Chromatography Tubing
IDEX Health & Science Upchurch IDEX HEALTH & SCIENCE UPCHURCH
NC4045503 TUB PEEK YEL 1/32 X .007 X 5FT
Optimize Technologies 1/16" OD x .030" ID x 10ft PTFE Tubing, Natural
Optimize's PTFE tubing is chemically inert to most solvents, easy to cut, translucent for easy monitoring and recommended for general low pressure applications. The tubing is also available in various OD and ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Analytical Sales & Services SS Tubing 1/16" OD - 0.02" ID x 5', Yellow
This item has a minimum order quantity of 2 per supplier requirements. SS TUBING .020 X 5 YELLOW
Waters Corp Tubing, 1/16 in (1.6mm) O.D. X 0.015 in (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Waters tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.
Waters Corporation Tubing Assembly, Fused Silica, Inject Valve to Trap Valve, nanoACQUITY UPLC
This tubing assembly is designed for use with the nanoACQUITY UPLC system in 2D analysis setups. It facilitates the connection between the injection valve and the trap valve, serving as an essential component within the online 2D-LC/MS Kit tubing assemblies.
- Configures the nanoACQUITY UPLC system for 2D analysis.
- Connects the injection valve to the trap valve.
- Features fused silica tubing construction.
- Equipped with a V-detail fitting at one end.
- Assembled with a green PTFE sleeve and black plastic fitting into a SCX column.
- V-detail end connects to port 4 of the HTM valve.
Microsolv Technology Corporation Tubing Holder, Clamp, for 1/8" or 1/16" OD Tubing. Blue. 10/PK.
This Tubing Holder will hold 1/16" or 1/8" OD Tubing in place on a beaker, bottle or any thin walled vessel. The spring loaded holder is excellent while draining or siphoning or filling with tubing. Equipped with 2 holes, one hole accommodates 1/16" and the other accommodates 1/8" tubing.
Trajan Scientific PEEK Tubing, Striped Color Coded PEEK Tubing (Grey) - 1/16" OD x .040" ID x 100FT, 2600 PSI, 179 BAR
PEEK Tubing, Striped Color Coded PEEK Tubing (Grey) - 1/16" OD x .040" ID x 100FT, 2600 PSI, 179 BAR. PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel. The polymer surface will not leach metal ions into the eluent or extract metal-sensitive components from the sample. Note however that dichloromethane, THF, and DMSO may cause swelling in PEEK, and concentrated nitric and sulphuric acid will attack PEEK.