Chromatography Tubing
Trajan Scientific LNR INL TQCE 2MMD TRC PTV 5/PK
Trajan Thermo Scientific Trace and Focus GC Liners, Diameter Inner: 1.75 mm, Diameter Outer: 2.75 mm, Length: 120 mm, For Use With: Thermo Scientific Trace and Focus GCs, GC Inlet Liner, PTV Liner, Quantity: 5/Pk.
Waters Corporation Tubing, PTFE, 1/16 in. OD, 0.015 in. ID, 1 m
This tubing is made from PTFE and is designed for laboratory applications. It features precise dimensions for reliable performance.
- Made from PTFE material.
- Outer diameter of 1/16 in.
- Inner diameter of 0.015 in.
- Length of 1 m.
Optimize Technologies 1/16" OD x .030" ID x 10ft PEEK Tubing
Optimize's PEEK tubing is biocompatible and chemically inert to most commonly-used solvents and can withstand pressures up to 6,000 psi. It remains a great alternative to stainless steel tubing for high pressure applications, withstands continuous use at HPLC pressure without swelling or bursting, its not affected by aggressive mobile phases and will not corrode. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Trajan Scientific Tubing PEEKSil Green Medical 2/PK
1/32 OD x 0 125 mm ID x 300 mm length PEEKsil tubing green PK2
Trajan Scientific Tubing PEEKSil Orange Medical 2/PK
360 m OD x 0 025 mm ID x 500 mm length PEEKsil tubing orange PK2
Bellco Glass, Inc. Stainless Steel Sparge Assembly w/Frit, 3/8 For 7L Bioreactor System
316l stainless steel sparger assembly with stainless steel frit for 7 liter bioreactor system. MADE IN THE USA English threadsMaterial: 316l SST with electropolish finish ra 32 or betterTubing specifications: .250" od x .152" id Overall length: 10 43/64" Inseration Length: 9 1/4" With SST Frit - 10µ Supply with SST Nut & O-ring
Trajan Scientific PEEK Tubing, Natural PEEK Tubing - 1/16" OD x .055" ID x 100FT, 800 PSI
PEEK Tubing, Natural PEEK Tubing - 1/16" OD x .055" ID x 100FT, 800 PSI. PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel. The polymer surface will not leach metal ions into the eluent or extract metal-sensitive components from the sample. Note however that dichloromethane, THF, and DMSO may cause swelling in PEEK, and concentrated nitric and sulphuric acid will attack PEEK.
Trajan Scientific Tubing PEEKSil Red Medical 2/PK
1/32 OD x 0 1 mm ID x 750 mm length PEEKsil tubing red PK2
Trajan Scientific Tubing PEEKSil Orange Medical 2/PK
1/16 OD x 0 025 mm ID x 600 mm length PEEKsil tubing orange PK2
Thermo Scientific Advanced nanoViper Fingertight Fitting Systems 50 μm | | 1 EA
Ensure optimal separations and maximize your liquid chromatography LC instrument performance with virtually zero-dead-volume connections. Advanced capillaries extend the use case based on application requirements.
Trajan Scientific Tubing PEEK Natural Medical 1/EA
1/32 OD x 0 0025 ID x 100 length PEEK tubing natural
Perkin Elmer US LLC 4 mm, Ultra Deactivated Single Taper Splitless Liner
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.
Thermo Scientific PEEK Tubing 1 ft
One foot length high temperature polyether ether ketone thermoplastic tubing for use in chemical and industrial applications requiring durability, temperature and chemical resistance.