Animal Surgical Devices
Tube sets for Instech P720 peristaltic pumps, .093in ID silicone, straight through configuration (P720/NCA fittings required), 1ft (30cm) long. Package of 5, nonsterile.
The Instech P720/TS‑093S is a 1ft (30cm) straight‑through tube set for P720 peristaltic pumps, using .093in ID silicone tubing to support the highest flow range in the P720 series. Designed for use with P720/NCA fittings, these non‑sterile tube sets provide connector‑free inlet and outlet routing and are supplied in packs of five for smooth, reliable fluid transfer in research applications.
Features
- 1ft (30cm) straight‑through silicone tube set
- .093in ID tubing for high‑flow P720 operation
- Requires P720/NCA straight‑through fittings
- Packaged in sets of five, non‑sterile
- Compatible with all P720 peristaltic pump models
Instech Very-low-flow peristaltic pump, 10683:1 motor delivers flow rates from 0.8-200l/min.
The Instech P720/10K is the very-low-flow model in the P720 series of compact peristaltic pumps. It is designed to deliver the precise, pulse-free flow rates of a syringe pump for applications like microdialysis and mouse infusion without the volume limitations of a syringe. Its analog circuitry is specifically designed to minimize electromagnetic radiation for use near sensitive intracellular recordings.
Features
- Type: Very-low-flow miniature peristaltic pump
- Flow Rate Range: 0.8 µL/min to 200 µL/min (0.05 to 12 mL/hr) depending on tubing size
- Accuracy: Better than ±5% with linear speed control (0-100 dial)
- Construction: Precision-machined pump head with a Swiss-made motor and spur gearhead
- Power Source: Universal 15VDC AC adapter or internal 9V lithium battery backup
- Compatibility: Mates with single and dual-channel P720 tube sets
Tube sets for Instech P720 peristaltic pumps, .020in ID silicone, straight through configuration (P720/NCA fittings required), 1ft (30cm) long. Package of 5, nonsterile.
The Instech P720/TS‑020S is a 1ft (30cm)straight‑through tube set for P720 peristaltic pumps, built with .020in ID silicone tubing for precise low‑flow delivery. Supplied in packs of five, these non‑sterile tube sets provide connector‑free inlet and outlet routing when used with P720/NCA fittings, supporting accurate and smooth operation in research infusion and perfusion setups.
Features
- 1ft (30cm) length for flexible pump integration
- .020in ID silicone tubing for low‑flow pumping
- Straight‑through design for use with P720/NCA fittings
- Non‑sterile tube sets supplied in packs of five
- Compatible with all P720 peristaltic pump models
- Ideal for precise infusion and perfusion applications
Swivel mount on lid for Techniplast / Nalgene metabolism cage, slotted to permit removal of tethered animal. Holds Instech swivels for rat infusion or blood sampling.
The Instech METAMOUNT/SL is a specialized swivel mount designed for Tecniplast (Nalgene) metabolic cages. It firmly fixes a fluid swivel above the cage to facilitate continuous infusion or blood sampling while the animal is in a metabolic environment. The "SL" designation indicates it includes a slotted lid, which allows for much easier removal of the tethered animal without disconnecting the fluid lines.
Features
- Type: Swivel mount for metabolic cages
- Compatibility: Fits standard 8in (20cm) diameter Tecniplast or Nalgene metabolic cages
- Lid Design: Slotted cage lid to permit easy removal of a tethered animal
- Components: Includes vertical and horizontal mounting bars, hardware, and a pre-drilled lid
- Application: Holds Instech plastic or stainless steel swivels for rat or mouse research
- Optional Upgrade: Also available as the SMCLA/METASL which adds a counter-balanced lever arm
Rod mounting clamp for Instech P720 peristaltic pumps.
The Instech P720/RMC is a rod mounting clamp designed to secure any of the P720 series peristaltic pumps to standard laboratory ring stands or lattice frames. This allows the pump to be positioned at the ideal height and orientation for laboratory setups such as tissue perfusion or continuous infusion.
Features
- Type: Laboratory rod mounting clamp
- Compatibility: Fits all P720 series pumps, including the P720, P720/10K, and P720/66
- Function: Securely attaches the pump to standard 0.5in (12.7mm) laboratory rods
- Application: Frees up bench space and allows for precise positioning near the subject or organ chamber
- Installation: Attaches to the rear of the pump housing using existing mounting points
World Precision Instrument Large Animal Stereotaxic, Base and Frame Only
The Parallel Rail Animal Stereotaxic Instrument provides superior performance. Up to six manipulator arms may be conveniently positioned on the two parallel rails. Thus, several probes may be independently positioned in one animal.
Ace Glass, Inc. Manifold, air sampling, #50 Ace-Thred to 2inch tube end, 24inchlength, (5) #7 Ace-Thred ports
Manifold, air sampling, #50 Ace-Thred to 2inch tube end, 24inchlength, (5) #7 Ace-Thred ports
Tube sets for Instech P720 peristaltic pumps, .062in ID silicone with male and female luers. Package of 5, nonsterile.
