Animal Surgical Equipment Accessories
Instech 22ga single channel Plastic Swivel (blue), luer inlet, sterile
Plastic Swivels
For Tethered Infusion or Sampling with Mice and Rats
Plastic Swivels from Instech deliver reliable, cost‑effective performance designed for researchers who prefer fresh fluid‑path components, these swivels feature durable plastic bodies paired with the same proven self‑adjusting seals used in our stainless‑steel models—ensuring smooth, leak‑free operation through even long‑term studies.
Each swivel includes a convenient clamp for quick connection to standard Instech spring tethers, with color‑coded bodies for easy gauge identification. Available in three sizes, with or without luer inlets, and supplied EtO‑sterilized or integrated into ready‑to‑use infusion kits. Compatible with PS95 rat and PS62 mouse tethers.
- One channel for infusion or sampling
- Self-adjusting seals
- Includes plastic swivel-to-tether clamp (22ga mate with PS95-based rat tethers)
- Individually packaged and EtO sterilized
Instech Luer stub, 14ga (dark green) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS14 is a non‑sterile 14‑gauge dark‑green luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS14 is supplied non‑sterile in a pack of 100 for high‑flow infusion and sampling workflows.
Features
- Gauge: 14ga (dark green hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing‑to‑syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless‑steel, blunt and deburred
- Sterility: Non‑sterile
- Package Configuration: Pack of 100
- Use Case: High‑flow infusion and sampling workflows in preclinical research
Bound Tree Medical VanishPoint 1cc TB Syringe, 100/Box
Syringe and Needle, VantagePoint Retractable, 1cc TB, 25 ga x 5/8", 100/box, 10151
Instech Mouse tail vein cannula, 29ga, 5cm Pebax tube, PinPort and injector
The Instech C10SS-MTV1429P is a mouse tail vein cannula combining a sharp 29ga stainless steel introducer with a 5cm (2.0in) Pebax extension tube for quick, controlled venous access. Its integrated 25ga white PinPort connector supports low-dead-volume closed-system dosing, and the set includes a PNP3M injector for immediate PinPort access. Individually EtO sterilized, this cannula offers reliable performance for precise mouse tail vein infusion and sampling workflows.
Features
- 29ga stainless steel introducer
- 5cm (2.0in) Pebax tubing (0.4x0.8mm)
- Integrated 25ga white PinPort connector
- Includes PNP3M injector
- Sharp tip for clean tail vein entry
- Individually packaged and EtO sterilized
Instech PE-50 tubing, .023x.038in (0.6x1.0mm), 30m (98ft) spool, non-sterile. Fits 22ga.
The Instech BTPE‑50 is a PE‑50 low‑density polyethylene tubing with a .023x.038in (0.6x1.0mm) profile, providing a stiff, low‑permeability flow path ideal for external infusion or sampling connections. Designed to fit 22ga swivels, couplers, and luer‑based components, it is supplied non‑sterile on a 30m (98ft) spool for general laboratory research use.
Features
- PE‑50 low‑density polyethylene tubing
- .023x.038in (0.6x1.0mm) dimensions
- 30m (98ft) non‑sterile spool
- Fits 22ga swivels, couplers, and connectors
- Good compound compatibility and low air permeability
- Not for intravascular or human use
Instech Mouse tail vein cannula, 29ga stainless steel, 25cm Pebax tube, female luer (ReCathCo 0099EO)
The Instech C10SS-MTV1301 is a mouse tail vein cannula featuring a 29ga stainless steel introducer attached to a 25cm (9.8in) Pebax tube for smooth venous access during infusion or sampling procedures. Its bonded female luer provides a secure connection point, while the sharp tip and lightweight tubing support reliable tail vein entry. Supplied with a needle guard and luer cap, it offers low-dead-volume performance suited for precise mouse IV dosing workflows.
Features
- Mouse tail vein cannula with 29ga stainless steel introducer
- 25cm (9.8in) Pebax tubing
- 29ga segment: 0.18x0.33mm dimensions
- Pebax segment: 0.4x0.8mm dimensions
- Bonded female luer for secure connection
- Includes needle guard and luer cap
- Approx. 35µL dead volume
- Sharp tip for clean tail vein entry
Med Vet International MINI-SPIKE Air-venting w/ luer slip, 5/Pack, J0591D
MINI-SPIKE Dispensing Pins. DEHP-free. Latex-free. MINI-SPIKE Dispensing Pin Utilizes a bacterial retentive air-venting filter. Luer slip connector. 5pk.
Med Vet International Trocar-Trocar I. M. Pin, 3/16" x 12", J0250H
I. M. Steinman Pin, Trocar-Trocar, 3/16" x 12", Each
Med Vet International Jorvet Micro Bore "T" Extension w/ Luerlock, J0467R
Same configuration as JOR467s, only with smaller micro-bore tubing. Sterile.
Med Vet International Cancellous Screw, Fully-Threaded, 4.0 mm x 24mm, J0424H, 6 Pack
4mm Cancellous Screw, Full Thread. Use as cancellous screws where greater screw-bone interface is desirable. 6/pk.
Med Vet International Cancellous Lag Screw 4.0mm x 22mm L, J0425G, Each
4mm Cancellous (Part Threaded) Lag Screw. For use as a lag screw without overdrilling of proximal fragment. 1/pkg.
Med Vet International Lightweight Infusion Pump, J1060Q, Each
JorVet Lightweight Infusion Pump will work with all quality IV sets. Standard IV set (10, 15, 20, or 60 drops/ml), or micro drip IV set (60 drops/ml). IV Line Warmer: A major feature of this pump is the IV fluid warmer on the side of unit. Part of the IV line can be wrapped around this heating coil. The IV Fluids can be warmed (25-40°C or 77-104°F). Use of this feature is at the discretion of the operator. Specifications: • Easy to Navigate Settings/Menu • LCD Display: Easy to read bright display • Pumping mechanism: Peristaltic Finger mechanism • Flexible IV Set Choice: Can program up to 40 different brands of IV sets. • Infusion rate options: Set at mls/hr, drops/minute or volume/time • Flow rate accuracy: +/- 5% (after calibration) • Audio and visual alarms: Air-in-line, Upstream occlusion,Downstream occlusion, Infusion finished, No operation, Battery low, Motor error, AC power lost, Heater failure