
Chemical Resistant Gloves
Gloves designed to resist a wide range of chemicals; available in butyl, neoprene, nitrile, PVC, natural rubber, fluoroelastomer, and specialty formulations, lined/unlined, smooth/textured finish; ambidextrous, available in variety of sizes and thicknesses. Regulatory compliance details can be obtained at the individual product level.
The U.S. Occupational Health and Safety Administration (OSHA) standards for personal protective equipment (PPE) address the need for chemical protective safety gloves. PPE is required when hands are exposed to possible skin absorption of harmful substances or chemical or thermal burns.
The OSHA standard also mandates an assessment of chemical exposure and the choice of appropriate gloves based on:
- Dexterity demands
- Length of exposure
- Chemical concentration, temperature, and combinations
- Simultaneous hazards
What Are Chemical Resistant Gloves Used for?
Use chemical resistant gloves for work in chemical plants, transportation, chemical processing, petrochemical and oil refining, de-greasing, solvents, hazardous liquids, and janitorial and maintenance work.
Chemical resistant glove materials and possible applications include:
- Butyl ‒ high-permeation resistance to gas and water vapors; use with esters and ketones
- Neoprene ‒ excellent tensile strength and heat resistance; compatible with some acids and caustics; moderate abrasion resistance
- Nitrile ‒ chemical and abrasion resistance; for general-duty gloves; protects against oils, greases, petroleum products, some acids, and caustics
- PVC (polyvinyl chloride) ‒ resists most acids, fats, petroleum hydrocarbons; abrasion resistant
- PVA™ material (polyvinyl alcohol) ‒ water-soluble; gas-impermeable; resists aromatic and chlorinated solvents
- Viton™ material ‒ resists chlorinated and aromatic solvents; flexible; minimally resists cuts or abrasions
What Are the Best Chemical Resistant Gloves?
No single glove meets the PPE needs for all chemical exposures. Use the manufacturer’s test results to help select the right gloves and check ratings.
Some chemical resistant gloves come lined with cotton for comfort and have other special features. In addition to hand protection, eye protection is important as well. Make sure your facility is equipped with chemical splash goggles, faceshields, eye protection safety signage, and other PPE.
- (149)
- (1)
- (1)
- (85)
- (5)
- (43)
- (1)
- (1)
- (1)
- (19)
- (3)
- (2)
- (87)
- (4)
- (2)
- (119)
- (2)
- (2)
- (127)
- (3)
- (2)
- (116)
- (91)
- (84)
- (9)
- (89)
- (16)
- (3)
- (120)
- (11)
- (2)
- (11)
- (203)
- (173)
- (6)
- (466)
- (4)
- (1)
- (2)
- (71)
- (5)
- (11)
- (4)
- (7)
- (25)
- (12)
- (1)
- (9)
- (7)
- (5)
- (298)
- (222)
- (2)
- (40)
- (302)
- (6)
- (20)
- (49)
- (8)
- (20)
- (20)
- (11)
- (22)
- (16)
- (75)
- (217)
- (736)
- (2)
- (1)
- (4)
- (69)
- (20)
- (23)
- (3)
- (36)
- (96)
- (20)
- (39)
- (66)
- (1)
- (11)
- (11)
- (38)
- (11)
- (6)
- (51)
- (4)
- (11)
- (8)
- (4)
- (4)
- (20)
- (4)
- (7)
- (4)
- (27)
- (6)
- (5)
- (5)
- (3)
- (5)
- (2)
- (6)
- (5)
- (1)
- (4)
- (4)
- (3)
- (4)
- (1)
- (5)
- (9)
- (5)
- (7)
- (6)
- (2)
- (4)
- (4)
- (6)
- (20)
- (5)
- (9)
- (1)
- (4)
- (4)
- (18)
- (9)
- (16)
- (1)
- (29)
- (18)
Filtered Search Results

Ansell AlphaTec™ 53-001 Nitrile Chemical Resistant Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Black gloves feature an innovative multi-layer polymer design to offer multi-barrier chemical protection.

