Chromatography Tubing
Waters Corporation Tubing Assembly, Inject Out to HPLC Column, 0.005 x 11 in. long, HPLC fitting
Waters Corporation Tubing Assembly, Inject Out to HPLC Column, 0.005 x 11 in. long, HPLC fitting
Waters Corporation Tubing, Fused Silica Capillary, 375μm OD, 75μm ID, 10 m
Waters Corporation Tubing, Fused Silica Capillary, 375μm OD, 75μm ID, 10 m
Waters Corporation Tubing, FEP, 12 mm OD, 1 m Length
This tubing is a replacement 1 m piece of FEP tubing with a 12 mm outer diameter. It is commonly used for waste drainage in Mass Spectrometers and other various laboratory locations.
- Made from FEP material
- Features a 1 m length
- Has a 12 mm outer diameter
- Suitable for waste drainage in mass spectrometers
Waters Corporation Tubing, TYGON, 3/16 in OD, 1/16 in ID, 25 in
This tubing is made from TYGON material, designed for various laboratory applications. It features precise dimensions for reliable fluid transfer and is provided in a convenient 25 in. length.
- Material: TYGON
- Outer diameter: 3/16 in.
- Inner diameter: 1/16 in.
- Length: 25 in.
Waters Corp Waters HPLC Tubing, Stainless Steel, .005 in ID, 24 in Long
This HPLC inlet tubing is a stainless steel assembly specifically designed for use with the ACQUITY 30cm Column Heater/Cooler. With an internal diameter of .005 in and a length of 24 in, this tubing connects the column to inject valve port 6 and is essential for performing AQT testing.
- Made from stainless steel for durability and chemical resistance.
- Specifically designed as an inlet tube for ACQUITY 30cm Column Heater/Cooler.
- Essential for performing AQT testing.
- Connects the column to the inject valve port 6.
- Ideal for high-performance liquid chromatography applications.
Waters Corp Waters Tubing, Column Outlet, PEEK, 0.0025 in
This tan-colored column outlet tubing has an inner diameter of 0.0025 in. It is designed as a spare part for various applications and is supplied as one unit per package.
- Tan-colored column outlet tubing.
- Inner diameter of 0.0025 in.
- Packaged as 1 unit per package.
- Replacement schedule is as required.
Optimize Technologies 1/16" OD x .010" ID x 6cm Stainless Steel Tubing
Optimize's stainless steel tubing is pre-cut, micro polished, seamless, guarantees square/burr-free ends, and is passivated prior to shipment. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Optimize Technologies .100" OD x .040" ID x 10ft PTFE Tubing, Natural
Optimize's PTFE tubing is chemically inert to most solvents, easy to cut, translucent for easy monitoring and recommended for general low pressure applications. The tubing is also available in various OD and ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Optimize Technologies 1/16" OD x .010" ID x 50ft PEEK Tubing
Optimize's PEEK tubing is biocompatible and chemically inert to most commonly-used solvents and can withstand pressures up to 6,000 psi. It remains a great alternative to stainless steel tubing for high pressure applications, withstands continuous use at HPLC pressure without swelling or bursting, its not affected by aggressive mobile phases and will not corrode. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
