Chromatography Tubing
Trajan Scientific Tubing PEEKSil Beige Medical 2/PK
1/16 OD x 0 05 mm ID x 650 mm length PEEKsil tubing beige PK2
Trajan Scientific Tubing PEEKSil Red Medical 2/PK
1/16 OD x 0 1 mm ID x 100 mm length PEEKsil tubing red PK2
Trajan Scientific Tubing PEEKSil Black Medical 2/PK
1/32 OD x 0 075 mm ID x 100 mm length PEEKsil tubing black PK2
Analytical Sales & Services FlexChrom Double Flexible UHPLC Assembly – 30cm x 0.007" ID
FlexChrom, Double 1/16 in. Flexible UHPLC Assembly, 30cm x 0.007 in. ID (Ends of Tubing are 1/16 in., Body is Ground down to 1/32 in. to Allow Flexibility)
Hach Company Tubing, Tygon, E-3603, 3.2 mm (I.D.)
Chemical-resistant, Formula E-3603 Tygon tubing with flex strength greater than rubber. Unaffected by oxidizing agents and compatible with virtually any laboratory chemical. Bends readily to sharp radius curves and will maintain strong grip on glass or metal. Highly polished bore prevents interior build-up while facilitating cleaning.
Trajan Scientific PEEK Tubing, Natural PEEK Tubing - 360 µm OD x .006" ID x 100FT, 3500 PSI
PEEK Tubing, Natural PEEK Tubing - 360 µm OD x .006" ID x 100FT, 3500 PSI. PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel. The polymer surface will not leach metal ions into the eluent or extract metal-sensitive components from the sample. Note however that dichloromethane, THF, and DMSO may cause swelling in PEEK, and concentrated nitric and sulphuric acid will attack PEEK.
Shimadzu Scientific Instruments MarvelXACT Stainless Steel 125um ID X 600mm Tubing w/Fittings
MarvelXACT is comprised of flexible 1/32" OD stainless steel tubing for easy routing through the LC system and can be connected and disconnected multiple times. The 1/16" tubing ends and integrated fittings are compatible with any 10-32 coned port, and are finger-tight — no tool required for UHPLC connections up to 19,000 psi. The fitting produces a haptic "click" feedback when it reaches the optimum torque to eliminate the risk of under- or over-tightening. The PEEK tubing end seals at the port bottom which eliminates dead volume and minimizes carryover risk, peak tailing, and peak broadening. Tubing volume: 7.363uL.
Perkin Elmer US LLC Stainless Steel ATD Prepacked Sample Tubes, Sorbent: Tenax™ TA60/80 Pkg 10
The Tenax TA is conditioned at 320 °C. PerkinElmer recommends a maximum temperature of 350 °C for this sample tube with a desorption temperature of 300 °C. The tubes approximate analyte volatility range is n-C7 to n-C26 and the typical analytes for the Tenax TA are aromatics except benzene, apolar compounds (BP>100 °C) and less volatile compounds.
IDEX Health & Science Upchurch IDEX HEALTH & SCIENCE UPCHURCH
NC4012052 TUBING OD 1/16 INCH MATERIAL G