Chlorinated | No |
---|---|
Grip Design | ANSELL GRIP™ Technology |
Length (Metric) | 35 cm |
EN 421 | No |
EN388 Standard | EN 388:3121A |
Color | Gray,Black |
Length (English) | 13 in. |
Material | Nitrile,Neoprene |
Thickness (Metric) | 0.38 mm |
Series | AlphaTec™ 53-001 |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 3 |
Certifications/Compliance (Europe) | EN 420:2003 + A1:2009, EN 1149, EN407 |
EN ISO 374-1 CHEMICAL LETTER CODES | ACFGJKLMNOPST |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 15 mil |
Latex Free | Yes |
Lining | Lined |
Liner Material | Nylon |
Glove Cuff Style | Gauntlet |
Ansell AlphaTec™ 38001PP Medium Duty Chemical-resistant Gloves with Gauntlet Cuff
AlphaTec™ 38001PP Medium Duty Chemical-resistant Gloves with Gauntlet Cuff are made of water-based butyl and boast a raised diamond grip for precise industrial applications.
Thickness (Metric) | 0.35 mm |
---|---|
Applications | Industrial |
Thickness (English) | 14 mil |
Color | Black |
Length (English) | 14 in. |
Latex Free | Yes |
Material | Butyl |
Glove Cuff Style | Gauntlet |
SW Sustainability Solutions PowerChem PC-95GR 6.2 mil Neoprene Exam Gloves
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Neoprene gloves provide resistance to chemicals, punctures, and abrasions with a secure grip for handling small parts and slippery objects.

Length (Metric) | 24.2 cm |
---|---|
EN 421 | No |
Applications | Healthcare,Laboratory |
Color | Green |
Length (English) | 9.5 in. |
Material | Neoprene |
Thickness (Metric) | 0.16 mm |
EN ISO 374-1 | Type C |
ANSI Abrasion Rating | ANSI 0 |
Certifications/Compliance (Europe) | EN ISO 21420:2020, EN 455-2000-2015, Reach EU 1907/2006, EU 2016/425 |
Thickness (English) | 6.2 mil |
Model | PC-95 GR |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | FDA 21 CFR 177.2600,ASTM D6977-19,ASTM F1671-13,ASTM F739-12 |
Glove Cuff Style | Beaded |
Honeywell™ North™ 14 mil Butyl Chemical Resistant Gloves
Unsupported butyl gloves are 14 in. in length with a curved finger and hand design to promote dexterity.
Thickness (Metric) | 0.35 mm |
---|---|
Certifications/Compliance (Europe) | EN 420 |
Length (Metric) | 35.5 cm |
EN388 Standard | EN 388 |
Thickness (English) | 14 mil |
Color | Black |
Length (English) | 14 in. |
Latex Free | Yes |
Lining | Unlined |
Material | Butyl |
Certifications/Compliance | ASTM D3389-05,ASTM F790-97,OSHA 29 CFR,MIL-DTL-43976D,EN 374 |
For Use With (Application) | Aircraft maintenance, automotive, chemical handling and processing, domestic preparedness, laboratory, hazmat |
Glove Cuff Style | Beaded/Rolled |
SHOWA™ Unlined 13 in. Chemical Resistance Nitrile Gloves, 15 mil
Unlined, 15 mil nitrile gloves protect against abrasion, puncture and snags. Ideal for resistance to a broad range of solvents, animal fats and other chemicals.

