pH Meter Accessories
Oakton by Cole-Parmer Submersible 3' L pH Probe, SJ/ABS/100Ohm RTD; Plug/BNC
This submersible electrode operates from 32 to 176>F (0 to 80>C). Submerse it up to the cable and measure pH from 0 to 13.
Cole-Parmer BNC-to-Stripped Wire Adapter
Use this female BNC-to-stripped wire end connector to simplify connection and replacement of pH/ORP electrodes with male BNC connections to transmitters and controllers with terminal block connectors.
Bellco Glass, Inc. Cable has ak9 probe connection and bnc controller connection.Size: 10"
Cable has ak9 probe connection and bnc controller connection.Size: 10"
Cole-Parmer Oakton pH Electrode, Epoxy, Double Junction, 9-mm OD
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer Electrode cable, detachable, 10-ft, BNC
Detachable cable features BNC connection for compatibility with most pH meters and controllers.
Cole-Parmer Oakton Down-Well pH/CON/Temp Electrode with 10 ft Cable F/ PC10 Meter, 35 mm OD
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.
Chemglass Life Sciences 12mm Shaft Diameter, 450mm Usable Shaft Length, 20mm Minimum Immersion Length, Glass Shaft Material, Fixed Cable Electrode Head, 0 to 100°C Temperature Range
Metrohm pH electrodes designed to be used with Chemglass reactors and data loggers. All electrodes are supplied with integrated PT 1000 sensor for temperature correction and have a BNC connector. 12mm Shaft Diameter, 450mm Usable Shaft Length, 20mm Minimum Immersion Length, Glass Shaft Material, Fixed Cable Electrode Head, 0 to 100¿C Temperature Range.12mm OD probes designed to go directly into smaller reactors using the standard taper joint adapters (CG-1872-A-01 through CG-1872-A-03).
Grainger pH Insertion Assembly CPVC BNC Flat Tip
The Grainger 16Z021 is a 3M Scotch-Brite General Purpose Hand Pad that can be used for light duty scrubbing and cleaning. It measures 6 inches by 9 inches and features an open web design that rinses easily. The pad is made of high-quality fibers that are non-scratching on most surfaces. It can be used wet or dry on a variety of materials. The 3M Scotch-Brite pad is ideal for general purpose cleaning in industrial, food service, and commercial settings. It provides an economical and effective cleaning solution.
Hach Company Online Process pH Sensor
Hach pHD sc Online Process pH Sensor - General Purpose pH SensorGeneral Purpose Online Process pH Sensor with Integrated Digital Electronics for in Plug and Playin with Hach sc Digital Controllers - pHD Technology Glass pH Electrode PEEK Housing Convertible Mount 10m Cable