The Instech P720/TS‑FL062SLL is a luer‑to‑luer tube set for P720 peristaltic pumps, built with .062in ID silicone tubing and fitted with a female luer on one end and a male luer on the other. Supplied non‑sterile in packs of five, these tube sets support higher low‑flow and mid‑flow applications while providing secure, low‑dead‑volume luer connections for research infusion workflows.
Features
- .062in ID silicone tubing for higher low‑flow ranges
- Female luer inlet and male luer outlet connectors
- Packaged non‑sterile in sets of five
- Compatible with all P720 peristaltic pump models
- Suitable for infusion, perfusion, and general research applications
Spring for Instech rat tethers, .093in ID, .016in wire, five 12in (30cm) lengths, non-sterile.
The Instech PS95 is a replacement tether spring for rat infusion tethers, featuring a .093in inner diameter and .016in wire gauge to provide the proper balance of strength and flexibility for standard rat tether assemblies. Each non‑sterile spring measures 12in (30cm) in length and is supplied in packs of five for constructing or refurbishing durable tether systems used in infusion or sampling studies.
Features
- .093in inner diameter sized for rat tether applications
- .016in wire gauge for reliable flexibility and durability
- 12in (30cm) spring length
- Non‑sterile replacement springs
- Packaged in sets of five
Tube sets for Instech P720 peristaltic pumps, .031in ID silicone with male and female luers. Package of 5, nonsterile.
The Instech P720/TS‑FL031SLL is a luer‑to‑luer tube set for P720 peristaltic pumps, made with .031in ID silicone tubing and fitted with a female luer on one end and a male luer on the other. Supplied non‑sterile in packs of five, these tube sets provide secure, low‑dead‑volume connections suitable for mid‑range low‑flow infusion and perfusion applications.
Features
- .031in ID silicone tubing for mid‑range P720 flow rates
- Female luer inlet and male luer outlet connectors
- Packaged non‑sterile in sets of five
- Compatible with all P720 peristaltic pump models
- Ideal for precise infusion, perfusion, and general research workflows
Replacement universal power adapter for Instech P720 perstaltic pumps. 100-240VAC, 50-60Hz; plugs for US, Europe, UK.
The Instech P720/ACDC is a universal replacement power adapter for the P720 series of compact peristaltic pumps. It is designed to provide consistent power for laboratory applications such as infusion and tissue perfusion, ensuring the pump can operate at its precise low-flow rates. The adapter includes interchangeable plugs to support various international electrical standards.
Features
- Type: Universal AC/DC Power Adapter
- Compatibility: Designed for P720, P720/10K, and P720/66 peristaltic pumps
- Input: 100-240VAC, 50-60Hz
- Output: 15VDC, 1A
- Connector: 2.5mm male plug with positive (+) tip
- Plugs Included: Support for US, Europe, UK, and Australia
Instech Stainless steel catheter / tubing coupler, 23ga x 8mm. Nonsterile. Package of 100.
The Instech SC23/8 is a stainless steel catheter coupler used to connect implanted catheters to external infusion tubing. Sized at 23ga and 8mm in length, it provides a compact, secure, low‑dead‑volume junction suitable for small‑animal infusion and sampling workflows. The rounded edges protect tubing from damage, and the couplers are supplied non‑sterile in packs of 100 for laboratory use.
Features
- 23ga stainless steel straight catheter coupler
- 8mm length for compact catheter‑to‑tubing connections
- Rounded edges to minimize tubing wear
- Non‑sterile; packaged in sets of 100
- Connects implanted catheters to external infusion lines
Instech Multi-syringe rack with withdrawal bracket, 6-10 for Harvard Apparatus PHD Ultra, upgrade at purchase (703024A)
The HA3024A is a multi-syringe rack upgrade for the Harvard Apparatus PHD Ultra™ syringe pump. This hardware expansion includes a withdrawal bracket, allowing the pump to perform both infusion and withdrawal across multiple syringes simultaneously. It is designed to significantly increase throughput by holding up to ten smaller syringes or six larger syringes, making it an essential tool for high-capacity rodent infusion or sampling studies.
Features
- Application: High-capacity multi-syringe infusion and withdrawal
- Compatibility: Designed for PHD Ultra™ series syringe pumps
- Capacity: Holds up to ten 0.5ml–20ml syringes or six 30ml–60ml syringes
- Function: Includes a withdrawal bracket for bidirectional fluid movement
- Efficiency: Increases study throughput by dosing multiple subjects at once
- Installation: Factory-installed upgrade when ordered at the time of pump purchase
Med Vet International Sterile IV Administration Set, 10dr/mL, 100in with Injection Site, Luer Slip, 50/Case
Our IV administration sets feature universal kink-resistant tubing with smooth action roller clamp, and Y injection site. Available in 10, 15, 20 and 60 drop per mL Compatible with both bottles and bags. Roller clamp controls flow rate of intravenous medication or fluids. Sterile Luer Slip Meets a wide range of solution administration requirements. Tubing Length: 100'