Animal Surgical Equipment Accessories
Braintree Scientific Partial Body Irradiation Shield, 1.375"" dia, No Flank
Partial Body Irradiation Shield for mice,1.375" dia.fixture The shields are not suitable for 360 degree irradiation (typical of a Cs source), and they are limited for use in units that produce energies less than 350kVp (X-Ray). The fixtures are to be used with fixed beam X-ray sources projecting vertically and do not protect the exit side of the irradiated specimen. A shield designed for use with a Cs source typically requires 4 times the lead thickness. These shields are " (6.35mm) lead, and the attenuation factor depends on the kVp energy they are used with. Attempts to use our shields with a Cs source will result in inadequate shielding and overexposure to protected areas of an animal. The shields are regularly used in the Orthovoltage energy range (<320 kVp) and provide about a 100X attenuation. See Attenuation Curves for a better evaluation. **Sold for research purposes only and not for human use**
Braintree Scientific Universal Irradiation Shield, Left Flank
Universal Irradiation Shield fits both 1" and 1.375" restrainers. The shields are not suitable for 360 degree irradiation (typical of a Cs source), and they are limited for use in units that produce energies less than 350kVp (X-Ray). The fixtures are to be used with fixed beam X-ray sources projecting vertically and do not protect the exit side of the irradiated specimen. A shield designed for use with a Cs source typically requires 4 times the lead thickness. These shields are " (6.35mm) lead, and the attenuation factor depends on the kVp energy they are used with. Attempts to use our shields with a Cs source will result in inadequate shielding and overexposure to protected areas of an animal. The shields are regularly used in the Orthovoltage energy range (<320 kVp) and provide about a 100X attenuation. See Attenuation Curves for a better evaluation. **Sold for research purposes only and not for human use**
Braintree Scientific LoVol Port, Mini Port only- attaches to a 3F catheter
LoVol™ PortUltra-low dead volume port for CSF infusion and withdrawal Ultra-low dead volume of Lovol Port is the port of choice for any application requiring minimal dead volume, i.e. an unusually expensive test article of CSF collection. Available in 2 sizes, MIN-LoVol and MID-LoVol, with reservoir volume only 10% of the Solomon MIN and MID standard SoloPorts. LoVol ports can be accessed with standard 22ga and 24ga huber needles and infusion sets. **Sold for research purposes only and not for human use**
Braintree Scientific Magnification Loupe, flip up, sports frame glasses, 3.5x mag
Magnifying Surgical Loupes - How to Choose the Right Product? Magnification in 2X, 3.5X, and 4 X Strengths - A 3.5x and 4X magnification surgical loupe reveals incredible detail but comes with a small field of view (30MM.) Your working distance has to be maintained more accurately, too. Choose a 4X loupe if you want to focus on a narrow work area and need to see the details that a higher magnification affords. A lower 2.5X magnification results in wider field of view (50MM) and lets you monitor a broader work area. Because of their greater depth of field, 2.5X surgical loupes allow more freedom of movement as they are less sensitive to changes in your working distance. Working Distance - Working distance is the approximate distance between your eyes and the object you work on. **Sold for research purposes only and not for human use**
Braintree Scientific Gas Anesthetizing Box, 10"" x 8"" x 8""
Gas Anesthetizing Box For use with rodents. The .25" thick transparent plastic anesthetizing box allows for constant observation while anesthetizing. Helps protect against accidental overdosing. For use with rats and mice. Easy to move machine tooled sliding top. Made of durable plastic, this box should last for years. Not for use with liquid organic solvents. **Sold for research purposes only and not for human use**
Braintree Scientific Single Temp Controller, 30 degrees C, use with Cat#: GETP
Single Temp Power Supply - Provides a single constant plate temp. Use with Cat#: GETP, NOTE: Final plate temp is dependent on room temp. Choose from 30C, 34C, or 38C **Sold for research purposes only and not for human use**
Braintree Scientific Single Temp Controller, 34 degrees C, use with Cat#: GETP
Single Temp Power Supply - Provides a single constant plate temp. Use with Cat#: GETP, NOTE: Final plate temp is dependent on room temp. Choose from 30C, 34C, or 38C **Sold for research purposes only and not for human use**
Braintree Scientific Microvette 100; 100 ul, conical inner tube Lithium-Heparin
