Maintenance Lubricants and Penetrating Fluids
Ted Pella Inc PELCO Colloidal Silver Paste, 25g
Ideal where a nonflowing paste is needed for special applications. Particle size: 0.4-1.0µm, 80% are below 1.0µm. Cures in 16-20 hours, or 30 minutes @125-150°C. Clear lacquer base. Approximate Specific Gravity 2.25g/cc3. Service temperature = 200°C. Use #16021 gold/silver thinner/extender to dilute if needed.
Ace Glass, Inc. High vacuum grease - lvp Krytox lvp DuPont
High vacuum grease - lvp Krytox lvp DuPont
Precision Plus Vacuum Parts Inc Edwards,E2M2, E2M5, E2M8, Mist Filter
Edwards,E2M2, E2M5, E2M8, Mist Filter Replacement EMF10, 20PSI
Ace Glass, Inc. Fluorinated grease - gpl Krytox gpl DuPont
Fluorinated grease - gpl Krytox gpl DuPont
Ace Glass, Inc. 1oz Stir-Lube stirrer lubrication
1oz Stir-Lube stirrer lubricant is a superior, low melting, silicone based lubricant which liquefies at body temperature. Its composition allows for application of a very thin layer to a stirring shaft to increase bearing and shaft life at least three times over that of a bearing lubricated with glycerine.
Perkin Elmer US LLC Fluid - Fomblin GV80 1 liter, For use with NexION ICP-MS only
For use with NexION ICP-MS only. One liter Fomblin GV80 fluid (per uoro polyether). 1L required per pump.
PFEIFFER VACUUM INC Pfeiffer Vacuum P3 Mineral Oil, Rotary Vane Pump, 5 L, Hydrocarbon, Oxidation-Resistant
P3 mineral oil is a high-quality mineral oil designed for standard applications in rotary vane pumps. It is suitable for pumping air, inert gases, and noble gases, and can withstand operating temperatures up to 95 °C. This oil features extremely low vapor pressure and is oxidation-resistant, contributing to an achievable ultimate pressure of less than 1 · 10-3 hPa. The operating fluid amount is 5 L.
- High-quality mineral oil for standard applications
- Used for pumping air, inert gases, and noble gases
- Suitable for high operating temperatures up to a maximum of 95 °C
- Extremely low vapor pressure (1 · 10-3 hPa)
- Oxidation-resistant
- Designed for use with rotary vane pumps
- Volume: 5 L
- Achievable final pressure of less than 1 · 10-3 hPa
Electron Microscopy Sciences Thermally Conductive Adhesive ETC Bond 860 25 GR
Thermally conductive adhesive, Aluminum nitride filled, 1:1 epoxy paste, Excellent mechanical & thermal properties to 400 deg F.
Electron Microscopy Sciences M-Bond System, M-Bond 600, 1 kit
The M-Bond adhesives are high-performance epoxy resins, which are formulated especially for bonding strain gages and special-purpose sensors. When properly cured, these adhesives are useful in temperatures ranging from -452F to +350 F (-269C to+ 175C) with M-Bond 43-B, and to +700F (+370C) for short periods with M-bond 600 and 610. In common with other organic materials, oxidation and sublimation effects at elevated temperatures limit life. Shelf Life: 3 months.
Curing time: 3.5 hours at +350F (170C)
Package: 4 x 10 ml A and 4 x 15 ml B
Electron Microscopy Sciences Microtome Oil 50 ML
A chemically pure, high-grade lubricant used in precision instruments. Should be used periodically to lubricate cross-rollerbearings for microtomes.
Smooth On Inc Ecoflex™ 00-50, 2lb
Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.
Hampton Research HR4-312/Beeswax Stick - 7 pack
HR4-312/Beeswax Stick - 7 pack. Please note items from this supplier are non-returnable.