Manual Chromatography Systems
Perkin Elmer US LLC DuraMist Nebulizer 1.0 mL/min for ICP-OES
Air Flow Rate: 0.7 L/min The DuraMist is made from PEEK and can tolerate a wide variety of solvents including HF* High sensitivity and excellent precision due to concentric design and rigid construction High tolerance to dissolved solids (typically up to 30%) due to smooth surface of capillary and nebulizer tip
Perkin Elmer US LLC MicroMist Nebulizer, 0.2 mL/min for NexION 1000/2000
All NexION 1000/2000 MicroMist Nebulizers include a Gas Fitting with ratchet connector (N8151079).
Perkin Elmer US LLC Stainless Steel Nebulizer End Cap Assembly with Kalrez O-Rings for PinAAcle
This end cap assembly is included in the Organics Stainless Steel Nebulizer Complete Assembly for PinAAcle (N3160188). Note: This end cap ships as standard equipment on instruments configured with a stainless steel nebulizer.
Perkin Elmer US LLC SeaSpray DC Nebulizer, 0.4 mL/min
The SeaSpray nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization efficiency for trace level analyses. It also includes the Connector U-Series 1.3 mm O.D. x 0.50 mm I.D. (N0777513). Argon Flow Rate: 0.7 L/min Uptake Rate: 0.4 mL/min Material: Glass
Perkin Elmer US LLC Probe for ST Nebulizers, 0.50 mm I.D.
PTFE Sampling Probe Assembly with Carbon Fiber Support and Female Fitting, 0.50 mm ID for ICP-MS. Requires but does not include N8145017. Aspiration Rate: 400 µL/min Length: 100 cm
Perkin Elmer US LLC SeaSpray DC Nebulizer, 1.0 mL/min
The SeaSpray nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization efficiency for trace level analyses. It also includes the Connector U-Series 1.3 mm O.D. x 0.50 mm I.D. (N0777513). Argon Flow Rate: 0.7 L/min Uptake Rate: 1.0 mL/min Material: Glass
Perkin Elmer US LLC Nebulizer, End Cap and Burner Kalrez O-Ring Kit, PinAAcle AA Plastic Nebulizer
Nebulizer, End Cap and Burner Head Kalrez O-Ring Kit for High-Sensitivity Plastic Nebulizer used with PinAAcle AA flame instruments. The kit contents are listed below. 09200272 Qty 1 09200275 Qty 4 09200276 Qty 2 09200277 Qty 1 09200278 Qty 1 09200369 Qty 2
Perkin Elmer US LLC PFA-ST3 MicroFlow Nebulizer for ELAN and NexION 300/350
This PFA-ST3 nebulizer, with external threaded connector, is a high performance, clog resistant and chemically inert nebulizer for ICP-MS applications. It has an exchangeable external sample uptake capillary where the sample uptake rate is controlled by the diameter of the external capillary or probe.
Perkin Elmer US LLC Glass Cinnabar Spray Chamber with Helix for Optima 2x00/4x00/5x00/7x00 DV/8x00
The Cinnabar spray chamber is a mini-cyclonic spray chamber which gives good sensitivity at very low uptakes. The Cinnabar's design and low volume is ideal for the reduction of memory and matrix effects and very fast washout. It does not include an internal baffle and is not hydrofluoric acid-resistant. Precision is considered very good and purity is considered good. Material: Borosilicate glass Volume: 20 mL Physical reproducibility 1% Matrix effects 5 times lower than with coaxial chambers Low RSD's due to highly accurate construction Positive stop for reproducible nebulizer insertion Application uptake range 20 to 400 µL/min
Perkin Elmer US LLC PFA 47 mm M-200 Spray Chamber for Avio 200/500
Constructed entirely from chemically inert PFA, the PureChamber is available in low flow format for maximum aerosol transport and high flow format, ideal for ICP-OES applications. The PureCap accepts any 6 mm nebulizer but is ideally suited for the PFA MicroFlow nebulizer providing an O-Ring free PFA sample introduction system. The PFA 47 mm M-200 Spray Chamber with Gas Port (N0791848) is available separately.
Optimize Technologies Deuterium DoubleLife Lamp, Jasco 870, 875
Optimize offers a broad selection of lamps for OEM HPLC detectors. The high quality standard lamps come with a guaranteed 1,000 hour lifetime. We also offer our DX2 DoubleLife» Lamps. These long-life lamps are made using only top quality components and come with a 2,000 hour lifetime guarantee.
Optimize Technologies Deuterium DoubleLife Lamp, Varian Prostar 325, 335
Optimize offers a broad selection of lamps for OEM HPLC detectors. The high quality standard lamps come with a guaranteed 1,000 hour lifetime. We also offer our DX2 DoubleLife» Lamps. These long-life lamps are made using only top quality components and come with a 2,000 hour lifetime guarantee. This item is designed to work with Varian Prostar 325 and 335 pump models.
Waters Corp HPLC with UV Standards Kit
Alliance HPLC with UV Detector standards kit for system assessment.10 Ampules (10ml standard solutions contain):- Solution 1 Qty 1 0.030 mg/mL Uracil +/- 1% with 0.0100 mg/mL Caffeine +/- 0.5%- Solution 2 Qty 1 0.030 mg/mL Uracil +/- 1% with 0.0350 mg/mL Caffeine +/- 0.5%- Solution 3 Qty 2 0.030 mg/mL Uracil +/- 1% with 0.0600 mg/mL Caffeine +/- 0.5%- Solution 4 Qty 1 0.030 mg/mL Uracil +/- 1% with 0.1400 mg/mL Caffeine +/- 0.5%- Solution 5 Qty 1 0.030 mg/mL Uracil +/- 1% with 0.2200 mg/mL Caffeine +/- 0.5%- Solution 6 Qty 1 0.010 mg/mL Uracil +/- 1%- Solution 7 Qty 1 0.40 ug/mL Caffeine +/- 0.5%- Solution 8 Qty 1 4.00 mg/mL Caffeine +/- 0.5%- Solution 9 Qty 1 Blank (mobile phase only)Caffeine and Uracil > 99%All standards are in 30% HPLC Grade Methanol and 70% 18M ASTM Type 1 Lab Water, V/VCertificate of Analysis
Waters Corp 2695D 8 Needle Performance Maintenance Kit
The Waters Performance Maintenance Kit for the 2695D Transfer Module contains all the Waters Quality Parts necessary to keep your Dissolution Transfer Module operating at peak performance on an annual basis. The Waters Performance Maintenance Kit includes the following parts: one Tube kit, one 8-pack fitting, one EDPM O-ring, eight 2695D dispenser needles, eight 2.5mL syringes, and one 50-pack acrodisc filters. The 2695 PM Kit (p/n WAT270944) is also recommended to keep the separations module working at its peak performance.