Microvette 100/200; Provides all the benefits of a universally suitable capillary blood collection system. The Microvette 100/200 offers the ideal solution for collection of even the smallest blood volumes. Preassembled end-to-end capillary ensures a controlled collection to capillary technique. The Microvette enables blood sampling using either the special rim or gravity-flow principle without any problem. **Sold for research purposes only and not for human use**
Braintree Scientific 9mm EZ Clip Remover
The EZ Clip™ Ideal for use with lab animals or in veterinary surgery. Racks of 9mm clips are individually packaged in heat sealed, peel-away sleeves for cleanliness, ease of handling and storage. EZ Clips™ are packaged 20 clips on a rack, with 5 racks per strip (100 clips total). They can be purchased by the strip, 2 strips (200 clips) or by the case (1000 clips). Clips are pyrogen free and non-sterile. However, the autoclavable plastic packaging allows for sterilization of the clips without removing them from the packaging. The EZ Clip Applier is a stainless steel applying forcep that holds one rack of 20 clips. Works like a staple gun to apply clips to wound. The clips are fed by rustless beryllium-copper springs. The EZ Clip Remover™ is also stainless steel and can be used to remove all sizes of wound clips. **Sold for research purposes only and not for human use**
Braintree Scientific Grace Procedure Board w/Magnetic Base
Grace Procedure/Dissection Boards - The New Standard for small animal surgery, procedure, & dissection platforms Boards are made of 1" thick high density polyethylene (HDPE) with excellent chemical resistance, easy-to-clean, solid work surface. Magnetic Base System includes corner magnets for holding metal accessories and recessed steel bars for use with magnetic accessories. Grace Procedure/Dissection Board w/ Magnetic Base System (GPM1)Non-skid feet for added stability. Size: 12" (L) x 8" (W) Grace Procedure/Dissection Board w/ LED, Magnifier, & Magnetic Base System (GPM2)Two Flexible LED lights - provides direct illumination with no shadows and no heat. Flex arm, non-obstructive rimless magnifying glass (main lens: 2.3X, inset lens: 4.0X). (Allows continuous eye contact with object when moving into magnification area). Non-skid feet for added stability. Universal input power supply (100 – 240 VAC, 50-60 Hz). Size: 12" (L) x 9.5" (W).
Braintree Scientific Grace Procedure Board w/Magnetic Base, LED, & Magnifier
Grace Procedure/Dissection Boards - The New Standard for small animal surgery, procedure, & dissection platforms Boards are made of 1" thick high density polyethylene (HDPE) with excellent chemical resistance, easy-to-clean, solid work surface. Magnetic Base System includes corner magnets for holding metal accessories and recessed steel bars for use with magnetic accessories. Grace Procedure/Dissection Board w/ Magnetic Base System (GPM1)Non-skid feet for added stability. Size: 12" (L) x 8" (W) Grace Procedure/Dissection Board w/LED, Magnifier, & Magnetic Base System (GPM2)Two Flexible LED lights - provides direct illumination with no shadows and no heat. Flex arm, non-obstructive rimless magnifying glass (main lens: 2.3X, inset lens: 4.0X). (Allows continuous eye contact with object when moving into magnification area). Non-skid feet for added stability. Universal input power supply (100 – 240 VAC, 50-60 Hz). Size: 12" (L) x 9.5" (W).
Braintree Scientific Fish Fin Ear Punch Pincher, 2.75mm punch
Fish Fin Punch Pincher - These pinchers were developed after having several testimonies from customers with sore wrists and thumbs from using small ID punchers. The Fish Fin Punch Pincher relieves stress on wrist during ID marking as it requires a very gentle pressure to cut a hole. Stainless steel puncher has a sloped edge which provides a cut rather than a punch, which minimizes animal discomfort. Autoclavable, but should be lubricated afterwards for long and trouble free usage. **Sold for research purposes only and not for human use**
Braintree Scientific Single Temp Controller, 38 degrees C, use with Cat#: GETP
Single Temp Power Supply - Provides a single constant plate temp. Use with Cat#: GETP, NOTE: Final plate temp is dependent on room temp. Choose from 30C, 34C, or 38C **Sold for research purposes only and not for human use**
Braintree Scientific Filter for RadDisk Micro, single mouse unit
Filter for RadDisk **Sold for research purposes only and not for human use**
Braintree Scientific Dyets Powder Feeder Jar only
Dyets Powder feeding jar. 100% stainless steel top for easy cleaning and durability. Set contains jar, lid, and follower. **Sold for research purposes only and not for human use**