pH Electrode Accessories
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger Approved pH Electrode Epoxy BNC is a pH electrode with an epoxy body and BNC connector. It has a glass bulb sensing element and measures pH from 0-14 pH with an accuracy of ±0.1 pH. The electrode has a temperature range of 0-80°C. It has a response time of less than 10 seconds and an impedance of less than 500 MΩ. The electrode is 12 mm diameter x 150 mm length. It requires a BNC connector and is compatible with standard pH meters. The electrode is maintenance free with no refilling required.
Grainger pH Electrode Glass BNC Round Tip
The SensoRex pH Electrode from Sensorex is a glass body combination pH electrode designed for general purpose pH measurement in the laboratory. It has a 12 mm diameter glass body, gel filled reference with Ag/AgCl reference wire, ceramic junction, and BNC connector. The electrode has a pH range of 0-14 pH, temperature range of 0-80°C, and impedance of less than 150 MΩ. It requires storage solution and features a quick response time. The electrode can be used for testing water, wastewater, food products, chemical solutions, and more. It is compatible with any pH meter, transmitter, or controller with BNC connector.
Grainger pH Electrode Glass BNC Round Tip
The SensoRex pH Electrode is a combination pH electrode with a glass body and gel-filled reference. It has a double junction reference design for reduced contamination. The electrode has a pH range of 0-14 pH, a temperature range of 0-80°C, and 12 mm diameter x 120 mm length. It has a BNC connector and 1 m cable. The electrode is designed for general purpose pH measurement in liquids. It has a fast response time and is compatible with most pH meters. The replaceable reference design allows for extended electrode life.
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger Approved pH Electrode is a gel-filled, combination electrode designed for general purpose pH measurements. It has a glass body and epoxy body material with a single junction reference. The electrode has a 12 mm diameter pH bulb and is compatible with pH 0-14 measurement range. It has BNC connector type and impedance of less than 600 MOhm. The electrode is maintenance free with no refilling required. It can be used for water, wastewater, food processing and other aqueous solutions. The electrode requires a pH/ORP meter for operation.
Cole-Parmer Oakton Electrode Fill Solution, 3.8M KCL, 2/pack
This solution comes in a pack of two 125 mL bottles, which is enough to fill about 25 electrodes.
ELECTROCELL NORTH AMERICA INC PP ELECTRODE SPACERS 2MM 2PCS
PP electrode spacers, 2 mm thick, set of 2 pieces
Hach Company Sension 5292 Cond cell
Sension Plus 5292 Conductivity cell with two Platinum plates for general measurements in lab Conductivity cell with two Platinum plate electrodes and glass body for Sension Plus Laboratory Meters Cell constant k is 1 cm-1 1 m cable Measuring range 100 micro siemens/cm at 10-80C
Hach Company Sension 5208 pH liquid filled
Sension Plus 5208 pH liquid filled combination electrode for Micro Sample volumes-3 mm diameter-screw cap S7 pH liquid electrode (refillable) with ceramic diaphragm Glass body Range 0-14 pH at 0 to 80C Screw cap S7 3 mm diameter 5 mm minimum immersion depth This pH electrode is suitable for Micro Sample volumes
Hach Company Sension 5293 Platinum Conduct
Sension Plus 5293 Platinum Conductivity cell for general measurements in lab Conductivity cell with 3 Platinum electrodes and glass body for Sension Plus Laboratory Meters Cell constant k is 0 7 cm-1 Built-in Pt1000 for automatic temperature compensation 1 m cable Measuring range 0 2 to 100 micro siemens/cm at 30-85C
Hach Company Hach Beaker for Electrode/Sensor Calibration, Colorless, 30 mL, Pack of 80 (for pH electrode and conductivity cell calibration)
Colorless, graduated 30 mL plastic beakers designed for electrode and sensor calibration. Sold as a pack of 80 single-use beakers, they provide an economical, disposable option for pH electrode and conductivity cell calibration, helping ensure correct buffer volumes and reducing cross-contamination during routine calibration procedures.
- Colorless, clear plastic construction for easy buffer visibility.
- 30 mL graduated capacity for accurate buffer measurement.
- Pack of 80 disposable beakers to reduce contamination risk.
- Suitable for pH electrode and conductivity cell calibrations.
- Economical design to minimize buffer waste during calibration.
