Pump Plunger Assemblies
Thomas Scientific MiniVac 1L Polystyrene Bottle; includes Transfer Cap
Simple, safe, cost effective laboratory waste removal system The Argos MiniVac waste collection system was designed with safety, convenience and bench-top space in mind. The MiniVac system replaces the need for glass waste containers; eliminating the risk of breakage and contamination. The MiniVac flask and cap sit in a safety reservoir basin thatcollects liquid should flask overflow, crack or leak. Full flasks can be transferred safely by using supplied transfer cap. Small footprint (7.5 in.); easy clean up with 70% isopropyl alcohol. The system includes a disposable 1L polystyrene flask, plastic reservoir basin, polypropylene cap with barbed fittings and tubing. Clear PETG plastic safety reservoir collects liquid in case flask cracks or leaks Use as stand-alone waste collection system or overflow vessel Polypropylene barbed cap fittings eliminate risk of broken glass rod fittings Use with in-house vacuum
BURKLE INC PumpMaster petrochem. liquids, PP/Nitrile r., blue
The blue-grey PumpMaster manual overpressure pump is the ideal choice for dosing and transferring non-flammable petroleum products. Equipped with high-quality NBR seals, it ensures safe and reliable handling of petrochemical liquids. The PumpMaster range offers a convenient solution for filling, transferring, and emptying canisters and drums. It includes three universal plugs that fit container openings from 1.83 to 2.36 inches (46.5 to 60 mm), allowing quick and secure adaptation without exact thread specifications. Perfect for industrial, petrochemical, chemical processing, and laboratory applications requiring safe manual liquid handling and transfer.
Electron Microscopy Sciences Carbon (Graphite) Rods Spectro-Grade, ⅛" diameter, 12" OAL
Carbon Rods (graphite) with an impurity level of 2ppm or less with a maximum level element of each of 1 ppm. Ideal for all TEM, SEM and other critical applications.
Diameter: 1/8"
OAL: 12"
BURKLE INC Thread adapter S 56x4 (Tri-Sure) outer- S 64x5 outer
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.
Grainger Black Pipe Nipple Threaded 1x5 In
The Grainger 14J808 is a 14-inch diameter, 8-inch deep plastic pail with a bail handle and a tight-fitting lid. It has a capacity of 5 gallons and is made from high density polyethylene in natural white color. The pail has graduations on the side for measuring contents. It can be used for a variety of applications including mixing, storing, and transporting viscous materials, liquids, powders, pellets, and small parts. The pail is chemical and corrosion resistant. It meets FDA requirements for food contact.
LONGER PUMP Pumps/ peristaltic pumps/ Longer Pump OEM PUMP T100-SV-10&YZ1515X-A, Multi-control Modes, Flow Rate: ≤430ml/min, Good EMC Performance, Low Vibration, CE Certified
Pumps/ peristaltic pumps/ Longer Pump OEM PUMP T100-SV-10&YZ1515X-ASpecificationSpeed: ≤100rpmSpeed resolution: 0.1rpm*Direction control: Direction is controlled by external switch signal. CW when switch is open, CCW when switch is closed.*Start/stop control: Start/stop is controlled by external switch signal. Pump runs when switch is open, stops when switch is closed.*BCD dial switch speed control: The speed is divided into 15 grades. BCD position 1-F corresponding to 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100(rpm)*External speed control (optional): 4-20mA, 0-5V, 0-10V, 0-10kHzCommunication control: RS485 interface,compatible both with Longer OEM protocol or Modbus protocolCommunication Pump ID: Pump ID range is 1-30Bit rate: 1200bps or 9600bpsPower-off memory: Return to previous status when powered onPower supply: DC24V/50W
Grainger Black Pipe Nipple Threaded 1/2x2 In
The Grainger Approved Black Pipe Nipple is made from carbon steel and has National Pipe Thread ends. It is available in sizes ranging from 1/8 inch to 2 inches diameter, and lengths from 1 inch to 12 inches. The nipple has a working pressure of 850 PSI at 70°F. It conforms to ASTM A733 and is for use in general purpose air, water, oil, natural gas and steam applications. The nipple is zinc coated for corrosion resistance.
Electron Microscopy Sciences Edwards EMF 3 Replacement Odor Element
Replacement part for the EMF3 oil mist filter. The EMF3 is used with the Edwards E2M1.5 vacuum pump.