Probes and Electrodes
Cole-Parmer pH electrode extension cable 25'
Cables feature BNC connectors. Select from two different lengths.
Hach Company Replacement Sensor for CLF10sc
Replacement Sensor for CLF10 sc Free Chlorine Analyzer Stainless Steel Tip
Hach Company J Glass Electrode w/temp
Replacement sensor -- J Glass Electrode with Temperature CompensationGlass Pg 13 5 Gel Filled Temperature Compensation
Grainger pH Electrode Glass BNC Round Tip
The SensoRex pH Electrode is a combination pH electrode with a glass body and gel-filled reference. It has a double junction reference design for reduced contamination. The electrode has a pH range of 0-14 pH, a temperature range of 0-80°C, and 12 mm diameter x 120 mm length. It has a BNC connector and 1 m cable. The electrode is designed for general purpose pH measurement in liquids. It has a fast response time and is compatible with most pH meters. The replaceable reference design allows for extended electrode life.
Hach Company Electrolyte for Ozone Sensors, 2 x 25 mL Bottles
Electrolyte solution intended for maintenance and replenishment of ozone sensor cells. Supplied as two small bottles for controlled application and convenient storage.
- Two 25 mL bottles for convenient handling and dosing.
- Formulated for electrolyte replenishment of ozone sensors.
- Helps maintain stable sensor performance and accurate ozone measurement.
- Liquid form enables straightforward application without special tools.
Chemglass Life Sciences pH Probe Cable K8 connection to BNC, 6'
pH Probe Cable K8 connection to BNC, 6'. Standard BNC connector to AK9 provides interface connection between pH probe and controller. For use with CLS-1438-002.
World Precision Instrument Electrode Holder for KWIK-Tips
- Use with KWIK-TIP Ion Selective Electrodes
- TIPA-Calcium
- TIPH-Hydrogen
- TIPK-Potassium
- TIPTPP-TPP+
MSC Fowler Electronic Universal Protractor, Hardened Stainless Steel, 0-360° Range, 30-Second Resolution
This electronic universal protractor features a hardened stainless steel construction, offering a measuring range of 0-360°. It provides a resolution of 30 seconds and includes both 6 and 12 inch blades for versatile applications.
- Constructed from hardened stainless steel.
- Offers range selection options: 1x360°, 2x180°, 4x90°.
- Features a dual reading LCD display for arc minutes and decimal degrees.
- Includes a preset function.
- Comes with 6 in and 12 in blades and an acute angle attachment.
- Equipped with fine adjustment for precise measurements.
- Provides a measuring range of 0-360°.
- Delivers a resolution of 30 seconds.
- Ensures an accuracy of ±5 minutes.
MSC SPI Electronic Outside Micrometer, 6-7 inch, IP54, Friction Thimble, Carbide Faces
This electronic outside micrometer is designed for precise measurements in various applications. It offers a measuring range from 150.00 mm up to 7 inches and is built with IP54 level protection, making it suitable for use in environments where dust and water splashes are a concern. The instrument supports both absolute and incremental measuring modes and features durable carbide measuring faces for consistent accuracy. It comes complete with a fitted case for protection and includes a battery for immediate use.
- IP54 level protection
- Carbide measuring faces
- Absolute and incremental measuring modes
- NIST traceability certification
- Short form calibration certificate included
- Furnished in a fitted case
- Includes battery
- Two year limited warranty
MSC SPI Electronic Caliper, 200 mm, 8 in, 0.0005 in Resolution, IP67, Stainless Steel
This electronic caliper is designed for precise measurements in various applications. It features a robust stainless steel construction, an IP67 rating for protection against dust and water, and offers both metric and imperial measurements.
- 200 mm (8 in) maximum measurement range.
- Resolution of 0.01 mm (0.0005 in).
- Accuracy of ±0.03 mm (±0.0015 in).
- IP67 rated for protection against dust and temporary immersion in water.
- Constructed from durable stainless steel.
- Features inside/outside jaw style for versatile measurements.
- Powered by a CR2032 lithium battery.
- Automatically shuts off after 5 minutes of inactivity to conserve power.
- Includes inside diameter jaws and a depth measurement rod.
- Comes with a protective case.
MSC Fowler Electronic Caliper Gage, Inside, 12.70 to 150 mm
This electronic caliper gage is designed for inside measurements, offering a range of 12.70 mm to 150 mm with 0.01 inches accuracy. It features a Radius to Radius contact point, is powered by a CR2032 battery, and supports absolute/incremental modes with RS-232 output.
- Measures inside dimensions for hole, groove, and tube thicknesses.
- Digital LCD displays inch and metric units.
- Absolute and incremental modes with preset reference storage.
- Spring-loaded design for consistent measuring force.
- Thumb lever for movable point retraction.
- RS-232 output for data transfer.
- Durable construction: plastic housing, steel arms, hardened steel contact points.
- Includes 3V CR2032 battery.
- Comes with aluminum case and foam inserts.
MSC Mitutoyo Electronic Depth Micrometer, 0-6 inch, 4 inch Base, 6 Rods
This electronic depth micrometer provides precise measurements across a 0-6 inch (0-152.4 mm) range with a resolution of 0.00005 inch (0.001 mm). It features a 4 inch base and includes 6 interchangeable rods, suitable for various depth measurement tasks.
- 4 inch base
- 6 interchangeable rods
- Rod diameter of 4 mm
- Rod length adjustable in 1 inch (25 mm) increments
- Measuring rod clamps ensure measurement stability
- Ratchet stop thimble provides constant measuring force
- SPC output function
- Functions: origin set, zero setting, data hold, data output, function lock, 2 presets, and inch/mm conversion
- Alarms for low voltage and counting value composition error
- Steel measuring face material
- Uses an SR44 battery
MSC Renishaw Stylus Tool, M2 and M3 Thread, Styli Mounting
This stylus tool is designed for use with M2 and M3 threaded styli. It facilitates the interchangeability of M2, M3, M4, and M5 threaded styli on most touch trigger probes, making it particularly useful for adapting specialized M2 styli for larger probes.
- Allows interchangeability of M2, M3, M4, and M5 threaded styli
- Designed for correctly mounting styli onto probes
- Enables construction of specialized stylus combinations
- Includes a safety feature to prevent thread damage from overtightening