Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PTFE, 3/8 ""x 1/2"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Good for high-purity work. PTFE tubing withstands extreme temperatures. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Certification: Resin is FDA-compliant (21 CFR 177.1550) Temperature range: -400 to 500¿F (-240 to 260¿C) Sterilize: Autoclave, ethylene oxide, or dry heat.
McKesson General Medical IV EXT SET 7 IN TUBING 48/CS
IV Extension Set 7 Inch Tubing 1.9 mL Priming Volume DEHP
AVANTOR MASTERFLEX (VWR LLC) PLATINUM CURED SILICONE TUBING
NC2752093 PLATINUM CURED SILICONE TUBING
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PFA, 1/32"" ID x 1/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -320 to 500¿F (-195 to 260¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 1.22MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 1.22 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX SILICONE 89 10FT
Masterflex I/P High-Performance Precision Pump Tubing, Platinum-Cured Silicone, I/P 89; 10 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) Microbore tubing, 0.030"" x 0.090""OD, 100 ft/roll
Microbore Tubing, Translucent, 0.030" x 0.090"OD, 100 ft/roll, Formulation: Tygon ND-100-80Applications: General laboratory and pharmaceutical use, especially with precision injection or dispensing applications. Also excellent with low-flow peristaltic pump applications.Characteristics: Extremely flexible. Non-toxic; nonpyrogenic; biocompatible. Crystal clear.Certifications: Resin meets USP Class VI requirements.Temperature range: ¿25 to 185¿F (¿31 to 85¿C)Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 3/16"" ID x 1/4"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) MSTRFLX TBNG PURIFLEX 87 10FT
Masterflex B/T PerfectPosition Pump Tubing, Puri-Flex, B/T 87; 10 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PFA, 7/32""ID"" ID x 5/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -320 to 500¿F (-195 to 260¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) SILICONE TUBING 0.89MM ID 50FT
NC3363804 SILICONE TUBING 0.89MM ID 50FT
AVANTOR MASTERFLEX (VWR LLC) ChemFluor TSPTFE-0125-031 PTFE Tubing, 1/16"" x 1/8""; 50 ft/Pk
Applications: Chemical transfer and pharmaceutical processes. Characteristics: Most flexible fluoropolymer. Excellent chemical compatibility. Translucent. Certification: FDA compliant. Temperature range: ¿450 to 550¿F (¿268 to 288¿C). Sterilize: Autoclave, ethylene oxide, or dry heat.
Perkin Elmer US LLC 1.0 mm I.D. PTFE Tubing, Qty. 1 m
Other tubing with 0.35 mm - 1.75 mm I.D. available separately.