Chlorinated | No |
---|---|
Grip Design | Bisque |
Length (Metric) | 33 cm |
EN 421 | No |
EN388 Standard | EN 388:2016 2001X |
Color | Green |
Length (English) | 13 in. |
Material | Nitrile |
For Use With (Application) | Manufacturing, chemical processing, Petrochemicals, food processing, aerospace, automobile degreasing, automotive assembly, painting applications, machine applications using cutting Oils |
Thickness (Metric) | 0.38 mm |
Series | SHOWA™ 727 |
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | CE Cat III |
EN ISO 374-1 CHEMICAL LETTER CODES | JKLOPT |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 15 mil |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | FDA |
Glove Cuff Style | Straight |
Honeywell™ North™ 13 mil Butyl Chemical Resistant Gloves
Unsupported 13 mil thick butyl gloves with rolled beaded cuffs offer permeation resistance to gas and water vapor. Available in smooth finish or Grip-Saf™ palm for enhanced grip.
Grip Design | Grip-Saf™ |
---|---|
Length (Metric) | 27.9 cm |
EN388 Standard | EN 388 |
Color | Black |
Length (English) | 11 in. |
Material | Butyl |
For Use With (Application) | Aircraft maintenance, chemical handling and processing, domestic preparedness, laboratory and hazmat |
Hand | Specific |
Thickness (Metric) | 0.33 mm |
Certifications/Compliance (Europe) | EN 420 |
Thickness (English) | 13 mil |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | ASTM D3389-05,ASTM F790-97,OSHA 29 CFR,EN 374 |
Glove Cuff Style | Beaded/Rolled |
Ansell MICROFLEX™ NeoTouch™ 25-201 Neoprene Gloves, Extended Cuff
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Neoprene gloves with an extended cuff offers expanded chemical splash protection over the wrist and forearm.
Length (Metric) | 29 cm |
---|---|
Applications | Laboratory |
Finger Thickness (English) | 6.3 mil |
Color | Green |
Length (English) | 11.5 in. |
Material | Neoprene |
Powdered | Powder Free |
Finger Thickness (Metric) | 0.16 mm |
Thickness (Metric) | 0.16 mm |
Series | MICROFLEX™ NeoTouch™ 25-201 |
Certifications/Compliance (Europe) | EN 374-1:2016, EN 374-5:2016, EN 420:2003 + A1:2009 |
Thickness (English) | 6.3 mil |
Palm Thickness (English) | 5.1 mil |
Exterior Finish | Partially Textured |
Certifications/Compliance | ASTM D6977,FDA 21 CFR 177-2600 |
AQL | 1.5 |
Palm Thickness (Metric) | 0.13 mm |
SHOWA™ 890 Unlined Viton™ Chemical Resistant Butyl Gloves
Extra-thick 14 in. chemical resistant gloves provide resistance to highly corrosive acids. Butyl rubber coating is designed for handling aliphatic and aromatic hydrocarbons, such as Benzene, Toulene, and Xylene.
Grip Design | Smooth |
---|---|
Length (Metric) | 35.5 cm |
EN388 Standard | EN 388:1020X |
Color | Black |
Length (English) | 14 in. |
Material | Viton,Butyl |
Thickness (Metric) | 0.71 mm |
EN ISO 374-1 | Type B |
Certifications/Compliance (Europe) | Cat III CE 0299 |
EN ISO 374-1 CHEMICAL LETTER CODES | DFL |
Thickness (English) | 28 mil |
Latex Free | Yes |
Lining | Unlined |
Glove Cuff Style | Rolled |
MAPA™ Butoflex 650 Chemical Resistant Butyl Gloves, Fabric Inner Lining
Butyl gloves with fabric inner lining feature an embossed exterior finish for a secure grip on slippery objects. Ideal for chemical, mechanical and pharmaceutical applications.
Grip Design | Embossed |
---|---|
Length (Metric) | 35.5 cm |
EN388 Standard | EN 388:1121X |
Color | Black |
Length (English) | 14 in. |
Material | Butyl |
For Use With (Application) | Chemical gases and liquids, such as ketones, esters and amines |
Thickness (Metric) | 0.50 mm |
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | CAT 3, CE 0334 |
EN ISO 374-1 CHEMICAL LETTER CODES | ABCILMNOS |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 20 mil |
Latex Free | Yes |
Lining | Lined |
Certifications/Compliance | CE-0334 |
Liner Material | Fabric |
Glove Cuff Style | Scalloped |
Fisherbrand™ Green 15 mil Flock-Lined Chemical Resistant Nitrile Gloves
Excellent grip with wet and dry applications

Thickness (Metric) | 0.38 mm |
---|---|
Chlorinated | No |
Certifications/Compliance (Europe) | CE |
Length (Metric) | 33 cm |
Thickness (English) | 15 mil |
Color | Green |
Length (English) | 13 in. |
Latex Free | Yes |
Lining | Lined |
Material | Nitrile |
Certifications/Compliance | ISO 9001:2000,FDA 21 CFR 170-199,21 CFR 170-199,FDA |
For Use With (Application) | Light chemical applications, printing, meat and poultry processing |
Glove Cuff Style | Straight |
Ansell AlphaTec™ 58-201 Green Nitrile Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Utilizing a unique formulation, AlphaTec 58-201 is a truly versatile protective solution that can be applied to a wide range of applications and environments.

