pH Electrode Accessories
ALPHA MEASUREMENT SOLUTIONS LLC 10FT CABLE COMBINATN PH PROBE
NC2956610 10FT CABLE COMBINATN PH PROBE
EZKEM Cable Amperometric Detector for the FS3700
EZkem’s Amperometric Detector cable for the FS3700 instrument is available as a replacement cable for a worn cable or necessary if you are adding Cyanide (and our Amperometric Flow Cell) to a instrument already running a photometric channel (or if you are converting a photometric channel to an ampermetric channel).
Chemglass Life Sciences Complete Baffles for use in 10L-20L Reactors: Overall Baffle Length: 32", Effective Baffle Length: 13.5", Baffle Width x Depth (mm): 19 x 19, Lower Compression TFE Fitting: 3/4" to 12mm, Adapter Joint Size: 45/50
Features: Available in Square or Rectangular Shapes, with Open BottomPTFE Joint is Offset Permitting Baffle to be Adjusted up to 1" Towards the Center of the ReactorBaffle Can Be Vertically Adjusted Inside ReactorHollow Baffles Allow pH Electrodes to be Inserted Into the Reaction Complete Baffles Consist of: Glass Baffle, Glass Fillted PTFE Adapter, and Lower PTFE Compression Fitting. glass baffle system for process reactors from 10L to 50L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. All baffles have 3/4" precision ground top and lower tubing for use with compression fittings and top jointed adapter. PLEASE NOTE: SEE CG-1971 FOR THERMOCOUPLE BAFFLES AND CG-1872 FOR pH ELECTRODES. †Designed and developed by John Korzun, Bristol Myers Squibb,Brunswick, NJ
Chemglass Life Sciences BNC Female to Male Extension Cable, 4ft
BNC Female to Male Extension Cable, 4ftBNC extension cable for CG-1872-A series of electrode adapters. Adapter permits CG-1872 series pH electrode(12mm OD) to be inserted either directly into smaller reactors or down through a CG-1872-B baffle.
Cole-Parmer pH electrode extension cable 25'
Cables feature BNC connectors. Select from two different lengths.
Chemglass Life Sciences pH Probe, with VP, 12 x 120mm
pH probe with VP, 12x120mm. • pH Range: 0-12 • Electrodes are filled with gel reference electrolyte under a pressure of 2.5 bar • Pressure Range: From vacuum up to a process of maximum 36PSI (2.5 bar) • Temperature Range: Steam sterilization/autoclavable to 266°F (0 to 130°C) • In-situ sterilization: Up to 100 cycles under standard conditions • Fully autoclavable or in-situ sterializable
Cole-Parmer Oakton Electrode Electrolyte Powder
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cayman Chemical ε-NAADP sodIum salt 3.8mg
An antagonist of calcitonin and amylin receptors inhibits human calcitonin-induced cAMP accumulation in COS-7 cells expressing the human calcitonin receptor AMY1a or AMY3a (pKBs 7.15 7.3 and 7.37 respectively) protects against AB42-induced apoptosis in primary rat basal forebrain neurons at 10 UM intrathecal administration increases the paw withdrawal threshold in the von Frey test in a rat model of chronic peripheral neuropathic pain induced by spared nerve injury reverses sCT-induced decreases in food intake in food-deprived rats at 10 Ug/kg
World Precision Instrument 13776 Adapter, Reference Electrode to Ground Jack
- Connector A: Banana (male)
- Connector B: 2 mm jack
- Cable: none
Ace Glass, Inc. Adapter, pH probe, 48in, FETFE O-ring, complete
Adapter, pH probe, 48in, FETFE O-ring, complete
Ace Glass, Inc. Adapter, pH probe, 36in, FETFE O-ring, complete
Adapter, pH probe, 36in, FETFE O-ring, complete
Med Vet International ECG Resting Electrode Welch Allyn Paper Backing Tab Connector, 108071, 50/Case
Sold by the case, 5000 electrodes per case Synthetic paper material Conductive Adhesive Gel Patented traction liner prevents tabs from sliding off liner saving time and money Pliable substrate conforms to body Ag/Ag chloride