TLC Plates
Macherey-Nagel TLC polyerster sheets POLYGRAM SIL G UV254, 5x20 cm
POLYGRAM sheets SIL G/UV254 - size: 5 x 20 cm - pack of 50
Macherey-Nagel TLC/HPTLC aluminum sheets ALUGRAM RP-18W/UV254, 5x10 cm
ALUGRAM sheets RP-18W/UV254 - size: 5x10 cm - pack of 50
Sorbent Technologies Inc Silica G Prep TLC Plates, w/UV254, glass backed, 20x20cm, 2000um, 12/pk
"Silica G" is a standard grade, unmodified Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-50um. The plates contain UV254 fluorescent indicator. This preparative soft layer is bound to a glass support. It has a thickness of 2000um and dimensions of 20x20cm. There are 12 plates per pack.
Macherey-Nagel TLC glass plates SIL G-25, 20x20 cm
TLC precoated plates SIL G-25 - size: 20x20 cm - pack of 25
Miles Scientific SILICA GEL G 2000UM 20X20CM (25 PLATES/BOX)
Preparative TLC plates have adsorbent layers thicker than the 250 micron layers normally used for analytical separations. Thus, preparative plates can be used for separation of larger quantities of materials. The loading capacity for a given degree of sample component resolution increases roughly as the square root of the increased adsorbent layer thickness. In preparative TLC, materials to be separated are often applied as long streaks rather than spots. After development, specific compounds may be recovered by scraping the adsorbent layers from the plate in the region of interest and eluting the separated material from the adsorbent using a strong solvent. Thicker layers for higher capacity -Full range of plate sizes ·Prep-scored option for convenient zone location - Available with preadsorbent sample loading zone - Calcium sulfate binder-soft later for easy scraping
Macherey-Nagel TLC GLASS PLATES 20X20CM, 25PC
TLC glass plates, silica gel layer, SIL G-25 HR, 20x20 cm
Cole-Parmer Analtech 02511 Uniplates, 20x20cm/UV/Scored/Soft/Silica G/250um Thick/15um Part; 25/Pk
These TLC plates combine top-quality adsorbents, consistent manufacturing, rigid QC, and careful packaging--the results of 40 years of experience dedicated to thin layer techniques. Select the perfect analytical plates for your application. Choose plates with or without an acid stable fluorescent indicator (UV 254 nm). Scored plates snap apart evenly to facilitate single-use separations or screening.
MILES SCIENTIFIC CORPORATION SILCAGEL GF 1500UM 20X20 25/PK
NC1782729 SILCAGEL GF 1500UM 20X20 25/PK
Sorbent Technologies Inc Resolv-Rf™ Silica Hard Layer TLC Plates, w/UV254, glass backed, 250um, 5x20cm, 100/pk
Resolv-Rf™ Silica Hard Layer (HL) TLC Plates are made with standard grade Silica 60, which has a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical hard layer is bound to a glass support. It has a thickness of 250um and dimensions of 5x20cm. There are 100 plates per pack. Resolv-Rf™ TLC Plates are suitable for all common separations. The layer has a hardness that is abrasion resistant and can be easily labeled with a lead pencil for clear identification. The dense coating yields narrow bands for a high separation efficiency. Applications include: drug synthesis compounds, identity of drugs, food and environmental samples, quality control testing of pharmaceuticals, etc. Made in the U.S.A.
Macherey-Nagel TLC POLYESTER SHEET 5X20 PK/50
TLC polyester sheets with polyamide 6 (PA6, ε-polycaprolactame). 5x20 cm, 0.1 mm thickness
Sigma Aldrich Fine Chemicals Biosciences HPTLC calibration mix in m
HPTLC HPTLC calibration mix in m
Sigma Organic Chemistry Pam3-Cys-OH | 250MG | 87420-41-5 | MFCD00153468 | >=98.0% (TLC)
Pam3-Cys-OH | 250MG | 87420-41-5 | MFCD00153468 | >=98.0% (TLC)