Tubing Connectors and Fittings
Chemglass Life Sciences S-40 Ball Joint, Compatible with Buchi Rotary Evaporators, Tube OD: 34mm
Special S-40 size ball joint compatible with Buchi rotary evaporator components. Both the ball and socket are tooled on Duran 34 mm O.D. x 2.8mm wall tubing.
Chemglass Life Sciences Flange, Compatible with Buchi Rotary Evaporators, Flange OD: 50mm, Flange ID: 34.3mm, Shank OD: 38.1mm
Replacement flange compatible with Buchi condensers and rotary evaporator flasks. Flange OD: 50mm, Flange ID: 34.3mm, Shank OD: 38.1mm.
Bellco Glass, Inc. Freeze-Dry Ampoule,2mL Constriction on neck
Type 1 class a Borosilicate glass for freeze drying or cryogenic storage. The neck has pre-drawn constriction to facilitate sealing.. MADE IN THE USA Flat bottom Constriction neck Neck od: 9mm Bottom od: 12mm Capacity: 2ml Length: 145mm
Chemglass Life Sciences Adapter, PTFE, Universal, Inlet, 14/20 Inner Joint
Adapter, PTFE, Universal, Inlet, 14/20 Inner Joint. Unique adapter is made entirely of PTFE and is supplied complete with a series of 5 all PTFE ferrule style cones. These cones have inside diameters that run from 3.5 to 6.5mm and seal against the inserted tube by means of a threaded compression screw. Cones are color coded for easy identification. Replacement PTFE cones are available in sets of 5 or individually.
Chemglass Life Sciences Adapter, PTFE, Thermometer, Inlet, 14/20 Inner Joint, Use with Joint Sizes 14/20-14/35
Adapter, PTFE, Thermometer, Inlet, 14/20 Inner Joint, Use with Joint Sizes 14/20-14/35. Made entirely of PTFE, adapter has an inner joint of the listed size. The compression nut allows for vertical adjustment of thermometers or bleed tubes having an O.D. between 6 and 7mm. Supplied complete with one #108 Viton o-ring.
Chemglass Life Sciences Adapter, PTFE, Universal, Inlet, 29/42 Inner Joint
Adapter, PTFE, Universal, Inlet, 29/42 Inner Joint. Unique adapter is made entirely of PTFE and is supplied complete with a series of 5 all PTFE ferrule style cones. These cones have inside diameters that run from 3.5 to 6.5mm and seal against the inserted tube by means of a threaded compression screw. Cones are color coded for easy identification. Replacement PTFE cones are available in sets of 5 or individually.
Chemglass Life Sciences 24/40 Outer Joint, 16in OAL, on 28mm OD x 2mm W tubing
24/40 Outer Joint, 16in OAL, on 28mm OD x 2mm W tubing. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105. These joints offer the glassblower the opportunity to construct apparatus made of heavier tubing or without unnecessary seals.
Chemglass Life Sciences Adapter, Universal, Inlet, 24/40 Inner Joint, #15 Chem-Thread
Adapter, Universal, Inlet, 24/40 Inner Joint, #15 Chem-Thread. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D. such as thermometer wells, gas dispersion tubes, plain stem funnels, etc. Adapters are supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences 24/40 Inner Joint, Full Length, on 22mm OD x 1.8mm W tubing
24/40 Inner Joint, Full Length, on 22mm OD x 1.8mm W tubing. Standard Taper ground Inner Joint, Full Length.
Chemglass Life Sciences 50/50 Inner Joint, Full Length, on 48mm OD x 2mm W tubing
Standard taper ground inner joint, full length. 50/50 Inner Joint, Full Length, on 48mm OD x 2mm W tubing.
Chemglass Life Sciences Adapter, Connecting, 45/50 Top Outer, 29/42 Lower Inner, Enlarging
Adapter, Connecting, 45/50 Top Outer, 29/42 Lower Inner, Enlarging. Used to connect dissimilar standard taper joint sizes. Lower inner joint is smaller in size than the top outer joint.
Chemglass Life Sciences Purple replacement PTFE cones, Accepts 6.5mm I.D.
Purple replacement PTFE cones for the CG1047 series. Accepts 6.5mm I.D.
Chemglass Life Sciences Adapter, PTFE, Thermometer, Inlet, 19/22 Inner Joint, Use with Joint Sizes 19/22-19/38
Adapter, PTFE, Thermometer, Inlet, 19/22 Inner Joint, Use with Joint Sizes 19/22-19/38. Made entirely of PTFE, adapter has an inner joint of the listed size. The compression nut allows for vertical adjustment of thermometers or bleed tubes having an O.D. between 6 and 7mm. Supplied complete with one #108 Viton o-ring.