Maintenance Lubricants and Penetrating Fluids
Electron Microscopy Sciences Apiezon Vacuum Sealing Wax W100 Medium Hardness Vacuum Sealant 250 GR
Easy to use Apiezon waxes can be used as permanent or semi-permanent vacuum sealants or mounting media. The waxes have a high purity combined with powerful gettering and clean meltdown properties. An excellent waterproof media that is easy to use and to remove. 10 year shelf life. Wax W100 is a medium hardness vacuum sealant and mounting wax.
Use: Medium Hardness Vacuum Sealant / Mounting Wax
Electron Microscopy Sciences Apiezon High Vacuum Grease Type M 100 GR
Similar to grease type L, but it contains more wax. Grease M has an estimated vapor pressure @ 20 degree C of 2x10-9 torr, higher than Type L. Type M is recommended for applications where a grease of moderately low vapor pressure is required; such as for sealing ground joints on the backing side of oil diffusion pumps.
Electron Microscopy Sciences Fluoromount-G™ Slide Mounting Medium 25 ML
A special mounting media for immunofluorescent staining procedures. It is a water soluble, non-fluorescing medium which is well suited for use when the staining procedure has an aqueous final step. It contains 10% polyvinyl alcohol in phosphate buffered glycerol with 0.1% sodium azide as a preservative. One bottle is sufficient to mount up to 500 slides.
Enterprise Technology Solutions 3-Subject Spiral Notebooks
Spiral Notebooks 3-Subject Medium/College Rule Randomly Assorted Cover Color (120) 10 5 x 8 Sheets
Enterprise Technology Solutions Spiral 1-Subject Notebooks
Spiral Notebooks 1-Subject Wide/Legal Rule Randomly Assorted Cover Color (70) 10 5 x 8 Sheets
Electron Microscopy Sciences Epo-Tek H22 Adhesive 1 OZ
Epo-Tek H22 is a two component, silver-filled epoxy system, designed for die bonding and sealing hybrid circuit and recommended for SEM small angle cleavage and wafer bonding.
Mixing ratio of silver resin paste and liquid hardener is 100:4.5. Pot life 16 hours, and shelf life is 6 months at room temperature. Smooth, free-flowing, slightly thixotropic paste. High Tg allows it to be used for high temperature applications (≤300 degree C). Contains no solvents – It is a NASA approved low outgasing epoxy. Excellent resistance to solvents, chemicals and moisture. Extended pot life and fast curing at low temperature <100 degree C.