Microcentrifuges
Compact footprint centrifuges used for small sample sizes, such as microtubes. Ideal for microfilter cell separations and HPLC samples. Available as electronic or handheld manual units; may have digital interfaces and refrigeration capabilities.
Microcentrifuges are specifically designed to accommodate tubes that hold less than 5.0 mL. Although benchtop centrifuges can be fitted with rotors for microtubes, microcentrifuges usually have a smaller footprint, which makes for a less-crowded work area.
As with other benchtop centrifuges, these units can be ventilated (operated without temperature controls) or refrigerated. Most are sold with a rotor, although additional alternate rotors may be available.
NEST SCIENTIFIC USA 500ML CENTR TUBES W/ PREAS 4CS
500mL Centrifuge Tube with Bi-directional Transfer Cap with Silicon Tube (50cm 1/8" ID 1/4" OD), Male Luer Lock Connector with Luer Cap, Vent Filter (0.22 μm Φ24mm), Sterile, 1/pk, 4/cs
Electron Microscopy Sciences EMS MyFuge™ Mini Centrifuge with Green Lid, 240 V
The MyFuge Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, it is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2 mL PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge.
Braintree Scientific Mini Centrifuge, Red, Quantity: 1 each
A New Line of Mini Microcentrifuges The new mini micro-centrifuges will replace the current Spectrafuge™ Mini Centrifuges. Simple and convenient to operate, the new mini microcentrifuges feature greater capacity (8 place MCT and 4 place PCR strip rotors), a quick-release rotor system and electronic brake. Once samples area loaded and the lid is closed, the rotor rapidly accelerates to 6,000 rpm, making it an ideal centrifuge for bringing small droplets to the bottom of tubes for micro-filtrations or basic separations. Mini Microcentrifuge Product Features: Quick release rotor system - no tools needed to exchange rotors! Electronic braking - Allows for more rapid deceleration, less waiting Dual lid switch Compact, ruggeddesign Product Specifications Maximum Speed 6,000 rpm / 2,000 x g Maximum Capacity 8 x 1.5/2.0mL or 4 x 0.2mL strips Dimensions 6.8 x 5.8 x 4.8 in / 17.2 x 14.7 x 12.2 cm Electrical AC 100 - 240V, 50/60Hz
Electron Microscopy Sciences EMS MyFuge™ Mini Centrifuge with Red Lid, 240 V
The MyFuge Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, it is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2 mL PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge.
Beckman Coulter Microfuge 20R w FA241.5
Microfuge 20R microcentrifuge, IVD, w/FA241.5 fixed angle rotor, 120 V/60 Hz
Beckman Coulter Microfuge 20 w FA361.5
Microfuge 20 microcentrifuge, IVD, w/ FA361.5 fixed angle rotor, 120 V/60 Hz
Cole-Parmer Stuart SCF3 Microcentrifuge, 500 to 15,000 rpm; 100 to 240 VAC, 50/60 Hz
This microcentrifuge is small and quiet enough for personal use, but offers advanced features typical of larger benchtop centrifuges. In addition to the user-friendly digital interface, the centrifuge comes with software and a USB cable allowing for remote operation and data acquisition. For safety, the lid remains locked while the rotor is in motion and automatically releases when the rotor comes to a halt. In the event of a power failure, an emergency lid release latch is installed in the base. Program speed or RCF and time, which is saved in onboard memory. Imbalance detection system identifies an asymmetrical load and prevents operation.
Alkali Scientific MyFuge™ 5D Digital Mini-centrifuge for 4×5mL tubes, 5000rpm, 2000×g
MyFuge™ 5D C2205 Microcentrifuge includes a four-position rotor for compatibility with a variety of 5mL test tubes, including 5mL snap cap centrifuge tubes. Additionally, there are four more slots for centrifuging standard microtubes (1.5/2.0mL). No need to swap out the rotor when switching to different size tubes! Simply close the Lid and the centrifuge can accelerate to speeds up to 5500xg using the easy touch controls. Open the Lid, and the rotor decelerates to a stop for removing samples. The 5mL rotor positions accepts 5mL centrifuge tubes (snap cap and screw-cap) directly. While 5mL blood and culture tubes (12x75mm) and cryovials are also accepted with the included adapters.The microtube positions are designed to accept 0.5 and 0.2mL tubes with the use of optional adapters.
USA Scientific Inc 5430 cent rotary knob
Eppendorf 5430 microcentrifuge with 30-place rotor, 17,500 rpm, 30,130 x g, 120 V, 60 Hz
RESEARCH PRODUCTS INTERNATIONAL CORP HERMLE HGH SPD MICROCNTRIFGE
502723507 HERMLE HGH SPD MICROCNTRIFGE
Electron Microscopy Sciences Dri-Bath™ Modular Block for 0.2 ml Microcentrifuge Tube, 79 Wells, 2059Q
Close contact of tubes to block walls, provides excellent heat transfer. Block includes thermometer well for monitoring block temperatures. Solid black anodized aluminum blocks for better heat retention. Block Puller included with all models. For use with all our brand modular dri-baths.
Wells: 79 Wells
Model: 2059Q
Opening: 0.24"(0.61 cm) taper