes them ideal for when you need to pump fluid at a higher rate. Drives accept one Easy-Load or standard pump head. Use drives with L/S Precision tubing—accepts sizes L/S 13, L/S 14, L/S 16, L/S 25, and L/S 17. Only silicone and C-Flex tubing formulations are recommended for use with L/S 25 and L/S 17 sizes.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Low-Flow Peristaltic Pump, Variable Speed, 0.14 to 4 mL/min, Manual Control; 12 VDC
These cost-effective peristaltic pumps provide variable flow and exceptional life performance in a compact package. Select from three different motor speeds, and three different tubing sizes to acheive flow rates from 0.03 to 4 mL/min.
Cole-Parmer Masterflex L/S Fixed-Speed Drive, 6 rpm; 115 VAC
The Masterflex L/S economy fixed-speed drives are compact and ideal where space is limited. These drives feature a lighted power switch on the front of the drive that lets you know when the pump is running. They accept five different pump head types: Standard, Easy-Load, Easy-Load II, Easy-Load 3, and Cartridge pump heads.
Cole-Parmer Masterflex L/S Fixed-Speed Drive, 20 rpm; 115 VAC
This is an economical speed drive with seven speeds for reliable general transfer and feed applications. The drive is stackable and ideal for lab, field or process feed applications. The drive is IP22-rated and protected from water falling vertically.
Cole-Parmer Masterflex L/S Fixed-Speed Drive, 12 rpm; 115 VAC
The Masterflex L/S economy fixed-speed drives are compact and ideal where space is limited. These drives feature a lighted power switch on the front of the drive that lets you know when the pump is running. They accept five different pump head types: Standard, Easy-Load, Easy-Load II, Easy-Load 3, and Cartridge pump heads.
Cole-Parmer Digital Process Drive w/ Powder-Coat Steel Housing; 650 rpm
Masterflex I/P Digital Process Drive with Powder-Coat Steel Housing; 650 rpm. Precision digital drives offer washdown capability, programmable dispensing, and accurate low-maintenance motorsMinimum flow rate is 0.0006 LPM (0.0001 GPM); maximum flow rate is 26 LPM (6.9 GPM) with two stacked I/P Easy-Load or Standard pump headsHousings are NEMA 4X (IP66) rated for washdownConstructed with a rugged powder coated steel housing with anodized aluminum base
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Variable-Speed Digital Drive with Remote I/O, 1 to 100 rpm; 90 to 260 VAC
These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); control start/stop via footswitch 77595-35 or handheld remote 07528-80.
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Analog Variable-Speed Console Drive, 7 to 200 rpm; 115 VAC
Drives accept nine different pump head types: Standard, Easy-Load, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge, PTFE tubing, and PTFE-diaphragm. Drives 07555-00 and -05 are not recommended for use with the PTFE-tubing and PTFE-diaphragm pump heads.
US Plastic Corporation MAGNETIC DRIVE KYNAR PUMP
TE-5.5K-MD March® Magnetic Drive Kynar® Pump with 1/3 HP, 115/230v, 1 Phase TEFC Motor Max temp 200 F
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Digital Drive with Open-Head Sensor, Ethernet/IP Network-Compatible, 0.1 to 600 rpm; 115/230 VAC
These precision drives offer digital and analog remote control (I/O) options and simple programming—ideal for automated process and network applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad or remotely; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.
Paw Bioscience Products MTS LAB-PUMP LINE LONG
This item has a minimum order quantity of 25 pieces per supplier requirements. MTS LAB-PUMP LINE LONG
AVANTOR MASTERFLEX (VWR LLC) Masterflex Digital Benchtop Gear Pump System, 0.91 mL/rev, 75 psi; 90 to 260 VAC
Calibrate, copy, and dispense features produce precise, pulseless batching and dispensing. View pump performance continually. Retrieve displacement and flow values by pump head size. These precision systems are easily operated from the intuitive, multilanguage LCD front panel or optional foot switch 07523-92 for hands-free on/off control. The IP33-rated enclosure protects internal components from damage. Service kits 07144-42 and 74012-52 include: gears, suction shoe, shaft seals, and springs Service kit 74012-22 includes: gears, bushings, and seals
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P Variable-Speed Hazardous-Duty Drive, 10 to 430 rpm; 115V
Masterflex I/P variable-speed hazardous-duty drive, 10-430 rpm, 115V
Accuflow Systems Precision Digital Drive Motor With Graphical Interface, Masterflex, L/S, Easy-Load, Ii Pump Head (Thin Wall Tubing), Flow Rates Of 0.001-3400 Ml/Min
This precision digital drive and pump head offers a maintenance-free high-accuracy motor and a graphical interface – makes setup and operation easier than ever! Flow rates of 0.001 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size. Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually. This pump drive includes a 6-ft (1.8m) line cord with IEC 320/CEE22 socket and are shipped with country specific plug/cord set as well as a Masterflex™ L/S™ Easy-Load™ II Pump Head featuring automatic retention which holds precision (thin-walled) tubing securely in place without manual adjustment. Just load the tubing and start the pump.
AVANTOR C O PAW BIOSCIENCE PRODUCTS MTS LAB-ADDITION LINE 10/PK
NC1765951 MTS LAB-ADDITION LINE 10/PK
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P Variable-Speed Air-Powered Drive, 100 to 650 rpm
Use this variable-speed air-powered drive when electrical power may be unsafe or impractical. For safe operation, carefully ground to protect from static electricity.
Cole-Parmer Masterflex I/P Digital Modular Drive with Remote Input/Output, 6 to 650 rpm; 115/230 VAC
I/P modular drives feature reversible pumping while allowing you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering and critical transfer applications. Splash-resistant ABS plastic controller housing and epoxy finished steel drive housing are IP33 rated. A 6-ft (1.8-m) cable connects drive and controller—optional extension cable 07557-51 is available to extend distance to 15 ft (4.5 m).
- 1
- 2