Grip Design | Ansell Grip™ Technology |
---|---|
ANSI Abrasion Rating | ANSI 5 |
Length (Metric) | 330 mm |
Color | Green |
Latex Free | Yes |
Material | Acrylic, Nitrile |
Certifications/Compliance | ANSI ABR 5, ANSI Cut A2, CE 0493, EN 388:2016 +A1:2018, EN 374:2003, EN 388:2003, EN407:2020 , EN 511:2006, Food Contact |
Liner Material | Acrylic |
Glove Cuff Style | Gauntlet |
Ansell Neox™ Supported Neoprene Gloves
Reinforced neoprene coating provides exceptional resistance to abrasion, cutting, and chemicals

Size | 10 |
---|---|
Latex Free | Yes |
Material | Neoprene |
Certifications/Compliance | 21 CFR 177-2600 |
Ansell AlphaTec™ 87-208 Orange Heavyweight Latex Gloves
Thick natural rubber latex gloves provide extra protection with heavy duty applications.

Chlorinated | Yes |
---|---|
Grip Design | Lozenge |
Length (Metric) | 33 cm |
EN 421 | No |
EN388 Standard | EN 388:X121, EN 388:X121X |
Color | Orange |
Length (English) | 13 in. |
Material | Latex |
For Use With (Application) | Chemical plants and transportation, chemical processing, handling acids, alkalies, salts and ketones |
Thickness (Metric) | 0.73 mm |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 3 |
Certifications/Compliance (Europe) | CE 0493, EN 420:2003 + A1:2009; Category III |
EN ISO 374-1 CHEMICAL LETTER CODES | AKLOPS |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 29 mil |
Latex Free | No |
Lining | Lined |
Certifications/Compliance | EN 374 AKL, EN 388 X121 |
Liner Material | Cotton Flock |
Glove Cuff Style | Pinked |
Ansell AlphaTec™ SOLVEX™ 37-175 Nitrile Chemical Resistant Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Durable, comfortable chemical resistant gloves offer versatile hand protection.

Chlorinated | Yes |
---|---|
Grip Design | Sandpatch |
Length (Metric) | 33 cm |
EN388 Standard | EN 388:4101X, EN 388:4101 |
Finger Thickness (English) | 18.1 mil |
Length (English) | 13 in. |
For Use With (Application) | Automotive, Food Processing, Machinery, Chemicals, Utilities, Warehousing |
Finger Thickness (Metric) | 0.45 mm |
EN ISO 374-1 | Type A |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 17 mil |
Palm Thickness (English) | 18.1 mil |
Certifications/Compliance | FDA 21 CFR 177.2600,ASTM F1671 |
Liner Material | Cotton Flock |
Glove Cuff Style | Gauntlet |
EN 421 | No |
Applications | Industrial |
Color | Green |
Material | Nitrile |
Thickness (Metric) | 0.46 mm |
Series | AlphaTec™ Solvex™ 37-175 |
ANSI Abrasion Rating | ANSI 4 |
Certifications/Compliance (Europe) | CE 0086, EN 420:2003 + A1:2009, Category III |
EN ISO 374-1 CHEMICAL LETTER CODES | JKLOPT |
Model | 37-175 |
Latex Free | Yes |
Lining | Lined |
Palm Thickness (Metric) | 0.45 mm |
Ansell AlphaTec™ 18 in. Solvex™ 37-185 Nitrile Gloves
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Heavy-duty, elbow length nitrile chemical resistant gloves suitable for a wide range of applications.

Chlorinated | Yes |
---|---|
Grip Design | Sandpatch |
Length (Metric) | 45.7 cm |
EN 421 | No |
EN388 Standard | EN 388:4102X, EN 388:4102 |
Color | Green |
Length (English) | 18 in. |
Material | Nitrile |
For Use With (Application) | Chemical plants and transportation, chemical processing, Oil refining and Petrochemicals, cleaning and de-greasing, exposure to chemicals, Solvents, hazardous liquids, PVC cements or standing Water, janitorial and maintenance work |
Thickness (Metric) | 0.55 mm |
Series | AlphaTec™ Solvex™ 37-185 |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 4 |
Certifications/Compliance (Europe) | CE 0493, EN 420:2003 + A1:2009, Category III |
EN ISO 374-1 CHEMICAL LETTER CODES | AGJKLPT |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 22 mil |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | FDA 21 CFR 177.2600 |
Manufacturing/QMS Audit Standards | ISO 18889 |
Glove Cuff Style | Gauntlet |