Overhead Stirrers
Chemglass Life Sciences Dura-Drive Overhead Motor, 120V
Easy mounting bracket with 'peg and grommet' design Twist-lock, power cord plug safely prevents disconnection from power source.Dura-Drive overhead motors are designed for use with SS or PTFE impellers to stir media or other liquids in bio reactor vessels and spinner flasks.A CLS-1440 overhead drive adapter is required with this motor.Includes power supply.
Cole-Parmer Compact Digital Mixer System, 50 to 2500 rpm, 115/230 VAC with Plug Adapter Kit
This compact, digital mixer is perfect for smaller scale mixing needs throughout your laboratory. The maintenance-free brushless DC motor provides speeds from 50 to 2500 rpm. The LED display lets you make precise speed adjustments and ensures repeatability. The motor housing is lightweight molded nylon, resistant to the occasional splash and spill. Mixer housing includes an integrated stand clamp that allows for quick and secure mounting to the included stand. The stainless steel collet, with set screws, accepts 1/4" (6-mm) shafts.
J Kem Scientific Inc MINIATURE OVER-HEAD STIRRER
OHS-1 Miniature Over-Head Stirrer, <1Lb. Weight, Incredible 91 in-oz of power, Low voltage - Sparkless, Hand-sized. This part contains both part # OHS-1M - MOTOR FOR OHS-1 STIRRER and OHS-DSC - DIGITAL SPEED CONTROLLER for OHS-1 Stirrer.
Cole-Parmer Caframo Compact Digital Lab Mixer, 40 to 2000 rpm, 120/230 VAC
Caframo Compact Digital Lab Mixer, 40 to 2000 rpm, 120/230 VAC
Chemglass Life Sciences Stirrer, Arrow, Heavy Duty, 0-1000 MAX RPM, 117.6 in-oz Constant Torque, 1/10 Hp Motor
Stirrer, Arrow, Heavy Duty, 0-1000 MAX RPM, 117.6 in-oz Constant Torque, 1/10 Hp Motor. Variable speed stirrer is specifically designed for heavy duty viscous materials. The totally enclosed non-ventilated motor, keeps corrosive fumes and dust out for a long and trouble free service life. The permanent magnet DC motor provides maximum constant torque through entire speed range. The eye level heavy cast aluminum control box is integrated with the motor and has an on/off switch along with a speed control knob. Stirrer is protected from overload with a manually resettable circuit breaker. Electric stirrer is supplied complete with a 9/16" Diameter x 10" long aluminum support rod, 6ft 3-wire grounded plug, and a 3/8” diameter x 12” long stirrer shaft having a 2-1/2" diameter stainless steel propeller.
Chemglass Life Sciences Stirrer, Arrow, Air Driven, High Torque, 8-170 RPM, 100.0 in-lbs Constant Torque, 49:1 Gear Ratio
Stirrer, Arrow, Air Driven, High Torque, 8-170 RPM, 100.0 in-lbs Constant Torque, 49:1 Gear Ratio. Air driven stirrer for use when an electrical stirrer may be hazardous or impractical. Ideal for mixing all types of solvents, lacquers & volatile chemicals without the possibility of spark ignition. Motor accepts air input line pressure from 35 to 1000 PSI & delivers up to 1/3 Hp @ 80 PSI. A needle valve controls the mixing speed. A muffler ensures quiet operation. Supplied complete with a 9/16" Diameter x 10" long aluminum support rod, 4ft length of air hose w/ double fittings for connection to air supply, & a 3/8” diameter x 12” long stirrer shaft having a 2-1/2" diameter S.S. propeller.CONSTANT TORQUE VALUES GIVEN AT A PRESSURE OF 80 PSI.PLEASE NOTE: FOR LONG LIFE OF YOUR AIR POWERED STIRRER, IT IS RECOMMENDED THAT THE AIR SUPPLY BE FILTERED TO REMOVE OIL AND WATER AEROSOLS. IN ADDITION, AN AUTOMATIC AIR LINE LUBRICATOR MUST BE INSTALLED IN THE AIR LINE JUST AHEAD OF THE MOTOR.
Research Products International Corp Overhead Stirrer for Tissue Homogenizing
This compact stirrer delivers the necessary speed and power for latissue homogenizing, tissue, stirrer, mixing, homogenizing, grinders, 903475, Wheaton Industries Inc. electronic control allows precise selection of speeds from 1,000-10,000 RPM. Designed for use with tissue grinders having a steel rod and PTFE pestle. Support stand not included.
Grainger Motor 1/2 HP 3 450 rpm 48Y 115V
The Grainger 14L702 is a Westward bench vise that features a 120 volt AC motor with forward and reverse switch, a 5 inch jaw width, and a maximum opening capacity of 5 inches. This heavy duty vise has a 550 pound load capacity and is constructed with a rugged cast iron body and anvil. The vise comes with swivel capability and replaceable hardened steel jaws. Overall dimensions are 15 inches x 7.5 inches x 7.5 inches. This product weighs approximately 35 pounds and is ideal for automotive, industrial, or home workshop use.