pH, ORP, and Titration, Combination Electrodes
Cole-Parmer pH electrode, Refillable/SJ/Glass/Extra-Long/Thin/326x8mm; BNC
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.
Cole-Parmer pH Probe, DJ/Glass/100Ohm RTD/12mm/10'; Tinned/BNC
General purpose, double-junction electrodes prevent contamination of the AgCl reference cell by solutions that might react with silver (heavy metals, organics, sulfides). Electrodes can be used for measurements up to pH 13. Maximum pressure is 150 psi at 25°C.
Cole-Parmer pH Probe, Refillable, High-temp, pH with high Na+
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.
Waters Corp Working Electrode Block, 3 mm, Gold
The Working Electrode Block houses the working electrode, in this case, the 3mm gold electrode. The flowcell is composed of a working electrode (housed by the working electrode block) and a reference electrode (housed by the inlet block) and the two blocks are separated by a spacer.
Chemglass Life Sciences PH Electrodes for Chemglass Reactors, 12mm Shaft Diameter, 300mm Usable Shaft Length, 20mm Minimum Immersion Length, Glass Shaft Material, Fixed Cable Electrode Head, 0 to 100°C Temperature Range
Metrohm pH electrodes designed to be used with Chemglass reactors and data loggers. All electrodes are supplied with integrated PT 1000 sensor for temperature correction and have a BNC connector. 12mm Shaft Diameter, 300mm Usable Shaft Length, 20mm Minimum Immersion Length, Glass Shaft Material, Fixed Cable Electrode Head, 0 to 100°C Temperature Range.12mm OD probes designed to go directly into smaller reactors using the standard taper joint adapters (CG-1872-A-01 through CG-1872-A-03).
World Precision Instrument Potassium Electrode Tips, Replacement
Replacement tips
Set of 3 potassium replacement tips for ion selective electrodes. Change the tip on your holder in less than a minute. Can be stored 3-4 months under refrigeration.
World Precision Instrument STX HTS EVOM Electrode for CORNING 96
Semi-permeable HTS (high throughput screening) culture plates have become a standard tool for pharmaceutical and institutional research in epithelial transport. HTS culture plates have well cups which are bonded together into a single assembly and are not removable. This makes the plates ideal for automated applications, but imposes a significant inconvenience when TEER must be measured in the absence of an automated system. WPI’s STX HTS series of EVOM™ electrodes, replacing the STX100 electrodes, provide a cost-effective alternative to automation, allowing HTS well plates to be measured manually using a hand–held electrode.
To learn more about our warranty options, click here.
World Precision Instrument Carbon Fiber Electrode, L 100 um
Electrochemical detection of oxidizable compounds
Carbon fiber microelectrodes have been used in both the detection of oxidizable compounds (Gonon, et al., 1978; Cahill and Wightman, 1995) and extracellular single-unit recording (Armstrong-James and Millar, 1979). WPI™s ultra-sensitive and low-noise carbon fiber (CF) electrodes can be applied, with our Micro-C Potentiostat or similar instruments, in the electrochemical detection of catecholamines (epinephrine, norepinephrine and dopamine), indolamines (serotonin, 5-HT or melatonin), Fe (II) and other oxidizable compounds.
World Precision Instrument Electrode Adapter for DAM50 Bioamplifier
Simplify your input connections to the DAM50 when you are setting up your applications
This optional electrod adapter is designed for use with the DAM50 Bioamplifier. See some of the sample setups possible with this component in the Details below.
World Precision Instrument Carbon Fiber Electrode, Length 50 um
Electrochemical detection of oxidizable compounds
Carbon fiber microelectrodes have been used in both the detection of oxidizable compounds (Gonon, et al., 1978; Cahill and Wightman, 1995) and extracellular single-unit recording (Armstrong-James and Millar, 1979). WPI™s ultra-sensitive and low-noise carbon fiber (CF) electrodes can be applied, with our Micro-C Potentiostat or similar instruments, in the electrochemical detection of catecholamines (epinephrine, norepinephrine and dopamine), indolamines (serotonin, 5-HT or melatonin), Fe (II) and other oxidizable compounds.
World Precision Instrument Electrode Handle 4.0 mm
Electrode holder for popular manipulators
This 4.0 mm electrode holder is designed for use with Narishige and Zeiss manipulators
Hach Company Radiometer Analytical PHC2011-8 Combination Red-Rod pH Electrode for Alkaline Samples (alkaline glass, glass body, BNC)
The Radiometer PHC2011-8 Combination pH Electrode has a glass body, Red-Rod reference system, refillable electrolyte (sat. KCl) and porous pin junction. The PHC2011-8 has a glass membrane specific for alkaline samples. The PHC2011-8 is compatible with Hach Sension+ laboratory pH meters (or any meter with a BNC connection).
Hach Company Radiometer Analytical PHG311-9 Glass pH Electrode for Alkaline Samples (alkaline glass, screw cap)
The Radiometer PHG311 pH Electrode has a glass body and pH membrane specifc for alkaline samples. The PHG311 should be used with Ag/AgCl or calomel reference electrodes for general purpose applications. The PHC311-9 is a screw cap electrode and requires the CL114 cable (part no. A94L114) for compatibilty with Hach Sension+ laboratory pH meters (or any meter with a BNC connection).
Hach Company Radiometer Analytical PHC3005-9 Combination pH Electrode (epoxy body, Ag/AgCl ref., screw cap)
The Radiometer PHC3005-9 Combination pH Electrode has a robust epoxy body, Ag/AgCl reference system, refillable electrolyte (3M KCl + sat. AgCl) and porous pin junction for general purpose applications. The PHC3005-9 is a screw cap electrode and requires the CL114 cable (part no. A94L114) for compatibilty with Hach Sension+ laboratory pH meters (or any meter with a BNC connection).