Maintenance Lubricants and Penetrating Fluids
Perkin Elmer US LLC Fluid - Fomblin GV80 1 liter, For use with NexION ICP-MS only
For use with NexION ICP-MS only. One liter Fomblin GV80 fluid (per uoro polyether). 1L required per pump.
Malvern Panalytical FLUID HIGH PRESSURE 1 LITER
This item has a minimum qty of 2 per supplier requirements.
High Pressure Fluid, 1 literfor Vacuum Pump
Cotronics Corp Duralco 4703, Pint Trial Kit
Adhesive and Tooling Compound. Duralco 4703 is a composite of Cotronics' unique high temperature resins, metallic and ceramic particles. It offers the ultimate stability and strength in high temperature environments. Duralco 4703 has excellent resistance to most chemicals, solvents, acids and bases and is easily machined to close tolerances. Applications include repairing and rebuilding worn or cracked composites, dies, fixtures, jigs, etc. Users Report: Bond strengths over 3,000 psi are obtained at room temp. and1,200 psi at 500ºF. Retains over 85% of its tensile bond strength after 1,000 hours of service at 500ºF. Seals high performance thermocouples for use in high temperature corrosive environments. Duralco 4703 is ideal for use as a high temp. adhesive for bonding, potting, injection molding, matched dies, vacuum forming dies, extrusion dies and tooling.
Cotronics Corp Aluminum Durabond 950 Pint
Durabond Adhesives were specially formulated to bond metals, ceramics and dissimilar materials for use to 2000ºF. These metallic composite adhesives overcome the brittle bonds obtained with ceramics and offer some of the ductility and impact resistance associated with soldering and welding. Durabond adhesives can be drilled, tapped, machined, etc. They do not contain Epoxies or Silicones which would limit their use to 600ºF. These composites are inorganically bonded and chemically cured. They are safe and easy to use. No odors. No VOC's. Just mix, apply and cure at room temperature. Base: Aluminum, Color: Density (# / ft3) 120, Thermal Expansion (10-6/ºF) 10, Pot Life (Hours) 2, Bond Strength @ 200ºF (psi) 500 Bond Strength @ 1200ºF (psi) 1000, Components 2, Mixed Ratio (A / B) 100/60, Cure (@ R.T.) 24
Hampton Research HR3-413/Al's Oil (50:50 Paraffin:Silicon) - 250 ml
HR3-413/Al's Oil (50:50 Paraffin:Silicon) - 250 ml. Please note items from this supplier are non-returnable.
Waters Corp Rotary Pump Oil, Ultragrade 19, High Vacuum
This is a high-performance mineral oil designed for use in rotary vane vacuum pumps, suitable for applications requiring high vacuum.
- Spare part for Waters Quality systems.
- Provided as one unit per package.
- Requires replacement as needed.
Leybold Vacuum Products Inc Leybonol LVO 210 Synthetic Oil, 5 L
Synthetic oil (ester oil with additives). Very high thermal, oxidative and chemical stability, good deterging and dispersion characteristics, excellent wear protection. For high temperature applications, pumping of air, chemically inert gases, carbon dioxide (dry),carbon monoxide, organic solvent vapors, resin vapors, etc.
Enterprise Technology Solutions WypAll Power Clean Oil Grease
Power Clean Oil Grease and Ink Cloths 1/4 Fold 12 5 x 12 Blue 66/Box 8 Boxes/Carton
Krayden DOW CORNING 3-4680 SIL GEL KIT
Dow Corning 3-4680 Silicone Gel is two-part, fast RT cure gel with low viscosity which allows good flow under components. 2-part, transparent blue, 1:1 mix ratio, fast room-temperature-cure gel.