Stirrer Accessories
Med Vet International HDE Evolution Drive Shaft, 1.2m, 47", J1410D12, Each
Evolution (HDE) QuickFlex Drive Shafts for Evolution Water-Cooling System n J1410d12 Size (Length) 1.2 Meter 47"
Chemglass Life Sciences Replacement Glass Shaft, 500mL Internal Spinner Flask
Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.
Chemglass Life Sciences Replacement 19mm Stirrer Shaft, Reactor Size: 10L/15L/20L Unjacketed, Fits Support Frame: CG-1965-X-150, Overall Length: 29-3/16"
Replacement 19mm Stirrer Shaft, Reactor Size: 10L/15L/20L Unjacketed, Fits Support Frame: CG-1965-X-150, Overall Length: 29-3/16". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Chemglass Life Sciences Stirrer Bearing, Macro, Jacketed, Glass, for 10mm Shaft, 29/42 Inner Joint
Stirrer Bearing,Macro, Jacketed, Glass, for 10mm Shaft, 29/42 Inner Joint. Similar to CG-2070, but water jacketed to control bearing temperature. For use in moderate vacuum with a CG-2074 or CG-2075 ground 10mm stirrer shaft. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences Stirring Shaft, PTFE Covered SS, 485mm OAL, 81mm OD Anchor Style Blade, Fits 500mL Reactors
Stirring Shaft, PTFE Covered SS, 485mm OAL, 81mm OD Anchor Style Blade, Fits 500mL Reactors
Chemglass Life Sciences Stirrer Assembly, Macro, Chem-Stir, 19mm x 48mm Blade Fits 50mL-100mL Flask, 24/40 Bearing, 10mm OD x 445mm Stirrer Shaft
Stirrer Assembly, Macro, Chem-Stir, 19mm x 48mm Blade Fits 50mL-100mL Flask, 24/40 Bearing, 10mm OD x 445mm Stirrer Shaft. Assembly consists of a 10mm OD Chem-Stir™ stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.
Grainger Shaft Grounding Ring For 1 7/8 in Shaft
The AEGIS Shaft Grounding Ring is a one-piece stainless steel ring that provides a path to ground for induced shaft voltages. It has a split-ring design that allows easy installation without shaft removal. This grounding ring fits shafts from 1-3/4" to 3-15/16" diameter and has a durable construction that provides long service life. It comes with oxide-piercing stainless steel mounting screws for solid electrical contact. The one-piece design eliminates the need for hinges or springs. This is an effective and convenient option for shaft grounding in electric motors, generators, turbines, and other rotating equipment.
Chemglass Life Sciences Replacement Inserts for 10mm Nylon Chuck
Replacement Inserts for10mm Nylon Chuck (CG2039A040).
Chemglass Life Sciences Replacement Glass Shaft Only, 7mm OD, for 1L Hanging Bar Spinner Flasks
Replacement Components for CLS-1410- and CLS-1411-Series Spinner Flasks.The Replacement Shaft consists of the glass shaft only.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 1 to 2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 1000mL-2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, Glass Agitator, Four-Blade, 400mm OAL, for 100mL to 250mL Reactors, 42mm OD Agitator
Stirring Shaft, 10mm, Polished, Glass Agitator, Four-Blade, 400mm OAL, for 100mL to 250mL Reactors, 42mm OD Agitator. Shaft is precision ground and polished to fit our CG-2076 and CG-2077 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The straight glass blades are spaced 90° apart and angled 15°. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.
Chemglass Life Sciences PTFE Impeller Assembly, 108mm OAW x 222mm OAH, for 3L Spinner
Our PTFE impeller assemblies are designed to provide agitation forvertical side arm (VSA) vessels and spinners when used withcap adapter and Dura Drive overhead motor.PLEASE NOTE: STAINLESS STEEL IMPELLER ASSEMBLIES ARE AVAILABLE AS SPECIAL ORDER.
Chemglass Life Sciences PTFE Impeller Assembly, 171mm OAW x 337mm OAH, for 8L VSA
Our PTFE impeller assemblies are designed to provide agitation forvertical side arm (VSA) vessels and spinners when used withcap adapter and Dura Drive overhead motor.PLEASE NOTE: STAINLESS STEEL IMPELLER ASSEMBLIES ARE AVAILABLE AS SPECIAL ORDER.