Microcentrifuges
Compact footprint centrifuges used for small sample sizes, such as microtubes. Ideal for microfilter cell separations and HPLC samples. Available as electronic or handheld manual units; may have digital interfaces and refrigeration capabilities.
Microcentrifuges are specifically designed to accommodate tubes that hold less than 5.0 mL. Although benchtop centrifuges can be fitted with rotors for microtubes, microcentrifuges usually have a smaller footprint, which makes for a less-crowded work area.
As with other benchtop centrifuges, these units can be ventilated (operated without temperature controls) or refrigerated. Most are sold with a rotor, although additional alternate rotors may be available.
Electron Microscopy Sciences EMS MyFuge™ Mini Centrifuge with Blue Lid, 240 V
The MyFuge Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, it is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2 mL PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge.
Electron Microscopy Sciences Gusto High Speed Mini Centrifuge
This compact centrifuge is ideal for most protocols calling for fast spins (up to 12,500 rpm / 9,800 rcf) and quick spindowns. Useful for PCR, microfilter cell separation, clinical applications, and HPLC protocols. Operation is extremely simple for this high-level of sophistication. For duplicate spins, simply reload rotor and push Start. Designed with quick-spin option for commonly used 20-second spins. Includes a toolfree, quick-change rotor system. Safety features ensure the unit will not operate with an open lid, a jammed rotor or when out of balance. Efficiently designed for minimum bench top space.
ILEX LIFE SCIENCES LLC 24 x 12 mm Ossiform P3D Scaffolds, suitable for 24-well plates - gyroid structure, 600-800 micrometers porosity, bone-like 3D cell culture systems
Ossiform P3D Scaffolds are xeno-free, bioceramic scaffolds which provide a bone-like niche for in vitro and in vivo studies such as disease modeling, drug screening and bioengineering. The 3D printed scaffolds are developed to resemble native bone with respect to both physical and structural properties, such as high contents of β-tricalcium phosphate (β-TCP) and stiffness, as well as macro- and micro-porosities. The P3D Scaffolds are an easy plug-and-play solution for 3D cell culturing of bone harboring or bone related cell types. P3D Scaffolds are compatible with most common laboratory techniques and do not require major alterations of preexisting protocols and workflows. P3D Scaffolds provide you with a clinically relevant cell culture system of natural materials and customized structures which allow you to create predictive research models of human physiology and pathology.
RWD LIFE SCIENCE INC MICROCENTRIFUGE
M1324 microcentrifuge is a ventilated model, satisfying most of the common standard applications, Even at the highest speed, it can still work stably and quietly. Also, the compact-design microcentrifuge not only equips a standard 24-place quick-lock rotor (closed with only 1/6 turn) but also adapt PCR tubes and spin column, satisfying different customers’ needs.The microcentrifuge enables your centrifugation simple by providing 10 acceleration and deceleration ramps . Featured with 48 user-defined programs provide quick and convenient setting and parameter use.
Andwin Scientific MYFUGE BLUELID MICROCENTRIFUGE
The Mini Centrifuge is made to work for the centrifugation of microcentrifuge tubes and PCR strips. This product is designed with a quick-release rotor adapter, which does not require extra tools, that can hold either an 8-Place tube or 4x8 PCR strip
GRANT INSTRUMENTS Microcentrifuge/vortex mixer Combi-spin™ to 3500 rpm, inc. rotors for 12 x 1.5ml and 12 x 0.5ml plus 12 x 0.2ml
The Centrifuge/Vortexer Combi-spin PCV-2400 is specially designed for life science research. It can be used in biochemical, microbiological and industrial biotechnology laboratories.A cost-effective fixed-speed combined centrifuge/vortex mixer for combined or independent centrifuge and mixing applications of microtubes and 0.2 ml microtube strips in low volume applications.Centrifugation 2800rpm at 50Hz and 3500rpm at 60Hz.The vortex cup emerges through an opening in the closed lid, enabling individual tubes to be mixed while a full load of tubes is spinning.Very simple to operate - use the left-hand button to select continuous or short spin. A safety interlock stops the rotor when the lid is opened to ensure you and your workplace remain safe.The Combi-spin is supplied as standard with two interchangeable rotors for 12x1.5ml and 12x0.5ml + 12x0.2ml microtubes.
Beckman Coulter Microfuge 16 w FX241.5P
Microfuge 16 microcentrifuge with FX241.5P fixed angle rotor; 100-120 V, 50/60 Hz
Azzota Corp Mini Centrifuge, Come With Exchangeable Rotors, One For 1.5 Ml Microtubes And One For 0.2 Ml Pcr Strip Tubes. Two Adapters, One Is 0.5 Ml And Another Is 0.2 Ml. Speed: 10000Rpm (2200Xg)
Mini Centrifuge, Come with exchangeable rotors, one for 1.5 ml microtubes and one for 0.2 ml PCR strip tubes. Two adapters, one is 0.5 ml and another is 0.2 ml. Speed: 10000rpm (2200Xg)
Alkali Scientific CellPro™ 0.5mL Microcentrifuge Tubes, Lock Cap, Clear, Conical, DNase, RNase & Pyrogen Free, 1000/Pk, 10000/Cs
Our centrifuge tubes could be commonly used to collect cells and separate biomacromolecules by centrifugation in biochemistry and other biological fields. They can also be used to store photosensitive samples and special chemiluminescence reagents. USP VI grade polypropylene material, free from heavy metal. RCF: 30,000 xg. Special safe-lock cap design provides secure lid sealing. Clear graduations and frosted marking area. Easy to open and close. Autoclavable. RNase free, endotoxin level less than 0.1EU.
Alkali Scientific™ Hermle OLEUM Oil Testing Centrifuge, Z600-OL
The Hermle Z600-OL OLEUM Oil-Testing Centrifuge is our stand alone oil testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Alkali Scientific™ C2248 StripSpin™ 12D Digital Mini Centrifuge w/ PCR Strip Rotor
The new Alkali Scientiifc C2248 StripSpin 12D digital mini centrifuge from Alkali is uniquely designed for centrifugation of 12 position PCR strips. It features digital speed control up to 5,500 rpm, timer control up to 99 min., and a safety interlock to stop the centrifuge if the lid is opened during operation. With built in rcf conversion, speed can be set/displayed in rpm or rcf, the Alkali Scientific™ C2248 StripSpin 12D is the perfect solution for centrifugation of up to 4 x 12-position high efficiency PCR strips (or 48 x 0.2ml tubes) and includes a 2 year warranty.
Alkali Scientific Hermle Z167-M Microcentrifuge
The Hermle Z167-M Microcentrifuge is a powerful compact easy-to-use high speed microcentrifuge for labs looking to save valuable bench space but not compromise on speed and power The Hermle Z167-M is compact design houses a powerful maintenance free induction motor that can reach up to 14000rpm/15994 xg The included rotor is an 18-place Accompanied by an easy to use control panel the unique EZ-Scrolltouch pad gives you ease of control and a modern feel Additionally this model features a color changing LED status indicator that lets you know what operating state the unit is in from a distance Whether the unit is running on standby or in sleep mode it is easy to tell from a far with this new feature The advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10 In addition to retrieving saved programs the easy to use front panel can be used to adjust accel/decel rates run time and change the end of run alarm tone
