Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Grainger Corrugated Tubing PE 3/4 in 100 ft
The 3/4" Corrugated Loom Tubing from Grainger is flexible, split, and corrugated to protect wires, cables, and hoses. Made from polyethylene, it operates between -20°F and 176°F. With a 3/4" inside diameter, it is sold by the foot in lengths from 25' to 1000' and can be cut as needed. The design allows bending for routing and is suitable for indoor and outdoor use, protecting against abrasion, moisture, and chemicals. The split design enables easy insertion of wires and cables without disconnecting fittings, ideal for various protection applications.
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 3-Stop, PVC, 1.52 mm ID; 12/PK
Three-Stop PVC Color-coded Autoanalysis Tubing for Ismatec Pumps is USP Class VI tubing that is Phthalate-free. It has a long pumping life and exhibits a wide range of acid and chemical resistance, thus making it an ideal choice for Pharmaceutical industries. Plasticizer is very tightly bonded into the material, preventing any leaching of component chemicals into the medium being transported, maintaining its sterility. The tubing is transparent, which allows visual observation of tubing contents. It also offers very low gas permeability and can withstand high pressure contents.
Tubing is also called TAAT / microbore and auto analysis.
The overall length of Lab PVC 95625-series stop tubing is 16" (406 mm). The legacy Ismatec stop tubing was 400 mm long.
Order extension tubing under "Accessories". For technical assistance selecting tubing formulations and sizes, contact our Application Specialists.
Chemglass Life Sciences Tubing, Silicone, Peroxide-Cured Silcon, Size 25, 3/16" ID x 5/16" OD x 1/16" Wall Thickness x 50' Long
Peroxide-cured Silicone Tubing is designed for use in applications where flexibility, resiliency and durability are required.Its inner smooth surface reduces the risk of particulate entrapment and microscopic buildup during fluid transfer. Tubing is FDA food grade compliant, entirely non-toxic, non-hemolytic and non-pyrogenic.It also meets 3-A Sanitary Standards, FDA 21 CFR Part 177. 2600 Criteria and NSF 51 Standard.Withstands temperature extremes from -100F to 500F (350F maximum for NSF applications). May be low pressure steam sterilized in-line or autoclaved at up to 121C in a normal autoclaving cycle.May be sterilized repeatedly but if tubing becomes relaxed or gummy it should be replaced.Sold in standard lengths of 50ft.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PTFE, 1/4"" ID x 5/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Good for high-purity work. PTFE tubing withstands extreme temperatures. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Certification: Resin is FDA-compliant (21 CFR 177.1550) Temperature range: -400 to 500¿F (-240 to 260¿C) Sterilize: Autoclave, ethylene oxide, or dry heat.
Accuflow Systems MFLEX SILICONE TUB. #17 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex platinum-cured silicone tubing, L/S 17, 25 ft. Ensure optimal performance from your Masterflex pump Slightly greater clarity than peroxide-cured tubing Smooth surfaces; lower pr
Accuflow Systems Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer3/8 in.idx5/8 in.od x 350 ft spool.
Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer3/8 in.idx5/8 in.od x 350 ft spool. Shore A 60 durometer,made with animal free compounds, ClassVI approved
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 3/8"" X 1/2""- 25 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
Accuflow Systems Altafluor 480 UHP PFA - available in coiled hose and schedule 40 pipe - 480 UHPPFA 1/8" X 3/16"- 50 FT
Altafluor 480 UHP PFA (Ultra High Purity Perfluoroalkoxy) is the product of choice for applications involving extreme chemical resistance combined with high purity requirements. This tubing is made exclusively from high molecular weight 100% virgin high performance resins to resist stress cracking and provides excellent chemical resistance (even to common fluorosurfactants). It has low permeation and a smooth surface finish. Unlike standard HP PFA tubing products, this tubing has superior flex life values comparable to those of PTFE. FDA approved for food contact and in compliance with FDA regulation 21 CFR 177.1550. Meets requirements of USP Class VI, and is chemically inert to nearly all industrial chemicals and solvents, has higher thermal stability than FEP and is translucent in appearance. It is certified to NSF 51, NSF 61 AND NSF 372 and meets or exceeds SEMI F57 AND C-90 requirements for semiconducters. Altafluor 480 UHP PFA is compatible with flare or conventional fittings.
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LAB 0.64MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-Lab, 0.64 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX PHARMED 26 200FT
Masterflex I/P Precision Pump Tubing, PharMed BPT, I/P 26; 200 ft, Avantor
Accuflow Systems TUBING MFLEX PHARMED #82 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex PharMed BPT Tubing, I/P #82, 25 ft. Applications: Cell and tissue culture work and pharmaceutical uses. Also good for light-sensitive samples. Characteristics: Nontoxic; nonhemolytic; extremely
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 1.60MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 1.60 mm ID; 12/PK, Avantor
Perkin Elmer US LLC 1.0 mm I.D. PTFE Liquid Rinse Feed Tube, 700 mm
The tubing assembly is compatible with the AS9x, and S10 autosamplers as well as the FIAS and FIMS instruments. Other flow injection PTFE tubing assemblies are also available B0191058 (110 mm length) and B0198097 (300 mm length) and come with blue screw fittings at both ends.
AVANTOR MASTERFLEX (VWR LLC) Flexelene FX6-8N FX Flexible Polyethylene, Non-DEHP 3/8 x 1/2"" Tubing, 100 Ft
Applications:Food and beverage processing, instrumentation, pure-water transfer, water conditioning, Characteristics: Plasticizer-free, 78 A durometer, can be used with barbed fittings, abrasion-resistant, excellent chemical compatibility, economical. Colored Flexelene™ tubing available upon request. Certification: Produced with compounds listed by NSF International Standards 51 and 61, and are FDA compliant Temperature range:-40¿F to 170¿F (-40¿C to 76¿C) Sterilize: With ethylene oxide
ATLANTIC BIOPHARM SOLUTIONS LLC MC 1/2IN TUBE OD X 1/4IN MNPT
Stainless Steel Compression Tube Fitting, Male Connector, 1/2 in. Tube OD x 1/4 in. Male NPT,