Transfer Pipets
MTC Bio Transfer pipette, 5ml, large bulb, sterile, 20 per bag, 500/cs
This item has a minimum qty of 4 per supplier requirements.These unbreakable, one-piece pipettes eliminate contaminated rubber bulbs, broken glass & exposure to infectious materials. They are made of ultra-clear, low density polyethylene (LDPE) & are ideal for microbiology, blood banking, hematology, immunology, & urinalysis. Sterile pipettes are excellent for tissue culture application. Their low-affinity surface reduces sample, cell or protein loss. Whether you make your selection based on length, build draw, pipette capacity or number of drops per ml, one of these ten designs is likely to be suitable for your application. Some have ultra-fine extended tips (P4113, P4117,P4121, P4122, P4133) that allow for extremely precise dispensing & access into the narrowest vessels.
GREENLABS LLC DBA GREENLABS RECYCLING Tips Transfer Bin manufactured in Massachusetts from 100% recycled lab plastic
This .95 gallon recycled tips transfer bin is designed for reusability on the bench. The sliding lid door can be secured to create a closed system and re-opened. The opening can accommodate a multi-channel pipette. The lid itself can be removed from the bin’s base. The design enables you to remove the lid and transfer materials into a larger hazardous waste receptacle and reuse the bin. This product was designed and manufactured in Massachusetts made of recycled material collected from Boston area laboratories. Each product will be uniquely colored and no dyes are added.
Chemglass Life Sciences 3L Media Transfer Vessel, Baffled Bottom, Barbed Fitting, Weldable C-Flex Tubing, Plugged, Sterile, Complete
Media Transfer Vessel is ideal for use when doing a gravity feed from a sterile 3L vessel.Fernbach flasks are sterile and individually double bagged.The 3L polycarbonate flasks with filter caps have a 3/16" barbed fittings that accept an 1/8" ID, 1/4" OD weldable C-Flex tubing end plugged.Supplied complete with a Tubing Clamp.Gamma irradiated Sterile.Please call for bulk pricing.
Research Products International Corp Disposable Plastic Transfer Pipettes, Sedi-Pet, 4.6ml Capacity, 500 per Package
Plastic transfer pipettes are molded into one-piece units from low density polyethylene. They eliminate cross-contamination encountered with rubber bulbs and reduce exposure when working with hazardous or infectious samples. Ideal for all laboratory procedures that require fast and safe transferring of liquids. Pipettes can also be used as freeze vials or as storage and transport containers by merely heat sealing the tips closed after filling. They can be sterilized if required by gas or radiation. Pipettes are supplied non-sterile.
Research Products International Corp Disposable Plastic Transfer Pipettes, Large Aperture, 9.3ml Capacity, 250 per Package
Plastic transfer pipettes are molded into one-piece units from low density polyethylene. They eliminate cross-contamination encountered with rubber bulbs and reduce exposure when working with hazardous or infectious samples. Ideal for all laboratory procedures that require fast and safe transferring of liquids. Pipettes can also be used as freeze vials or as storage and transport containers by merely heat sealing the tips closed after filling. They can be sterilized if required by gas or radiation. Pipettes are supplied non-sterile.
Research Products International Corp Disposable Plastic Transfer Pipettes, Sterile, Graduated 3ml Large Bulb, 7ml Capacity, Individually Wrapped, 500 per Package
Plastic transfer pipettes are molded into one-piece units from low density polyethylene. They eliminate cross-contamination encountered with rubber bulbs and reduce exposure when working with hazardous or infectious samples. Ideal for all laboratory procedures that require fast and safe transferring of liquids. Pipettes can also be used as freeze vials or as storage and transport containers by merely heat sealing the tips closed after filling.
Research Products International Corp Disposable Plastic Transfer Pipettes, Sterile, Graduated Fine Tip, 3.9ml Capacity, Individually Wrapped, 500 per package
Plastic transfer pipettes are molded into one-piece units from low density polyethylene. They eliminate cross-contamination encountered with rubber bulbs and reduce exposure when working with hazardous or infectious samples. Ideal for all laboratory procedures that require fast and safe transferring of liquids. Pipettes can also be used as freeze vials or as storage and transport containers by merely heat sealing the tips closed after filling.
Electron Microscopy Sciences Graduated Transfer Pipettes 7.5 ml, 3.2 ml Bulb draw, Bulk package
These polyethylene disposable have a low-affinity surface, attached bulb avoids cross-contamination, and are one step biohazard disposable. These pipets are ideal for clinical applications, blood banking, remove, disperse small volume, transfer in and out of multi well plates, reagent handing, pH meter maintenance, etc.
Bulb Draw: 3.2 ml
Drops/mL: 20
OAL: 15.5 cm
Electron Microscopy Sciences Transfer Pipette 9.3 ml, 4.8 ml Bulb draw, Bulk package
These pipets are good for blood banking, reagent handling, viscous liquid sampling and transferring, etc. The non-sterile pipets are bulk packed; the sterile are individually packed.
Bulb Draw: 4.8 ml
OAL: 13.7 cm
Stem diameter: 6.1 cm
Package: Bulk
Electron Microscopy Sciences 12 ml, Transfer Pipettes Straight
It works as a syringe. Inexpensive and Disposable. Good for liquid transfering tasks. Each pipette has calibration markings from 0 to 12ml in 0.2ml increments. Tubing may be attached to the tip to suit your application, and tips may also be cut to facilitate aspiration and delivery of fluids of varying viscosities.
Electron Microscopy Sciences Transfer Pipette 6.1 ml, 4.6 ml Bulb draw, Bulk package
These pipets are good for blood banking, reagent handling, viscous liquid sampling and transferring, etc. The non-sterile pipets are bulk packed; the sterile are individually packed.
Bulb Draw: 4.6 ml
Drops/mL: 20
OAL: 15.7 cm
Stem diameter: 6.1 cm
Package: Bulk
Electron Microscopy Sciences Graduated Transfer Pipettes 7.5 ml, 3.2 ml Bulb draw, Sterile individual package
These polyethylene disposable have a low-affinity surface, attached bulb avoids cross-contamination, and are one step biohazard disposable. These pipets are ideal for clinical applications, blood banking, remove, disperse small volume, transfer in and out of multi well plates, reagent handing, pH meter maintenance, etc.
Bulb Draw: 3.2 ml
Drops/mL: 20
OAL: 15.5 cm
Chemglass Life Sciences Transfer Cap Assembly, 2, 000mL, Advantaflex Tubing, 53B, Vented, Plugged End, Sterile
Transfer cap assemblies, vented for Single Use Media bottles are a cost effective and convenient way to transfer liquid.The venting port ends in a 30mm diameter vent filter with a 0. 20um pore PTFE (hydrophobic) membrane and barbed fitting.All components in contact with the media are USP Class VI and the Size 16 tubing has a clamp and a plugged end.Tubing with a tubing clamp and ending with a plugged end.Individually double bagged and gamma irradiated sterile.
Cole-Parmer Argos Technologies Transfer Pipette, 8.0 mL, Large Bulb, General Purpose; 400/Box
Low-density polyethylene (LDPE) makes these disposable pipettes with built-in bulbs the perfect substitute for breakable glass pipettes, eliminating cross-contamination and cumbersome rubber bulb changes. Plastic reduces the loss of cells and proteins that often occurs with binding that takes place with glass alternatives. Precision manufacturing ensures uniform repeatable drops. Heat seal pipettes to provide liquid-tight transport and storage. These pipettes are suitable for use with a temperature range of -50 to 90°C and can be gas sterilized.