Chromatography Columns and Cartridges
YMC America, Inc BioPro QF PEEK 3um 150x4.6mm
YMC-BioPro products are made with a hydrophilic polymer base particle and are used for the separation of biomolecules This column family delivers reliable high-resolution separations from analytical to preparative scale YMC-BioPro IEX columns are available with porous and non-porous particles for strong anion exchange (SAX) and strong cation exchange (SCX) The non-porous formats (QF SF) are highly efficient and are therefore ideal for high-throughput analytical separations requiring high resolution
YMC America, Inc ODS-AL 120A 5um 150x0.5mm 1/32
YMC-Pack ODS-AL is a non-endcapped high carbon load monomeric C18 phase It exhibits different selectivity from conventional ODS columns due to the use of not only hydrophobic interaction but also secondary interactions caused by silanol groups YMC-Pack ODS-AL is intended for use only in those situations where residual silanol activity is beneficial to the separation
YMC America, Inc PVA-Sil 120A 5um 100x.3mm 1/16
YMC-Pack PVA-Sil is prepared from a 5 m 120 silica support which is bonded with a monomolecular polymer coating of vinyl alcohol The polymerized PVA completely covers both external and internal surfaces of the silica support protecting it against aggressive high pH buffers and solvents
YMC America, Inc Triart C18 ExRS 80A 3um 20x4mm
YMC-Triart phases are based on organic/inorganic hybrid particles that combine the high mechanical stability and efficiency of a silica-based packing material with the robust chemical stability of a polymer-based packing material This versatile resin is produced using tightly controlled particle formation technology adapted from micro-reactor technology The resulting uniform particle and pore size distributions as well as the smooth surface greatly contribute to excellent peak shape and separation reproducibility In addition YMC-Triart materials are highly resilient and robust when used at extreme pH elevated temperature and high pressure
Waters Corp Viridis HSS C18 SB Column, 100Å, 3.5 µm, 3 mm X 150 mm, 1/pk
The Viridis sub-2-µm and 3.5 µm columns demonstrate high efficiency and resolution. The reduction and control of surface silanol activity on Viridis particles delivers, under SFC conditions, excellent peak shapes — without the use of mobile-phase additives — even for well-retained basic achiral compounds.
Waters Corp Viridis HSS C18 SB Column, 100Å, 1.8 µm, 3 mm X 100 mm, 1/pk
The Viridis sub-2-µm and 3.5 µm columns demonstrate high efficiency and resolution. The reduction and control of surface silanol activity on Viridis particles delivers, under SFC conditions, excellent peak shapes — without the use of mobile-phase additives — even for well-retained basic achiral compounds.
Waters Corp Waters UPLC Column, C18, 1.7 μm, 3 X 100 mm
This kit consists of three ACQUITY UPLC BEH Shield RP18 columns packed with three different batches of sorbent.
- Chemistry: C18
- Separation mode: Reversed phase
- Particle substrate: Hybrid
- pH range: 2 to 11
- Maximum pressure: 18000 psi (1240 Bar)
- Endcapped
- Bonding technology: Shield RP18
- Silanol activity: Low
- Particle shape: Spherical
- Particle size: 1.7 μm
- Endfitting type: Parker-style
- Pore size: 130 Å
- Format: Method Validation Kit
- Surface area: 185
- System: UPLC, UHPLC
- Particle technology: BEH
- USP classification: L1
- Inner diameter: 3 mm
- Length: 100 mm
- Carbon load: 17 %
- eCord enabled
- Units per package: 3 pk
Waters Corp WATERS CORPORATION ACQUITY UPLC BEH HILIC Method Validation Kit, 1.7 μm, 130 Å, 3.0 × 100 mm
This method validation kit contains columns designed to provide excellent peak asymmetry, efficiency, and chemical stability. These columns are designed to operate under extreme pH conditions, allowing for a wide pH range to influence the retention, selectivity, and sensitivity of ionizable compounds.
- Provides unprecedented levels of peak asymmetry, efficiency, and chemical stability.
- Suitable for both reversed-phase and HILIC applications, offering selectivity for many small-molecule compounds.
- Robustness to operate under extreme pH conditions (pH 1 to 9).
- Enables the use of a wide pH range for optimizing retention, selectivity, and sensitivity of ionizable compounds.
- Available in HPLC particle sizes.
- Each kit contains three columns from three different batches of material to ensure reproducibility and consistency.
Waters Corp WATERS CORPORATION XSelect Analytical Column, Phenyl-Hexyl, 3.0 x 75 mm, 3.5 μm
WATERS CORPORATION XSelect Analytical Column, Phenyl-Hexyl, 3.0 x 75 mm, 3.5 μm
Waters Corp Viridis BEH OBD Prep Column, 130Å, 5 μm, 19 mm × 50 mm
Designed and tested for SFC, the 5 μm columns demonstrate a wide range of selectivity for greater resolution. The reduction and control of surface silanol activity on Hybrid particles delivers, under SFC conditions, excellent peak shapes — without the use of mobile-phase additives — even for well-retained basic achiral compounds.
- Separation mode: SuperCritical Fluid (SFC)
- Particle substrate: Hybrid
- Maximum pressure: 6000 psi (415 bar)
- Endcapped: No
- Silanol activity: Medium
- Particle shape: Spherical
- Particle size: 5 μm
- Endfitting type: Waters
- Pore size: 130 Å
- Format: OBD Prep column
- Surface area: 185
- System: SFC preparative
- Particle technology: BEH
- Technique: SFC, SFC/MS
- Inner diameter: 19 mm
- Length: 50 mm
- Units per package: 1 pk
YMC America, Inc ProC4 120A 5um 5x0.5mm 1/32
YMC-Pack C4 is ideal for analyzing mixtures with a wide range of component polarity This is due to the C4 bonded phase exhibiting shorter analysis time while still maintaining high resolution when compared to longer-chain bonded chemistries YMC-Pack C4 (Butyl) columns are available with three pore sizes to accommodate optimum separations of virtually any molecular-weight compound The 120 phase is used extensively with non-polar peptides which are too strongly retained on C8 and C18 The 200 and 300 phase columns effectively resolve many classes of proteins and biopolymers The wide pore butyl chemistry allows minimal distortion of tertiary conformation for large biomolecules and results in samples that are pure concentrated and high in biological activity
YMC America, Inc Tri C8 120A 1.9um 5x.5mm 1/32
YMC-Triart phases are based on organic/inorganic hybrid particles that combine the high mechanical stability and efficiency of a silica-based packing material with the robust chemical stability of a polymer-based packing material This versatile resin is produced using tightly controlled particle formation technology adapted from micro-reactor technology The resulting uniform particle and pore size distributions as well as the smooth surface greatly contribute to excellent peak shape and separation reproducibility In addition YMC-Triart materials are highly resilient and robust when used at extreme pH elevated temperature and high pressure
YMC America, Inc Diol-NP guard 60A 5um 10x3mm
YMC-Pack Diol-NP is a versatile alternative to silica for normal phase separations and provides much better reproducibility when compared to bare silica material It shows typical normal phase retention behavior when used with low-polarity mobile phases due to hydroxyl groups on the surface of the stationary phase acting as polar groups YMC-Pack Diol-NP can also be used in HILIC-mode with organic/water mobile phases
