Tubing Connectors and Fittings
MSC SMC PNEUMATICS KQ2T07-00A 1/4" OD, Brass/Polybutylene Push-to-Connect Union Tee 145 Max psi
SMC PNEUMATICS KQ2T07-00A 1/4" OD, Brass/Polybutylene Push-to-Connect Union Tee 145 Max psi
AVANTOR MASTERFLEX (VWR LLC) MASTERFLEX FITTING, PVDF, STRA
Masterflex Fitting, PVDF, Straight, Sanitary Clamp to Hose Barb Adapter, Mini Tri-Clamp¿ x 1/2" ID; 6/PK
MSC Honeywell North Coupler Assembly, Hansen Style, 3/8 in ID Hose, CF2000 Series
This coupler assembly features one male and one female quick-disconnect coupler, designed for secure and efficient connection of breathing tubes to 3/8 inch ID hoses. It is specifically compatible with CF2000 Series for use with supplied air respirators.
- Assembly with one male and one female coupler
- Connects breathing tube to 3/8 inch ID hose
- Compatible with CF2000 series
- 2 inch length
- Hansen style quick-disconnect
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, One Piece, 1/16", PEEK, Natural, Large Combihead with 10-32 Screw Threads. Finger or wrench Tighten, 1 EA.
These all PEEK "Male Nuts" are used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems. This Combihead Fitting has a partially knurled, rounded head for hand tightening and a "Flat" section of the head for using a wrench for a final quarter turn or to loosen the nut when it is tightly screwed into the fitting. This fitting has 12mm head, 22mm total length (top to bottom) with an 8mm thread length. The beveled inlet hole helps to make threading the tubing through the fitting easier. Color coded to help identify different users or columns while on an instrument.
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, One Piece, 1/16", PEEK, Natural, Large Head with 10-32 Screw Threads. Finger Tighten, 1 EA.
This is one of our , "Male Nuts" used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems. Fitting has a 12mm diameter knurled head, 21mm total length (top to bottom) with a 13mm thread length. The large head makes it easier to produce the torque needed to achieve a good swaged, connection.
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, One Piece, 1/16", PEEK, Natural, Small Hex Head, Long Length and 10-32 Screw Threads. Wrench Tighten, 10/PK.
This "Male Nut" is used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems. This Fitting has a 7mm diameter hexagonal head for use with a wrench to tighten or loosen the nut. The smaller, 7mm diameter head allows this fitting to be used inside instruments when space is limited. The 20mm total length (top to bottom) with a 15mm thread length allows for a an excellent, swaged connection that is similar in use to a Stainless Steel nut.
Chemglass Life Sciences Chemglass Adapter, Distillation, Bent - 45/50 Inner Joint to 65/40 O-Ring Ball Joint; for diagonal distillation cart systems (30/50 L reactors)
Adapter used to connect a 45/50 inner ground joint to a 65/40 O-ring ball joint in distillation assemblies. It features a bent geometry to route vapor and provide a sealed transition for diagonal distillation cart systems and distillation kits used with 30 and 50 L process reactors.
- Bent geometry routes vapor between mismatched joint types.
- Connects a 45/50 inner ground joint to a 65/40 O-ring ball joint.
- Designed for use in diagonal distillation cart systems and distillation kits for 30 and 50 L process reactors.
- Manufactured glassware construction suitable for laboratory distillation assemblies.
- Facilitates sealed transition and alignment in reactor distillation setups.
Foxx Life Sciences EZBio Ultra Minipure Sterilizing Grade Capsule Filter, 0.2µm Pore Size, Double-Layer PTFE, 2.31 ft² EFA, 1" Sanitary Inlet/Outlet, 4" Height, Silicone O Ring, Autoclavable, Non Sterile, 4/CS
EZBio Ultra Capsule filters provide superior sterile air and vent gas applications. Featuring a double-layer hydrophobic PTFE membrane and advanced pleat construction, they ensure high gas throughput and microbial retention in demanding environments. Available from 2” to 40” with hose barb, female NPT, or sanitary connections, they integrate seamlessly into biopharma, food & beverage, and high-purity air applications
Features
100% retention of B. diminuta 10^7 CFU/cm² per ASTM F838
Complies with USP Class VI (121°C) and 21 CFR Part 177
Optimized pleat geometry and open-area support layers provide outstanding airflow at minimal differential pressure
Autoclavable 20 times for 60 minutes at 257°F, 53 psi
Maximum Pressure
Forward
75 psid (5.1 bar) @ 75°F; 40 psid (2.8 bar) @ 180°F
Reverse
50 psid (3.4 bar) @ 75°F
Applications
Air & Gas Filtration
Sterile Venting
Bioreactor Vent Filters
Off-gas filtration
Foxx Life Sciences CPC AseptiQuik G HT Connector, 1/2" Hose Barb Genderless, Polycarbonate (PC), Class VI, AQG17008HT, 25/PK
Aseptiquik G Connectors provide quick and easy sterile connections, even in non-sterile environments—a critical capability for biopharmaceutical manufacturers. Featuring an easy to use three-step design and a wide range of options—including 1/8- to 1 1/2-inch size and genderless connections—the AseptiQuik family allows you to transfer media easily with less risk of error. Their robust, reliable performance eliminates the need for clamps, fixtures, or tube welders, giving you sterile, high-quality single-use connections every time.