Animal Care and Research
Med Vet International Locking Screw, 2.7mm x 28mm, J1133L
Locking Screws and Plates. A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Plates 2.7mm 28mm
Med Vet International Humidification Management Exchanger, Mini, 0-11 lbs, J0606, 5 Pack
In human anesthesia the prevention of moisture andheat loss is a critical consideration. The smaller patientis especially a concern because hypothermia is more likely to occur. Humidification management exchangers are routinely used in human anesthesia. Veterinarians are starting to recognize the value of these products andmake them part of their anesthetic regime.The Humid-Vent is a compact connector that is a heat and moisture exchanger. They are placed in the breathing circuit between the "Y" piece (or "T" piece for non-rebreathing) and the endotracheal tube. Inside the connector is a special medium consisting of hygroscopic, naturally absorbent microwell paper. The Humid-Vent can be used up to 24 hours. After 24 hours they lose their effectiveness and must be replaced. In veterinary use they are typically replaced weekly. 5/box.
Med Vet International Self Tap Screws, Cruciate, J0406D, 3.5mm x 19mm, 6 Count
The 9/64" self-tapping screw has similar pull-out resistance to 3.5mm cortical screws. The main problem with this screw has been a lack of suitable bone plates. Our new range of 3.5mm round-hole plates considerably widens the scope of these self-tapping screws. Cruciate head. 6/pk.
Med Vet International Trocar-Screw Starter Kit, J0250L
IM pin starter kit comes with autoclavable pin bag. Please specify IM pin style desired. Kits include:0.9mm — (.035") k-wire 6 ea.1.1mm — (.045") k-wire 6 ea.1.6mm — (.062") k-wire 6 ea.1.6mm — 1/16" IM pin 2 ea.2.0mm — 5/64" IM pin 2 ea.2.3mm — 3/32" IM pin 2 ea.2.6mm — 7/64" IM pin 2 ea.3.0mm — 1/8" IM pin 2 ea.3.4mm — 9/64" IM pin 2 ea.3.8mm — 5/32" IM pin 2 ea.4.5mm — 3/16" IM pin 2 ea.6.0mm — 1/4" IM pin 2 ea.
Med Vet International Self Tapping Screw, J0404O, 2.7mm x 57mm, 6 Count
For use with 2.7mm (7/64") round-hole plates in small- to medium-sized patients. 6/pk.
Med Vet International Locking Screw 2.7mm x 38mm Star, J1133TQ, Each
Locking Screw 2.7mm x 38mm Star, J1133TQ, Each
Med Vet International Self-Tapping Screw, J0419QS, 2.7mm x 38mm, Each
Use with 2.7mm compression and 2.7mm reconstruction plates to obtain compression at a fracture site. Self-tapping threads sold in single packs.Self-Tapping screws save time and work extremely well in most circumstances especally in the proximal tibia for TPLO and TTO.Screw. Self-tapping threads. 38mm L. Stainless Steel.
Med Vet International Cancellous Screw, J0419EC, 3mm x 14mm, Each
2mm pilot. 2.5 hex head. Self-tapping. Single pack.
Med Vet International Cortical Screws, J0419P, 2.7mm x 36mm, 6 Count
2.7mm Cortical Screw. Use with 2.7mm compression and 2.7mm reconstruction plates to obtain compression at a fracture site.
Med Vet International External Fixation Rod, J0371RMC, 3/16" x 4", Each
Carbon fiber ESF bars offer two advantages over conventional stainless. They are radiolucent and lighter in weight but comparable in strength. Note carbon fiber need to cut with a saw versus stainless pin cutters.
