pH, ORP, and Titration, Combination Electrodes
METTLER TOLEDO pH Sensor InPro 3253SG 225/PT100
The InPro 3253SG 225/PT100 is a pre-pressurized, liquid filled, low maintenance pH & ORP (Redox) sensor, combined with a PT100 temperature sensor, for in-line measurement in demanding applications. This version is 225 mm long.
Grainger ORP Electrode CPVC BNR Flat Tip
The SENSOREX S265CD-ORP ORP Electrode is an oxidation-reduction potential (ORP) electrode designed for water treatment applications. It has a platinum sensor and ceramic junction for measuring ORP in the range of ±2000 mV. The electrode has a 3/4" NPT thread connection, epoxy body, and 10 ft cable. It requires a separate reference electrode and is compatible with SENSOREX ORP controllers and transmitters. The electrode provides stable ORP measurement in treated water.
Oakton by Cole-Parmer In-Line pH Probe, SJ/PVDF/100Ohm RTD/10'; Plug/BNC
In-line electrodes operate from 32 to 212°F (0 to 100°C) and have a chemical-resistant PVDF housing with a 1/2'' NPT(M) thread. Housing measures 4'' x 15/16'' diameter. Electrode extends 1'' beyond housing. Maximum pressure 100 psi. Measure pH from 0 to 13.
Bellco Glass, Inc. pH Probe,12x325mm Mettler
Electrodes are filled with gel reference electrolyte under a pressure of 25 BAR pressure range from vacuum up to a process of max 36 PSI 25 BAR. Temperature range steam sterilization autoclave to 266F to 130C. In-Situ sterilization up to 100 cycles under standard conditions. Gel electrolyte eliminates fill requirements to reduce maintenance. Patented silver-ion trap prevents sulfide-bearing poisoning of the liquid junction increasing electrode life even in sulfide-bearing media suitable for direct insertion through compression fittings or top or side mounting in a stationary or retractable housing. Engraved serial number on each electrode for easy identification when working under GMP.
Waters Corp Body, 2465 Salt Bridge Reference Electrode
Waters Corporation Body, 2465 Salt Bridge Reference Electrode
Cole-Parmer pH Electrodes for Field Use; single-junction 10 foot cable
These combination electrodes withstand the most demanding field conditions—the semi-domed tip protects the pH bulb and ensures a quick response when taking measurements in harsh and dirty environments. Easy-to-clean electrodes feature an impact-resistant epoxy body for further protection from the elements. The large, annular ceramic reference junction and sealed cross-linked polymer reference resist clogging. Operating range is from 0 to 14 pH. Electrodes measure 110 mm L x 12 mm dia and withstand temperatures up to 212°F (100°C). All models have BNC connectors.
Cole-Parmer Oakton Basic conductivity/tds meter
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer ELECTRODE ORPFLAT.KYNAR
Accessories improve use of your products and increase efficiency. Spare parts help keep your equipment running smoothly.
Electron Microscopy Sciences Electrode Single Hole Flex Arm
This flexible arm assists by holding and positioning electrodes or other objects in an direction. The base is solid polyethylene and comes complete with 3-M double sided mounting tape on the bottom to secure the unit to the table top. The unit is available in either a one or two hole head configuration.