Centrifuge Adapters
Research Products International Corp Adapter Plate for Handyfuge Plate Centrifuge, 2/pk
Handy adapter plate is for use with RPI's Handyfuge Plate Centrifuge. Adapter fits into opening if user's plate is greater than 15mm high.
Enterprise Technology Solutions Dell AC Adapter,130 W - 120 V AC, 230 V AC Input - 19.5 V DC Output - 6.67 A
Dell AC Adapter,130 W - 120 V AC, 230 V AC Input - 19.5 V DC Output - 6.67 A
ILEX LIFE SCIENCES LLC Biocolor Fastin Elastin Dye Dissociation Reagent Assay Component 90 ML 1/EA
Biocolor Fastin Elastin Dye Dissociation Reagent Assay Component (3 x 30 ml) contains guanidine HCl and propan-1-ol Fastin Elastin Assay is a quantitative colorimetric dye-binding method for analysis of elastins released into tissue culture medium and extracted from biological materials It uses a 5 10 15 20-tetraphenyl-21H 23H-porphine tetra-sulfonate (TPPS) dye label Elastin forms that can be measured as -elastin soluble tropoelastins lathyrogenic elastins insoluble elastins (following solubilization to elastin polypeptides [ -elastin -elastin]) IN VITRO soluble elastin secreted into cell culture medium may be measured directly Tropoelastin is the elastin form usually found in medium during in vitro cell culture IN VIVO an extraction method of insoluble elastin from tissue and conversion to soluble -elastin or soluble -elastin is given After solubilization the samples are assayed by the procedure described for soluble elastin Sensitivity 5 g Assay Time 4 hrs
Chemglass Life Sciences Vertical Holder; Holds (6) 50mL, (6) 15mL, and (12) Microtubes (Not Shown)
NOTE: VORTEX-GENIE 1 MAY ONLY BE USED WITH POP-OFF CUP AND 3" PLATFORM.
Pipette Supplies, Inc. EASYPET 3 SILICONE ADAPTER
Silicone adapter that fits between the aspirating cone and the filter.International Part # 4420801004EP 022236105Made in Germany
Leica Biosystems Tube attachment with two camera documentation ports for Leica LMD6 (11505223)
Tube attachment with two camera documentation ports designed for Leica laser microdissection systems. It provides selectable 100:100 manual port distribution to route imaging to dual documentation cameras and is specified for use with LMD6 instruments.
- Provides two camera documentation ports.
- Allows manual selection of a 100:100 port distribution.
- Attaches to the observation tube for imaging.
- Enables dual-camera documentation workflows for imaging and capture.
Grainger Adapter 1 in CTS PEX White
The Grainger 16T733 is a 3/4 HP, 115V, 12.8A, 60Hz, 1 phase, TEFC electric motor with a C-face mounting, 56C frame size, and 1.15 service factor. It has a RPM of 1725 at full load and is thermally protected. The motor is designed for continuous duty applications and features a cast iron frame and end bells along with ball bearings for smooth operation. With its powerful 3/4 HP rating, this electric motor is well-suited for driving pumps, fans, conveyors, and other industrial equipment.
Chemglass Life Sciences Chemglass Adapter, Air Inlet/Outlet, M27 - Stainless steel bioreactor air adapter (fits M27 headplate ports)
Stainless steel M27 air inlet/outlet adapter for bioreactors. Designed to provide overlay aeration or to serve as a gas outlet in lieu of a condenser for low aeration-rate or short-term batch applications. Constructed for corrosion resistance and a sanitary finish.
- 316L stainless steel construction with electropolished surface (20 Ra or better).
- M27 threaded connection for headplate ports.
- Hose connection outer diameter: 12.00 mm.
- Suitable for overlay aeration and low-rate gas outlet applications.
- Compatible with common bioreactor headplate ports; replacement silicone O-ring available.
- Designed for use in short-term batch and low-temperature processes.
Braintree Scientific MyFuge12 Mini Centrifuge,adapters only, 5ml (6/pk)
MyFuge12 Mini Centrifuge. COMBI-Rotor™ for tubes and strips. Twice the capacity of traditional mini centrifuges. Near silent operation. Starts and stops with opening/closing of lid. Unlike traditional mini centrifuges, the MyFuge 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor is all that is required for running 12 microtubes and 4 PCR strips simultaneously. With a fixed speed that produces 2,000 xg, this centrifuge is perfect for quick spin downs. Simply close lid and unit quickly ramps up to 5500 rpm. Open lid, and rotor quickly decelerates for removal of samples. At just 5.5" wide and less than 4.5" tall, MyFuge 12 truly is a personal centrifuge with unmatched capacity and flexibiilty. Specifications: Speed: 5,500 rpm/2,000 xg; Capacity: 12 x 1.5/2.0ml tubes, 32 x .2ml PCR tubes; 4 x PCR strips (8 x .2ml); Dimensions: 5.5" x 7.9" x 4.4"/14 cm x 20cm x 11.2cm.
Sigma Aldrich Fine Chemicals Biosciences DuranR super duty beaker c1EA
To avoid thermal stressing of the glass uniform and slow heating of super duty products is recommended.When working at very high temperatures or if rapid temperature changes are expected standard beakers and Erlenmeyer flasks should be used as these are characterized by excellent thermal shock resistance.However the mechanical sturdiness of standard products is limited compared with the super duty range.bullnbspIncreased mechanical sturdiness due to increased uniform wall thicknessbullnbspReinforced sturdy rimbullnbspType 1 glassbullnbspAutoclavable/sterilizable
Hach Company Adapter, 90 Degree with Hose Adapter
Replacement adapter. 14/20 Standard Taper Joint. For use with the Cold Vapro Mercury Set.
Beckman Coulter 30 mm Diameter Conical Tube Adapter, 50 mL, 2/pk
Beige, 30 x 120 mm, four tubes per adapter.
Beckman Coulter Adapter, 392256
The Beckman Coulter Microfuge 18 Centrifuge Adapter, catalog number 392256, is designed to adapt 0.2ml, 0.4ml, and 0.5ml microcentrifuge tubes to the Microfuge 18 centrifuge rotor. It allows centrifugation of up to 18 microcentrifuge tubes at one time. The adapter is made of durable polypropylene and is autoclavable. It fits securely into the Microfuge 18 rotor. This adapter provides a convenient way to spin standard microcentrifuge tubes in the Microfuge 18 benchtop centrifuge.