Stirrer Accessories
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 45° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences PTFE Insert/Bushing, 19mm
PTFE Insert/Bushing, 19mm. Replacement part for CG2077H series of PTFE stirrer bearings.
Chemglass Life Sciences Stirring Shaft, 10mm, Button Style, for 100mL to 5000mL Flasks, 455mm OAL
Stirring Shaft, 10mm, Button Style, for 100mL to 5000mL Flasks, 455mm OAL. A 10mm precision ground stirrer shaft to fit CG-2070 through CG-2072 10mm bearings. Side button for attachment of CG-2080 or CG-2081 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2079.
Chemglass Life Sciences 10mm Stirring Shaft, Chem-Stir, Polished, For Use With 300mL-500mL Flasks, 405mm OAL, Complete with PTFE Nut and Bolt
10mm Stirring Shaft, Chem-Stir, Polished, For Use With 300mL-500mL Flasks, 405mm OAL, Complete with PTFE Nut and Bolt. A 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2077. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2074 ground shaft. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2074.
Chemglass Life Sciences Vortexing Marine Style Impeller Blade for 15L Bio Reactors used with 15mm Shaft
Marine style impeller blades are available in two styles, Vortexing and Scoping. The 3 through 7 liter sizes fit the 8mm shaft of the agitator assembly, while the 15 liter size fits the 15mm Shaft size. CLS-1385-36 and CLS-1385-37 are for use with CLS-1385-35 agitator assembly. These blades are used primarily for mammalian cell culture work. Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
MSC Albion Caster, Rigid, Polyurethane, 5 in Wheel Diameter, 350 lb Capacity
This caster is a rigid top plate model designed for reliable performance in material handling applications. It features a durable polyurethane wheel with a 5-inch diameter, capable of supporting a load of up to 350 pounds, making it suitable for various industrial and commercial settings.
- Polyurethane wheel material for durability
- 5 inch wheel diameter
- 1-1/4 inch wheel width
- 350 lb load capacity
- Plate mounting for secure attachment
- Overall height of 6-3/16 inches
- Zinc finish to resist rust and corrosion
- Equipped with a 3/8 in diameter hollow axle with lock nut
- Suitable for material handling applications
MSC E.R. Wagner Rigid Caster, 5 inch Hard Rubber Wheel, 145 lb
This rigid top plate caster features a durable 5 inch hard rubber wheel, a Delrin bearing, and a 145 lb load capacity, making it suitable for light-duty applications. It is constructed with hardened-heat treated components and finished with corrosion-resistant zinc coating.
- Features a durable 5 inch hard rubber wheel.
- Equipped with a Delrin bearing for smooth operation.
- Offers a 145 lb load capacity.
- Constructed with hardened-heat treated components.
- Finished with a corrosion-resistant zinc coating.
- Designed for light-duty applications.
MSC 80/20 Inc. Dual Roller Bearing, Nylon, Series 40, M8x1.25
This dual roller bearing is engineered for use with Series 40 profiles. It is constructed from durable nylon, ensuring reliable performance, and features an M8x1.25 thread size for secure integration.
- Constructed from nylon
- Designed for use with Series 40 profiles
- Features an M8x1.25 thread size
- Available in black color
MSC Albion Caster Wheel, Polyurethane on Cast Iron, 6 inch Dia, 3 inch Wide, Roller Bearing
This caster wheel features a durable polyurethane tread chemically bonded to a cast iron core, providing excellent floor protection and quiet, non-marking operation. Designed for high-capacity applications, it offers resistance to various elements, ensuring reliable performance in demanding industrial environments.
- 0.5-inch thick, high-capacity polyurethane tread
- Protects floors from damage
- Non-marking to maintain clean surfaces
- Delivers quiet operation
- Provides easy rolling
- Resistant to oil and grease
- Resistant to water
- Resistant to mild chemicals
- Resistant to metal debris
- Operates effectively in temperatures from -40°F to +180°F