Conductivity Electrodes
Cole-Parmer Hach 3422C3A Contacting Conductivity Cell, 1000 ohm Pt RTD, titanium, K=1.0
Nonmetallic Ryton PPS cells 19065-55 and -57 have graphite electrode with 34" NPT(M) threads for mounting onto a 34" pipe tee or immersion applications. Sensor includes built-in 1000 Pt RTD and 20-ft (6-m) cable. PVDF cells 19065-60 through -68 have titanium electrodes with either 12" or 34" NPT(M) compression fitting for mounting onto a pipe tee with up to four inches of insertion depth. Reversing the compression fitting enables the sensor to be fastened onto the end of an immersion pipe. Cells include built-in 1000 Pt RTD and 20-ft (6-m) cable.
Cole-Parmer Conductivity Cell, K=10.0, 10 Kohm ATC, PVDF body
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Hach Company Radiometer Analytical CDC641T-6 Conductivity Cell with Temperature Sensor (2-pole Pt sensor, k = 0.85 cm⁻¹, glass body)
The Radiometer CDC641T-6 is a 2-pole conductivity cell with platinized, platinum sensor (k = 0.85 cm-1), glass body and integrated temperature sensor. The CDC641T-6 sensor's 2 platinum plate design is ideal for routine conductivity measurements or for continuous measurement in various aqueous and non-aqueous media. Additionally, the CDC641T-6 meets requirements of EP 2.2.38. The cell has a fixed cable with RJ45 plug for use with Hach sensION+ benchtop conductivity meters.
Hach Company Radiometer Analytical CDC641T Conductivity Cell with Temperature Sensor (2-pole Pt sensor, k = 0.85 cm-1, glass body)
The Radiometer CDC641T is a 2-pole conductivity cell with platinized, platinum sensor (k = 0.85 cm-1), glass body and integrated temperature sensor. The CDC641T sensor's 2 platinum plate design is ideal for routine conductivity measurements or for continuous measurement in various aqueous and non-aqueous media. Additionally, the CDC641T meets requirements of EP 2.2.38. The cell has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M022 for a version of the CDC641T with RJ45 plug, compatible for use with Hach sensION+ benchtop conductivity meters.
Sigma Aldrich Fine Chemicals Biosciences Amidase from Pseudomonas aeruginosa recombinant, expressed in E. coli, buffered aqueous glycerol solution, hydroxamate transferase >=200 units/mg protein (biuret) | 9012-56-0 | MFCD00166319 | 250UN
Amidase from Pseudomonas aeruginosa recombinant, expressed in E. coli, buffered aqueous glycerol solution, hydroxamate transferase >=200 units/mg protein (biuret) | 9012-56-0 | MFCD00166319 | 250UN
Cole-Parmer Oakton Flat-Surface Conductivity Probe, K = 1.0, 1 m Cable
If your conductivity measurements are off, you might need a new cell, sensor, or calibration kit. Update, upgrade, or replace to get the best out of your Oakton conductivity, resistivity, or TDS meter.
Grainger Toroidal Conductivity Kit Noryl
The SensoRex Toroidal Conductivity Kit is a portable conductivity meter kit designed for water quality testing. It includes a toroidal conductivity sensor, calibration solutions, carrying case, and 9V battery. The meter has a measurement range of 0 to 1999 μS/cm, resolution of 1 μS/cm, and accuracy of ±2% full scale. The toroidal sensor provides flow-through measurement and resists polarization and fouling. This kit is ideal for testing drinking water, wastewater, process water, and more. The rugged carrying case allows for convenient field use.
Hach Company Intellical™ CDC401 Field 4-Poles Graphite Conductivity Cell, 10 m Cable
Intellical™ CDC401 is a digital, graphite, 4-pole conductivity cell with a temperature sensor. This Rugged CDC401 version is built with a stainless steel body ensuring sufficient weight to the probe for an easy outside handling, the sensing part is protected by a shroud, and the connection is ensured by strong and visible yellow coloured cable onto which you can clip depth markers (optional accessories), making the CDC401 rugged models specially designed for field use. CDC401 Rugged is available with a 5, 10, 15, or 30 meters cable. The CDC401 Rugged is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in all types of external environment such as river, surface and ground waters, ponds, lakes, sea, wastewater plant, source water, drinking water reservoir for water quality, environmental and treatment process purposes.
