Chromatography Tubing
Trajan Scientific Tubing PEEKSil Purple Medical 2/PK
1/32 OD x 0 15 mm ID x 400 mm length PEEKsil tubing purple PK2
Biotium Primary Antibody DNP rLO-DNP-2 CF740 1/EA
DNP (rLO-DNP-2) is a recombinant rat monoclonal antibody that recognizes the dinitrophenol (DNP) hapten This CF740 antibody conjugate has been validated in Immunofluorescence CF and reg dyes are Biotiums line of next-generation fluorescent dyes with advantages in brightness and photostability
Trajan Scientific Tubing PEEKSil Red Medical 2/PK
1/32 OD x 0 1 mm ID x 500 mm length PEEKsil tubing red PK2
Trajan Scientific Tubing PEEKSil Purple Medical 2/PK
1/16 OD x 0 15 mm ID x 100 mm length PEEKsil tubing purple PK2
Microsolv Technology Corporation Tubing, PTFE, 0.030" ID, 1/16" OD, Low Pressure, Green. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm. Color: Green. ID: 0.030" ( 0.75mm ). Pressure rating: 510 psi.
Waters Corporation Tubing, PTFE, 0.062 in. × 0.01 in. × 0.75 in., 5/pk
This PTFE tubing is designed for various laboratory applications. It features precise dimensions and comes in a convenient pack of five.
- Made from PTFE for chemical inertness and high temperature resistance
- Outer diameter of 0.062 in.
- Inner diameter of 0.01 in.
- Length of 0.75 in.
- Supplied in a pack of five
- Suitable as a spare part for various systems
Waters Corp Waters Tubing Assembly, Solvent Inlet, 1/4 in, 4 per Pack
This product is a tubing assembly designed for solvent inlets, provided in a pack of four. It is categorized under service parts and kits, offering essential components for maintaining laboratory systems.
- Tubing assembly for solvent inlets
- 1/4 in diameter
- Comes in a pack of four
- Product support options include user manuals, troubleshooting assistance, and safety data sheet downloads
Trajan Scientific Tubing PEEKSil Green Medical 2/PK
1/32 OD x 0 125 mm ID x 600 mm length PEEKsil tubing green PK2
Optimize Technologies 1/16" OD x .020" ID x 10cm Stainless Steel Tubing
Optimize's stainless steel tubing is pre-cut, micro polished, seamless, guarantees square/burr-free ends, and is passivated prior to shipment. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Perkin Elmer US LLC 2 mm, Ultra Deactivated Straight Splitless Liner with Wool
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.